The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear stabilisers to maximise this newfound speed advantage. With minimal span changes (just 7mm between them) and drastic chord reduction down to 55, 50, 45, 40 and 35mm, we found positive gains in speed, control, balance and feel. The Skinnies have inherited many of the same characterises that make our Progressive range so popular, like the precise feel and seamless turn initiation plus recovery. They are very low drag and free up speed and turning. Heavier riders and those less experienced will gravitate to the 55, 50 and 45 chord models, those who are lighter and or have greater experience might opt to reduce drag in the extreme and try the 40 or 35mm chord options.The Skinny rear wings inspire confidence by providing a more comfortable ride at speed, they reduce the normal buildup of front foot pressure that can be associated with high-speed foiling. They are a perfect match to ARTPRO foils, but keep in mind, your HPS, ART, PNG and even BSC, will equally benefit from the Skinny high-performance DNA.
The Sonar High Aspect Front Wing Series is engineered for the highest speed and efficiency possible across a range of disciplines – from kite foiling to prone foil surfing. With this style of wing, you need minimal pump and power to generate glide. The shorter chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability and a slightly longer radius turn than a lower aspect ratio wing of the same size. The wingtips are refined to ensure there is no ventilation when you tip breach, giving you the ability to crank tighter radius turns at higher speeds, without losing speed. The larger HA1450 is ideal for dock starts, pumping to connect wave after wave, coastal runners or stealing wakes. Downwinding: Ocean swells move faster in the open ocean – slower in shallow water or closer to the coast. The faster you move through the water, the more choice you have to choose a more efficient line. The smaller the wing, the less planing surface = less lift and higher stall speed. The HA Series Wings are designed for lighter / more experienced riders to foil in faster-moving ocean swells.
653 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T6
KITE FOIL
WING FOIL
SURF FOIL
Connection SystemKraken Modular System
DisciplinesKite - Surf - Wing
Front Wing Connection TypeT6
653 mm aluminum fuselage, with T6 front wing connection type (small chord and M6 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear stabilisers to maximise this newfound speed advantage. With minimal span changes (just 7mm between them) and drastic chord reduction down to 55, 50, 45, 40 and 35mm, we found positive gains in speed, control, balance and feel. The Skinnies have inherited many of the same characterises that make our Progressive range so popular, like the precise feel and seamless turn initiation plus recovery. They are very low drag and free up speed and turning. Heavier riders and those less experienced will gravitate to the 55, 50 and 45 chord models, those who are lighter and or have greater experience might opt to reduce drag in the extreme and try the 40 or 35mm chord options.The Skinny rear wings inspire confidence by providing a more comfortable ride at speed, they reduce the normal buildup of front foot pressure that can be associated with high-speed foiling. They are a perfect match to ARTPRO foils, but keep in mind, your HPS, ART, PNG and even BSC, will equally benefit from the Skinny high-performance DNA.
FUSION HYBRID BASE KIT
HIGH PERFORMANCE - DURABILITY
Sizes: 70 / 90 CM MAST
Das völlig neue Fusion Ecosystem setzt einen neuen Maßstab für Cabrinhas Foil Design und Herstellungsmöglichkeiten. Leistung und Funktion stehen im Mittelpunkt des Designprozesses.
Jedes Einzelteil wurde hinsichtlich seiner Komponenten, als auch seiner Verbindungsstellen neu optimiert. Dabei besteht die Möglichkeit jedes Teil im System in sich auszutauschen. Diese mühelose einfache Handhabung ermöglicht zusammen mit der neuen X:Series Wing Range somit verschiedenste Foil Setups, die sich auf Deine Bedürfnisse individualisieren lassen, egal ob du mit Kite, Wing, Paddel oder als Surf/Prone unterwegs bist.
Wir laden dich mit Stolz ein, dir deine Traumsession selbst zusammenzustellen...
Das Fusion Hybrid ist eine effiziente Zusammenstellung an erstklassigen Komponenten, die in einer unglaublich steifen und hydrodynamischen Foil-Konstruktion resultieren. Das Fusion Hybrid lässt sich nahtlos in alle 9cm-Foil-Boxen nach Industriestandard integrieren.
Die neu gestaltete Fuselage-Verbindung ermöglicht es, den Mast fest und sicher zu montieren; und kann so den vertikalen und horizontalen Kräften widerstehen, die in allen Foildisziplinen auftreten.
DESIGN PROFILE
Haltbarkeit, Langlebigkeit und unübertroffene Steifigkeit in einem Alu Setup.
MAST FEATURES
Feste Top Plate mit m8 Slots für eine einfache Montage
3-Schraubenverbindung für extrem hohe Steifigkeit
Eloxiertes Aluminium 6061-T6 in Luftfahrt-Qualität
Konische Präzisions-Fuse-to-Mast Verbindung für optimale Steifigkeit
Helicoil-Inserts für minimierte Korrosion und lange Lebensdauer
Wasserdichte Hohlkonstruktion für optimales Verhältnis von Festigkeit zu Gewicht
FUSELAGE FEATURES
CNC- bearbeitetes, eloxiertes Aluminium 6061-T6 in präziser Luftfahrt-Qualität
Helicoil-Inserts für minimierte Korrosion und lange Lebensdauer
Auswechselbare Rear Fuselage für optimale Leistung und einfaches Reisen
343mm Rear Fuselage für eine überragende Manövrierfähigkeit
Ergänzend zu erwerben: 416mm Fuselage für eine perfektes Balance von Stabilität und Benutzerfreundlichkeit
Versenkte Montagefläche für Stabilizer sorgt für minimalen Luftwiderstand
Im Set inkludiert:
Mast, Rear Fuselage, Travel Bag, 8pcs m6 ss316 torx TiN-beschichtete Schrauben und Torx Tool.
Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
The 750mm mast is mostly used on bigger surf, downwinders and more advanced riding or as a surfy option for kite foiling.
Other mast sizes available:
450mm (15.7 inches),
600mm (23.6 inches),
680mm (26.6 inches),
750mm (29.5 inches),
1050mm (41.3 inches)
MASTS & FUSELAGES AL 3.0SIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90
Unsere stark verbesserten AL3.0 Masten und Fuselages sind unglaublich steif und direkt, fast 20% leichter und kommen mit verbessertem Strömungsverhalten als die Vorgängermodelle. Ein neuer Trimm macht die Foils deutlich verspielter ohne Abstriche bei der Nutzerfreundlichkeit einzugehen.Unser Team hat nicht nur monatelang auf dem Wasser getestet, die Entwickler unserer Foils haben die Kräfte, Geschwindigkeiten und unterschiedliche Anströmwinkel der verschiedenen Situationen beim Foilen analysiert und auf dieser Basis ein neues Mastprofil und Fuselages mit deutlich geringerem Widerstand entwickelt, dabei den Trimm entscheidend verbessert und das Gewicht massiv reduziert ohne Abstriche der Festigkeit des gesamten Systems zu machen. Die AL 3.0 Foils fahren sich verspielter und direkter und decken eine noch größere Bandbreite an Bedingungen und Könnenstufen ab.Wähle die Mastlänge und Fuselage entsprechend deines Fahrlevel, der Bedingungen und deiner Präferenzen:Mast Optionen:• 60 cm – spezielle Größe für flache Gewässer• 75 cm – All-round / Entry / Freestyle - Standardlänge für die meisten Wingfoiler auf Seen. Super für den Einstieg und sehr kompaktes verhalten bei Sprüngen und Rotationen für progressive Freestyler. Surf- und SUP-Foilen bei allen Könnensstufen in kleineren Wellen• 82 cm – All-round / Surf / Freestyle / Downwind - Unser neuer Allrounder-Mast für Wing Foiler, die nach dem perfekten Mix aus Kompaktheit zum Freestylen und gleichzeitig ausreichend Länge zum Wingen in Wellen suchen. Surf- und SUP-Foiler in mittelgroßen Wellen. Freestyle Windsurf Foiler• 90 cm – Freeride / Surf / Downwind - Wing Foiler, die nach extra Länge für Komfort in Wellen und größerer Dünung suchen. Standardlänge für Windsurf FoilerFuselage Optionen:• 68 cm – “Advanced” – Surf / Freestyle - Fortgeschrittene Wing Foiler, die ein manöverorientiertes Setup mit direkten Reaktionen und hervorragendem Pop für Sprünge suchen. Fortgeschrittene Surf- und SUP Foiler• 78cm – “All-round” – Entry / Freeride / Pump - Vom Wingfoil-Einsteiger bis zum Könner, mit der Option den Back Wing entsprechend des Fahrlevels zu positionieren. Surf-, SUP- und Pump-Foiler, die nach einem einfachen Setup mit guter Kippstabilität und hervorragenden Pump-Eigenschaften suchen• 90cm – “Windsurf” – All-round - Für Windsurf Foiler aller Könnensstufen, mit einem einfachen und stabilen Flug mit viele Kontrolle auch bei höherer Geschwindigkeit
FUSION V-SERIES TAIL STABILIZERS
HIGH ASPECT
SIZES: 180 / 230 / 285
One of the biggest effects on hydrofoil performance comes from the stabilizers. In a sport that is so diverse in its attributes and styles of riding, you need to have the right product to help you get the maximum performance from your system. Introducing the new V-Series Stabilisers. V represents versatility, and through the modular Fusion system, you are able to custom tailor your ride. Add a V-Series Stabiliser to any of the Cabrinha Fusion foils and get ready for the next step in performance & usability.
Features:
Optimal efficiency and maneuverability
Flat center, to downward tips, for perfect balance between locked-in feel and agility
Single molded components for minimal drag
Full prepreg carbon construction
PMI core for superior strength to weight ratio
180 cm², WS-340, AR-6.42
230 cm², WS-400, AR-6.96
285 cm², WS-450, AR-7.11
Set Includes:
Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws, {(ear fuselage not included)
The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly. At the back, the cradle for the stabilizer is designed with the right angle to make the front wing fly with ease and efficiency.
The FUSELAGE CARBON is built in pre-preg carbon with a foam core to keep the weight extremely light. Some solidly anchored brass inserts are used for all fastenings.
Best maneuverability
Better responsiveness
Ultra-light carbon construction
Weight: 0.18Lenght: 33 cm
Our carbon fuselages are available in different sizes. A longer fuselage will bring more stability, while a shorter fuselage will help with sharp and quick turns.
The MA1200 Front Wing is your go-to wing for when the breeze is up or for bigger waves. Balanced feel and powered-up performance, with exceptional maneuverability. Suitable for Kite, Wing, Surf and Tow Foiling.
Features
Higher speed top end performance
Extremely fast and responsive turning radius
Incredibly efficient
Insane glide and pumpability
Materials
Carbon Pre-preg
SURF / FREESTYLE / PRONE / KITE
Aufbauend auf dem Erfolg unserer Carve Wings, war es das Ziel für den Carve 2.0, die Leistung dieser Mid Aspect Wings weiter zu optimieren.
Unsere Teamfahrer wollten noch mehr Gleitleistung, Speed und geringeren Widerstand. Das alles bei verbesserter Manövrierbarkeit und Beibehaltung der altbekannten Kontrolleigenschaften bei hoher Geschwindigkeit.
Wir haben entschieden, ganz von vorne anzufangen und so ziemlich alle Designparameter zu ändern: Höhere Streckung, neue Kontur und höhere Aspect Ratio, neue Outline und Twist entlang des Wings.
Und nicht nur das: Jede einzelne Größe wurde individuell auf den jeweiligen Einsatzbereich abgestimmt.
Der größere 1430 hat zum Beispiel das geringste Aspektverhältnis und das dünnste Profil, für maximale Manöverfähigkeit und geringstmöglichen Strömungswiderstand. Auf der anderen Seite hat unser 850 die höchste Aspect Ratio und das dickste Profil, um den Auftrieb zu verbessern und den Strömungsabriss bei einem so kleinen Flügel zu verzögern.
Der Carve 2.0 ist der ideale Flügel, wenn du "echte Wellen" ansteuern willst. Was er im Vergleich zum Free oder Glide an Gleitleistung einbüßt, macht er mit höherer Endgeschwindigkeit und viel mehr Manövrierbarkeit auf der Welle wieder wett.
Der Carve 2.0 ist auch die bevorzugte Wahl unseres Freestyle-Teams bei der GWA World Tour. Mit diesen Wings gehen die Rider mit mehr Speed und explosivem Pop in die Jumps. Das mittlere Aspektverhältnis bedeutet auch, dass die harten Landungen die Ausrüstung weniger beanspruchen.
Durch die mittlere Aspect Ratio eignet sich der Carve 2.0 auch sehr gut zum Kite Foilen, wo sich die Rider aggressiver auf den Mast stützen können, ohne dass die Wing Tips aus dem Wasser ragen.
Wenn du als fortgeschrittener Winger einen Flügel sucht, der sich aufregend verspielt fährt und in sehr vielen Bedingungen zu Hause ist, dann ist der Carve 2.0 die Antwort! Vom Wing Foilen in großen Wellen bis hin zu High Speed Runs auf dem Kite Foil – der Carve 2.0 deckt vieles ab!
The MA1350 Front Wing is a mid-aspect ratio wing ideal for all rider weights. Easily generates lift without pumping. This performance wing is fast turning, with early planing ability for lighter wind conditions or heavier riders. Suitable for Kite, Wing, Surf and Tow Foiling.
Features
Higher speed top end performance
Extremely fast and responsive turning radius
Incredibly efficient
Insane glide and pumpability
Materials
Carbon Pre-preg
Freefoil | SurfBalanced by design.Even, predictable flight. Easy, steady takeoffs. And super smooth turns. The larger size imparts a more balanced flight behavior at all speeds. The dihedral curvature lets you tilt the foil into turns like a skateboard for a smoother cruising behavior. Gybes, tacks, 360s, and transitions are much easier since you can feel your back wing and use it to pivot the foil. A high-quality lightweight carbon and PU foam construction is more complex to build than a pure carbon wing but the weight savings is worth it.Delivery: Stabilizer only.Sizes:Stabilizer: 300cm2Features:
PU CARBON SANDWICH: Very light and responsive.
DIHEDRAL STABILIZER: Smooth, balanced gybes.
Freefoil | SurfKeep your precious foil looking new. The set includes a Tool Pouch and cover for the Front Wing, Stabilizer, Fuselage, 71 or 92cm Mast, and Mast Base. The 420 denier Nylon covers fit neatly in the optional Foil Bag that’s designed for traveling and busy airports. Five-millimeter closed-cell foam padding and additional edge polyester webbing protect all trailing edges. The handy tool pouch keeps all your hardware and tools in one place. Even the mast cover features a screw pocket. Now, you're covered.Delivery:Component covers and tool pouch.Measurements:
Front Wing Cover 1250: ca. 80 x 32 cm / ca. 32 x 12 inches
Stabilizer Cover 300: ca. 45 x 18 cm / ca. 18 x 7 inches
Fuselage Cover 70: ca. 77 x 10 cm / ca. 30 x 4 inches
Mast Cover 92: ca. 98 x 17 cm / ca. 38 x 7 inches
Mast Cover 71: ca. 78 x 17 cm / ca. 31 x 7 inches
Mastbase Cover: ca. 26 x 13 cm / ca. 10 x 5 inches
Tool Pouch S: ca. 25 x 13 x 8cm / ca. 10 x 5 x 3 inches
Features:
5MM PADDING: Thick padding for maximum protection.
420 DENIER NYLON: Tough. Durable.
FOIL BAG READY: Designed to fit into the optional Foil Bag.
FUSION X-SERIES WINGS
HIGH PERFORMANCE
Sizes: X950 / X1300 / X1600 / X1950
Das Highlight der letzten 5 Jahre war die Entwicklung von Hybrid- und Crossover-Technologien, die mittlerweile in jeglichen Sportarten zu finden sind. Nirgendwo wird dies deutlicher als beim Foilen. Hydrofoilen ist heute zum gemeinsamen Nenner aller Surf- und Windsportarten geworden.
Aus diesem Grund benötigt es ein Hydro Wing-Set, das nicht nur zwischen diesen Sportgenres mühelos wechseln kann, sondern auch in der Lage ist, in allen Disziplinen kompromisslos zu performen. Das Design der X Series™ erkennt und nutzt die wichtigsten Features, die beim Hydrofoilen benötigt werden. Auftrieb, Effizienz und Kontrolle sind die drei Treiber, die die hohe Performance und den geschmeidigen Lauf der X Series ausmachen.
Durch die feine Abstimmung von Outline und Flügelprofil liefert die X Serie einen sanften Lift und eine stabile Flugphase, die präzise Manöver und ein hohes Maß an Kontrolle erlauben.
Die Effizienz der X Serie wird durch unser völlig neues Cab Fusion Mast und Fuselage-Ecosystem verbessert. Beim Cab Fusion handelt es sich um ein von Grund auf neu konzipiertes System, bei dem jeglicher unerwünschte "Spielraum" beseitigt wird, der durch Strömungskräfte zwischen Wings und Fuselage normalerweise entsteht. Die daraus resultierende verbesserte Steifigkeit und der minimierte Wasserwiderstand machen die Wings der X Serie zu einem völlig neuen Kaliber an Hydrofoils.
Die X Series ist in 4 Größen erhältlich, um einen unglaublich großen Bereich an Einsatzmöglichkeiten und Fahrergewichtsklassen abzudecken. Wenn du mehr als eine Sportart ausübst, kannst du dir sicher sein, dass sich das erstaunliche Performanceniveau der Foils über alle Genres hinweg ziehen wird.
DESIGN PROFILE
Gekrümmtes LE, gerades TE, schlankes, nach vorn geneigtes Profil, mäßiger negativer V-Winkel.
WING FEATURES
Lockeres und agiles Fahrgefühl für eine überragende Manövrierbarkeit.
Optimale Effizienz & Lift
Integrierte Fuselage mit konischem Mast fit
Überlegene Torsionssteifigkeit und minimaler Strömungswiderstand
Volle Prepreg Carbon Konstruktion für ultimative Performance
EPS-Kern für perfektes Verhältnis von Festigkeit zu Gewicht
Effizienter Lift durch moderatem negativen V-Winkel
Fehlerverzeihend und vorhersehbarer, früher Lift dank nach vorn geneigtem Profil
TECH SPECS
X950- 950cm^2, WS 630mm, AR 4.2, Vol 1.18L
X1300- 1300cm^2, WS 780mm, AR 4.7, Vol 1.6L
X1600- 1600cm^2 WS 900mm, AR 5.05, Vol 2L
X1950- 1950 cm^2, WS 1000mm, AR 5.13, Vol 2.5L
Im Set inkludiert:
Front Wing, Wing Covers.
The AXIS PNG 1150 Carbon Front wing is the biggest of our newest generation of high aspect wings, focusing on longest and most efficient gliding and pumping.
The AXIS PNG 1150, together with the 1300, 1010 and the 910, 910B and 850 form our Pump and Glide wing family.
The Pump and Glide wings are designed to be easy and early to lift for their size. The have tons of control, and feel comfortable for most levels of riding. Our Glide wings pump unreal, and glide effortlessly and endlessly. And they are fast wings, but their focus is not to be the fastest wing on the market. But instead, to be the easiest high aspect wing that almost everyone can ride, and can improve their level of riding right away.
The PNG 1150 is the biggest wing of the Glide collection. It's in fact the longest wingspan wing we have ever made! We wanted a wing that will lift very very early, and would glide endlessly, w/out slowing down.
The PNG 1150 wing was designed to dominate the smallest foiling conditions. From light wind WING Surfing, to tiny bumps SUP and SURF foiling, to effortless lift behind the BOAT, and DOCK starts and PUMPING, the AXIS 1150 performs like no other high aspect wing ever dreamed of. The amount of glide and pumping ability of the AXIS 1150 is tremendous. And probably this is why our testers nominated the AXIS 1150 as the WING SURFING wing.
The PNG 1150 carbon wing connects to the red fuselages with 3 x M8, 20mm screws. At 1150mm wingspan the AXIS 1150 is a massive wing, nearly twice as stiff as the 1010, benefiting from the AXIS PNG rigidity and stiffness of engineering and construction.
As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil.
AXIS PNG 1150
Technical Data:
WINGSPAN: 1150 mm / 45.25 inches
MAX CHORD: 180mm
ASPECT RATIO: 7.72
ACTUAL AREA 1778 square cm / 276 square inches
PROJECTED AREA: 1713 square cm / 265 square inches
VOLUME: 2116 cubic cm / 129 cubic inches
Recommended use:
WING Surfing for all levels and light / medium conditions
Downwinding - Lighter wind / smaller waves
SUP / Surf - Tiny bumps and endless gliding
Wake foiling - Early lift / easiest pump
Pump Foiling - Endless
Windsurf foiling - early and super easy lift
Rear Wing Options:
500mm Carbon for max control, stability and slower ride (entry levels)
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
440mm Carbon for control and stability (all levels)
400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate)
390mm Carbon for Wing and Surf with good turning control and additional glide
370mm Carbon for loose feel and fast turning, with less stability (intermediate).
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase the AXIS PNG 1150mm carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
The S483 can be used with any wave wing in our collection and will allow you to shorten the turn radius while maintaining a high entry speed and releasing energy during pumping.
STABILITY
MANEUVERABILITY
TOP SPEED
PRESSURE
EASE OF USE
ALL-ROUND
This stabilizer was created to give freedom and speed to our big front wings.
The S483 can be used with any wave wing in our collection. The inverted tip design will allow you to shorten the turning radius compared to the S450 stabilizer, maintaining a high entry speed and releasing energy during pumping.
280,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...