ZEN CARBON RACE
The Carbon Race is a very fast wing that we recommend for experienced users only… Attach this wing and you’ll know what it means to be blasting over the water on a foil!
It has a relatively small surface area, and turns on a dime.
Surface: 510cm2
Span: 64cm
Aspect ratio: 8,0
CARBON RACE STABILIZER
Thin profile stabilizer compatible with Carbon Race Wing.
Surface: 220cm2
Span: 38cm
ZEN G10 RACE
Very fast wing for experienced users, thanks to this wing one
will be able to get to know what blasting on a foil really means.
Turns well, relatively small surface, experienced users only.
Surface: 510cm2
Span: 64cm
Aspect ratio: 8,0
KITE 810 COMPLETE
Freeride
For S25 Naish is pushing forward with creating a foil that is aimed at beginner-to-advanced riders looking for improved performance at the top end. The Kite 810 front wing features a medium-high aspect delta planform, mild center span anhedral, and washed out flattened wingtips for low drag and a balanced, easy feel. This wing is smooth with early takeoff and a wider range with higher speed and control. For improved pumping and top end speed we’ve paired it with the Jet HA 280 stabilizer. Wings are not the only things that are new, the S25 foils feature a redesigned fuselage and mast as well. The fuselage is lighter and has stainless steel helicoil inserts to further reduce potential corrosion. The 95 cm mast has been completely redesigned to be stiffer in both bending and torsional flex and is 25% lighter than previous years. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and stiffer board connection system.
PERFORMANCE FEATURES
Kite 810 Front Wing = Improved top speed and control
Jet HA 280 Stabilizer = Great pumping and glide with a high top speed
95 cm Mast = 20% lighter, stiffer and offers more control at any speed
CONSTRUCTION FEATURES
Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
Direct Connect Plate Bonded with Aircraft Grade Extruded Aluminum 95 cm Mast = Solid board connection + sealed mast
Updated Aircraft Grade Aluminum 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
5 x 20 mm Torx Head Stainless Steel Screws (Connects Wings to Fuselage) = Superior torque + corrosion resistant
3 x 25 mm Torx Head Stainless Steel Screws (Connects Mast to Fuselage) = Superior torque + corrosion resistant
4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Connects Plate to Board) = Superior torque + corrosion resistant
SURF FOIL 1600
Surf specific foil ideal for heavy weight & light wind kiting.Large rear wing for versatile performance.1600cm² AK Surf front wing.
The AK Surf Foil Large was developed specifically as a surf foil to perform in small to medium size waves, or for heavier riders over 80kg / 200LBS, in all-around surf or for light wind kite foiling.
The intermediate aspect ratio wings with updated profiles provide the perfect balance between maneuverability, speed, and pumping.
Front Wing: 1600cm2 Rear Wing: 300cm2 Mast: 70cm
FREERIDE FOIL 800
Ideal for intermediate to advanced riders.Low drag monocoque configuration.800cm² front wing.
The AK Freeride Foil features a new generation low-drag monocoque design that offers incredible stiffness, and high-speed performance, without losing the ease of use for intermediate riders.
Front Wing: 800cm² Rear Wing: 260cm² Mast: 95cm
CARVING FOIL 1000
Ideal for lower speed riding, carving & learning.Medium rear wing for versatile performance.1000cm2 Carving front wing.
The AK Carving Foil features our high stability 1000cm2 front wing, for the perfect balance of performance and ease of use. The rear Anhedral High Speed Wing has been designed for improved carving and surfing capabilities. The larger wing provides lift at lower speeds, while the intermediate mast length creates a very stable platform for the entry-level rider, or an advanced rider looking for more maneuver oriented riding.
Front Wing: 1000cm2 Rear Wing: 260cm2 Mast: 80cm
SURF FOIL 1300
Surf specific foil also ideal for light wind kiting.Medium rear wing for versatile performance.1300cm² AK Surf front wing.
The AK Surf Foil Medium was developed specifically as a crossover surf foil to perform in small to medium size waves, and as a light wind, lower speed, kite wing.
The intermediate aspect ratio front wing with updated profiles provide the perfect balance between maneuverability, speed, and pumping.
Front Wing: 1300cm2 Rear Wing: 260cm2 Mast: 70cm
DESCRIPTION
The Universal KSH-Alu set is the tool to enter kite foiling and the windless foil dimension.You can switch the use of this phenomenal set from Kite to Surf to SUP foiling without the need to change your hydrofoil!By using the Universal KSH, you will learn a new way to ride the ocean using a type of motion that was unexplored until today. The combination of a 75 cms mast , a moderate length fuselage of 76 cm creates the perfect balance and the foundation of this modern hydrofoil designed to work at lower speeds.Now your jibes and tacks are going to be SOOOOO easy!! And so will be pumping on flat water or ground small swell.The front wing is the engine of the whole system. Built with a mix of light weight and heat stabilized PU core on the sides and a full carbon center plate to connect it to the fuselage, this extra thick profile wing with a 82 cms wingspan will create the right lift to start foiling at 4 knots of speed! The rear wing is 52 cms wide and has a negative dihedral angle of 154°. This angled wing design improves the “pumping” ability of the foil. the new KSH FLIGHT ALU foil is delivered with a hull flat plate to be used on US boxes slots that allow a precise micrometric trim for your sessions. Welcome to the future of riding the ocean!SURF, KITE, SUP foil only with ONE hydrofoil!
FEATURES
Universal hybrid carbon front wing with thicker profile for unmatched stiffness and lightweight
Universal hybrid carbon rear wing with negative dihedral (anhedral) design to keep foiling during surface jibing. It also helps pumping the board with your feet.
Wider and stiffer Universal ALU mast with extra internal wall thickness and reduced outside profile. The top combination for speed potential and superior control. The most evolved ALU mast in the market today.
Plastic connector at the bottom of the mast allows it to fit to any fuselages from kite to surf foils, and by separating aluminum parts contact it avoids oxidation and corrosion typical when aluminum touches aluminum. Longer lifetime.
KSH alu fuselage with extra wide head area to carry and support super wide wings (up to 120 cms wingspan and 3000 sqcms)
Stainless steel (aisi 316) Helicoil trhreads on mast and fuselage for longest durability and easier to unscrew.
Universal plate (removable). You can change to any mast length for perfect trim and skill level .Makes your packing more compact (no plate mounted sideways inside your bag) and allows to convert your connection into any board attachment system ( 4way screws, tuttle or powerbox to be converted into ws foil use).
Jet 1050 + 1250
Delta-Flügelform mit mittlerer Streckung und moderater Anhedrierung
Optimale Kombination aus frühem Lift, Geschwindigkeit und Drehfreudigkeit
Disziplinen von Windsurfen, Wing-Surfen bis hin zum Downwind-Kite-Foilen und Foil-Surfen in schnellerer, steilerer Brandung
Hervorragende Option für Leichtwind-Kitefoiling und Windsurf-Foiling auf Crossover-Boards
Stabilizer 320 Back Wing: Intuitiveres Drehen und Ansprechen beim Pumpen
Ultraleicht und stabil
Jet 1650, 2000 + 2450
Viele ähnliche Eigenschaften wie ihre kleineren Pendants
Etwas höhere Streckung in einer Delta-Flügelform mit moderater Anströmung
Optimale Kombination aus frühem Lift, Geschwindigkeit und maximale Drehfreudigkeit
Für größere Surfer beim Surf Foiling, SUP, Downwind und Wing-Surf Foiling
Stabilizer 450 Back Wing: Mehr Lift bei niedrigeren Geschwindigkeiten und verbesserte Dreh- und Pumpleistung
Ultraleicht und stabil
Technologie
Naish Aluminiummasten sind sowohl als Direct Connect als auch als Deep Tuttle und Abracadabra Verbindungssysteme erhältlich
Leichter, mit Schaumstoff gefüllter, dreifach stranggepresster Aluminiummast mit verklebten und verschraubten Verbindungen
100% vorimprägnierte, hochglänzende 3K-Kohlefaser-Frontflügel und StabilisatorenCNC-gefräster Rumpf aus leichtem Aluminium mit korrosionsbeständigen M6-Helicoils aus
Edelstahl für die Verbindung von Vorderflügel und Leitwerk
Edelstahl M6 Torx T30 Hardware für alle Verschraubungen
Lieferumfang
Jet HA Front Wing + EVA-Abdeckung
Stabilisator Jet HA + EVA-Abdeckung
Fuselage
Tragekoffer
Torx-Schrauber und erforderliche Schrauben (5x 20 mm M6/4x 30 mm M6 + T Nuts)
Jet 1050 + 1250
Delta-Flügelform mit mittlerer Streckung und moderater Anhedrierung
Optimale Kombination aus frühem Lift, Geschwindigkeit und Drehfreudigkeit
Disziplinen von Windsurfen, Wing-Surfen bis hin zum Downwind-Kite-Foilen und Foil-Surfen in schnellerer, steilerer Brandung
Hervorragende Option für Leichtwind-Kitefoiling und Windsurf-Foiling auf Crossover-Boards
Stabilizer 320 Back Wing: Intuitiveres Drehen und Ansprechen beim Pumpen
Ultraleicht und stabil
Jet 1650, 2000 + 2450
Viele ähnliche Eigenschaften wie ihre kleineren Pendants
Etwas höhere Streckung in einer Delta-Flügelform mit moderater Anströmung
Optimale Kombination aus frühem Lift, Geschwindigkeit und maximale Drehfreudigkeit
Für größere Surfer beim Surf Foiling, SUP, Downwind und Wing-Surf Foiling
Stabilizer 450 Back Wing: Mehr Lift bei niedrigeren Geschwindigkeiten und verbesserte Dreh- und Pumpleistung
Ultraleicht und stabil
Technologie
Naish Aluminiummasten sind sowohl als Direct Connect als auch als Deep Tuttle und Abracadabra Verbindungssysteme erhältlich
Leichter, mit Schaumstoff gefüllter, dreifach stranggepresster Aluminiummast mit verklebten und verschraubten Verbindungen
100% vorimprägnierte, hochglänzende 3K-Kohlefaser-Frontflügel und StabilisatorenCNC-gefräster Rumpf aus leichtem Aluminium mit korrosionsbeständigen M6-Helicoils aus
Edelstahl für die Verbindung von Vorderflügel und Leitwerk
Edelstahl M6 Torx T30 Hardware für alle Verschraubungen
Lieferumfang
Jet HA Front Wing + EVA-Abdeckung
Stabilisator Jet HA + EVA-Abdeckung
Fuselage
Tragekoffer
Torx-Schrauber und erforderliche Schrauben (5x 20 mm M6/4x 30 mm M6 + T Nuts)
Sanfter, früher Take-off und großer Geschwindigkeitsbereich
Stabil und komfortabel
Ausgewogenes, leichtes Gefühl
Kite FW 650
Für fortgeschrittene bis erfahrene Fahrer
Ähnlich wie der Kite FW 810 in kleinerer Version mit höherer Streckung
Mehr Geschwindigkeit und Kontrolle (besonders bei stärkerem Wind)
Medium High Aspect Delta-Planform mit mittlerer Streckung, leichte Anhedrierung in der Mitte der Spannweite und abgeflachte Flügelspitzen für geringen Widerstand
Kite FW 810
Fortgeschrittene Fahrer, die eine verbesserte Leistung im oberen Bereich suchen
Mittelhohe Streckung, eine leichte Anströmung in der Mitte und abgeflachte Flügelspitzen für geringen Widerstand
Kite FW 960
Für Einsteiger, die auf frühen Auftrieb und einfache Progression Wert legen
Elliptische Planform mit geringer Streckung und dünnem Profilschnitt
Extrem sanfte Starts, mit einer gewissen Verzögerung, um maximalen Komfort und Kontrolle zu ermöglichen
Gute, aber nicht einschüchternde Geschwindigkeit
Intuitives Drehen mit einem \"surfigen\" Gefühl
Technologie
Naish Aluminiummasten sind sowohl als Direct Connect als auch als Deep Tuttle und Abracadabra Verbindungssysteme erhältlich
Leichter, mit Schaumstoff gefüllter, dreifach stranggepresster Aluminiummast mit verklebten und verschraubten Verbindungen
100% vorimprägnierte, hochglänzende 3K-Kohlefaser-Frontflügel und Stabilisatoren
CNC-gefräster Rumpf aus leichtem Aluminium mit korrosionsbeständigen M6-Schrauben aus
Edelstahl für die Verbindung von Vorderflügel und Höhenleitwerk
Edelstahl M6 Torx T30 Hardware für alle Verschraubungen
Lieferumfang
Jet HA Front Wing + EVA-Abdeckung
Stabilisator Jet HA + EVA-Abdeckung
Fuselage
Tragekoffer
Torx-Schrauber und erforderliche Schrauben (5x 20 mm M6/4x 30 mm M6 + T Nuts)
WIND/WING HA 914 HALB-KOMPLETTSpeed Performance Wing-Surf & Freeride Windsurf FoilDer Wind/Wing HA 914 ist mit seiner einzigartigen Outline und Foilsektion im Vergleich zu allen anderen Flügeln der Naish-Produktpalette schnell und flüssig. Sein Profil ist dünner als bei allen anderen Naish-Flügeln und bietet Hochgeschwindigkeit bei relativ geringem Auftrieb für die Größe seiner Spannweite. Der HA 914 erfordert eine relativ hohe Startgeschwindigkeit, ist aber sehr stabil, wenn er einmal Fahrt aufgenommen hat, was ihn zu einem fantastischen Flügel für Rennen, Windsurfen oder mittelgroße bis große Surfschirme macht. Unglaubliche Upwind-Performance in Kombination mit einer unübertroffenen Höchstgeschwindigkeit machen den Wind/Wing HA 914 zu einer fantastischen Power-Windfoil-Option.
Erfahren Sie mehr über das neue Rumpf- und Mastsystem HIER
SET BEINHALTET
Wind/Wing HA 914 Frontflügel Stabilisator Jet HA 280 95 cm Rumpf5x 20 mm M6/4x 30 mm M6 + T-MutternEVA FlügelabdeckungenTransportkoffer KONSTRUKTIONSMERKMALE
100% vorimprägnierte, hochglänzende 3K-Kohlefaser-Vorderflügel und -StabilisatorCNC-Präzisionsfräsung des leichten Aluminiumrumpfes mit korrosionsbeständigen M6-Schrauben für den Vorderflügel und die StabilisatorverbindungEdelstahl M6 Torx T30-Hardware für alle Schraubverbindungen
If you're into pushing the envelope in wave riding (Prone, SUP, Wing or Wake) these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected surf experience? Our new Black ADVANCE fuselage configuration is for you. This design sees the mast position advanced 40mm closer to the front foil, opening up entirely new options for surf performance. Our Current Black fuselage range is perfectly suited to the majority of riders across all disciplines, while these new Black ADVANCE fuselages are not intended to replace them but provide options for performance and a more connected feel when pushing the limits. If you are an intermediate or expert surf / wave foiler, this could be a great upgrade for you.
A consideration when moving the mast position on the fuselage forward is that the effective length of the rear fuselage back to the rear stabilizing foil is increased by the distance the mast moves forward. For this reason we are introducing a new fuselage size the ‘Sillyshort’. When choosing your Advance Black Fuselage, it’s advisable to take this into consideration and perhaps opt for a length shorter than you are used to using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead. Available in Ultrashort, Crazyshort and an all new Sillyshort (just 560mm). Compatible with ART and HPS wings, but also suitable for the smaller sizes in our PNG and BSC wings. Compared to our current Black fuselage range, these 3 new little siblings provide a looser, faster transition from side-to-side. The sensation our testers liked it for is similar to the sensation of moving fins forward in the tracks on a surfboard, initiating turns becomes easier, which is great in the surf. There is a small trade-off, this ease of turning comes as at the expense of some tracking and speed stability. (So expect to have a small effect on upwind ability when winging and a need to adjust pumping technique slightly. If you are into ultra high speed big wave riding, you should consider the regular black fuselages instead).With the mast set 40mm further forward on the fuselage, your baseplate position needs to be 40mm further forward in the boxes to position the wings in the same position as the normal Black fuselage.(40mm, 1.57")In an effort to reduce our cardboard footprint, these new Black ADVANCE fuselages come with our new custom fuselage protective covers, and no paper / cardboard boxes.
Black Advance Fuselage (+40mm)
If you’re into pushing the envelope in Prone, SUP or Wake these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected surf experience? Our new Black Advance fuselage configuration is for you.
This design sees the mast position advanced 40mm closer to the front foil, opening up entirely new options for surf performance.
Compatible with ART and HPS wings, but also suitable for the smaller sizes in our PNG and BSC wings.
Available in Ultrashort, Crazyshort and an all new Sillyshort (just 560mm).
Rear Wing MA315 (Medium Aspect):
The MA315 is designed to produce a balanced amount of pitch control and speed. It features a medium aspect ratio with 315cm2 area, with side winglets helping to control yaw movement. The wing is built light and strong using a full carbon fiber layup.
Rear Wing Shims
Rear Wing Shims are for experienced riders looking to adapt the speed, stability and maneuverability to their personal preference. These fit between the Rear Wing and Fuselage to adjust the AOA (angle of attack) of the Rear Wing. The Apex V1 complete foil kit includes -0.5deg, -1deg and -1.5deg shims.
All Apex V1 Rear Wings are factory set at the most stable configuration without a shim to provide incredible pitch and roll stability at slow to medium speeds, combined with enough front foot pressure to assist in learning maneuvers.
AOA – Angle of Attack
In general the performance effects of using negative degree shims to reduce the AOA are:
• Increased top end speed and glide performance
• Front foot pressure decreased, back foot pressure increased
• Decreased pitch stability
The higher the degree value, the greater the effects will be. We recommend starting with the -0.5deg shim, then decreasing the AOA progressively with the -1deg and then -1.5deg to feel the effects and find your preferred setting.
Entry level to intermediate riders – if you feel too much front foot pressure, before fitting a shim to adjust the rear wing AOA, we recommend first adjusting the position of your foil on the board by moving the mast backwards. This will reduce front foot pressure without deceasing stability of the foil.
Foil Guide:
WING FOILSabfoil Medusa PRO Balz Müller LTD - WING | Hydrofoil SetCOMPOSITIONM83K/BALZ - WMP909/BALZ - S370/PF - F663KBag and Q02K includedTOP SPEEDLIFTGLIDEMANEUVERABILITYPUMPINGDisciplinesWingRangeMedusaRecommended forFreestyle Pro - Freestyle - Freeride - Wave - Fast FreerideTake Off Speed10 - 12 knTop End Speed (average 80kg user)25 - 27 knIt is a Medusa PRO... but most importantly, it is Balz Müller's signature model for Sabfoil.This hydrofoil set is an excellent choice for practicing Wingfoil, both in power freestyle, freeride and freerace sessions. It comes with Balz's signature front wing WMP909/BALZ, and with the limited edition mast M83K with Balz's graphics (you can get it only in the kit!)Medusa PRO is the natural evolution of the standard Medusas and everythinhg is about acceleration, stability and pop. In this Balz Pro version, the surface area of the front wing has been increased to allow takeoff at lower speeds, and the dihedral angle was diminished to improve maneuverability and rebound performance after landing for easier consecutive aerial maneuvers. The fact that the dihedral angle has not been brought to zero and the presence of the twist at the tips still ensure an excellent degree of stability during acceleration, fast freeriding and while surfing.Balz's choice of fuselage was F663K, the shortest in our T8 family, and therefore also the most radical and maneuverable.As for the stabilizer, Balz preferred the S370 Flat, for maximum freedom in maneuvering and good speedBag and Titanium Quick Release System (Q02K) included
Mach1 Foil
Wingsurf Foil – Set
Lift your foiling to the next level with the premium Mach1 Wing Foil Set. If you are looking for prime performance, agility and a top-class construction in one package, the Mach1 is the right choice for you. An incredibly stiff and light 90cm carbon mast is pre-set with an integrated Double US Plate adapter for enhanced rigidity at the connection point to your board. The 72cm CNC milled aluminium fuselage provides superb agility for freestyle moves and foiling in waves as well as outstanding pumping performance. No matter if you’re looking for maximum speed, lift or comfort, you can adjust the foil with a large assortment of tuning parts to achieve exactly the right setup for your demands and the conditions you’re foiling in.
TECH FEATURES
ADAPTABLE MODULAR DESIGN
Each Foil Set from the GA Foils collection can be adjusted to your demands thanks to the wide range of interchangeable spare parts. This allows you to tune your basic set for different conditions, riding styles and skill levels without having to replace the complete foil. Just change the front wing, fuselage, mast or box adapter according to your requirements and enjoy the new characteristics of your foil.
CHANGEBALE FRONT WINGS
A wide range of different front wings provides riders of different skill levels and weights with exactly the right setup for various conditions. The FREE front wings in 2500cm², 2000cm², 1500cm², 1200cm² and 900cm² impress with a fine mixture of comfort, performance and lift, while the HP front wings in 1750cm², 1450cm², 1150cm² and 1050cm² aim at highest performance and speed with their higher aspect ratio.
All FREE and HP front wings are compatible both with the Mach 1 and the Hybrid Foil Set.
INTEGRATED ADAPTER
Fin box adapters are integrated into the Mach 1 masts, which leads to outstanding stiffness of the whole foil setup. The Wing Foil Set features a Double US Plate and the Windsurf Foil Set a Deep Tuttle adapter.
MACH1 CARBON MAST
The 90cm Mach 1 mast is made of prepreg high modulus carbon fiber of the highest quality to ensure performance and durability. Its incredible stiffness provides superb control and feeling for the foil setup.
MACH1 ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Mach 1 provides a solid connection to the compatible carbon masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can easily adapt the Mach 1 Foil to foiling with a windsurfing sail.
MACH1 CARBON MAST
The 90cm Mach 1 mast is made of prepreg high modulus carbon fiber of the highest quality to ensure performance and durability. Its incredible stiffness provides superb control and feeling for the foil setup.
MACH1 ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Mach 1 provides a solid connection to the compatible carbon masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can easily adapt the Mach 1 Foil to foiling with a windsurfing sail.
Mach1 Foil
Wingsurf Foil – Set
Lift your foiling to the next level with the premium Mach1 Wing Foil Set. If you are looking for prime performance, agility and a top-class construction in one package, the Mach1 is the right choice for you. An incredibly stiff and light 90cm carbon mast is pre-set with an integrated Double US Plate adapter for enhanced rigidity at the connection point to your board. The 72cm CNC milled aluminium fuselage provides superb agility for freestyle moves and foiling in waves as well as outstanding pumping performance. No matter if you’re looking for maximum speed, lift or comfort, you can adjust the foil with a large assortment of tuning parts to achieve exactly the right setup for your demands and the conditions you’re foiling in.
TECH FEATURES
ADAPTABLE MODULAR DESIGN
Each Foil Set from the GA Foils collection can be adjusted to your demands thanks to the wide range of interchangeable spare parts. This allows you to tune your basic set for different conditions, riding styles and skill levels without having to replace the complete foil. Just change the front wing, fuselage, mast or box adapter according to your requirements and enjoy the new characteristics of your foil.
CHANGEBALE FRONT WINGS
A wide range of different front wings provides riders of different skill levels and weights with exactly the right setup for various conditions. The FREE front wings in 2500cm², 2000cm², 1500cm², 1200cm² and 900cm² impress with a fine mixture of comfort, performance and lift, while the HP front wings in 1750cm², 1450cm², 1150cm² and 1050cm² aim at highest performance and speed with their higher aspect ratio.
All FREE and HP front wings are compatible both with the Mach 1 and the Hybrid Foil Set.
INTEGRATED ADAPTER
Fin box adapters are integrated into the Mach 1 masts, which leads to outstanding stiffness of the whole foil setup. The Wing Foil Set features a Double US Plate and the Windsurf Foil Set a Deep Tuttle adapter.
MACH1 CARBON MAST
The 90cm Mach 1 mast is made of prepreg high modulus carbon fiber of the highest quality to ensure performance and durability. Its incredible stiffness provides superb control and feeling for the foil setup.
MACH1 ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Mach 1 provides a solid connection to the compatible carbon masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can easily adapt the Mach 1 Foil to foiling with a windsurfing sail.
MACH1 CARBON MAST
The 90cm Mach 1 mast is made of prepreg high modulus carbon fiber of the highest quality to ensure performance and durability. Its incredible stiffness provides superb control and feeling for the foil setup.
MACH1 ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Mach 1 provides a solid connection to the compatible carbon masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can easily adapt the Mach 1 Foil to foiling with a windsurfing sail.
Our new aluminum mast with canonical box connection, very stiff with high ventilation resistance. Including baseplate
Compatible with any board that has a Future finbox system.
Fits our v2 fuselage.
easy take off, smooth riding, small pack size
The ENSIS ROCK’N’ROLL AIR Wing Foil Set is for everyone who wants to benefit of an inflatable while enjoying a good board and foil performance. Discoverers love the extra padding when launching or falling and everyone loves the small pack size for easy storing and travelling. Like the ROCK’N’ROLL, the ROCK’N’ROLL AIR bears the signature of Benoît Clément and features a concave outline, giving you great control while launching and flying. The large carbon-fibre track plate provides a direct control and a great board-to-foil feel. The ENSIS TRACKSTER Foil is designed for easy take offs and smooth riding and it is ideally aligned with the ROCK’N’ROLL AIR.
ROCK’N’ROLL AIR Set 1700, 1900
ENSIS ROCK’N’ROLL AIRVolume 145 lSize 180 x 80 x 12 cm
High stiffness – fusion dropstitch technology, double layer railsGreat control – concave outlineReactive foiling performance – large carbon plate
ENSIS TRACKSTER 1700Wing size: 2.5 – 5.2 m2Rider weight: 55- 85 kgWind range: 12 – 28 knts
Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage
ENSIS TRACKSTER 1900Wing size: 3.5 – 6.2 m2Rider weight: 65 – 100 kgWind range: 12 – 20 knts
Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage
Complete Foil Set with Aluminium.includes all Screws, Nuts and Tools for assempling the foilThis foil is perfect for Freeride Winging or Pumpfoiling.the 1700 foil for lighter People or stronger windThe 1950 for heavier people or lighterr wind
ENSIS TRACKSTER 1700Wing size: 2.5 – 5.2 m2Rider weight: 55- 85 kgWind range: 12 – 28 knts
Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage
ENSIS TRACKSTER 1900Wing size: 3.5 – 6.2 m2Rider weight: 65 – 100 kgWind range: 12 – 20 knts
Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage
unlimited carving, playful, ultra pop
The ENSIS INFINITY Wing foil is engineered for ambitious discoverers to experts looking for a maximum performance in freeride, freestyle and wave. The INFINITY is easy to control and offers excellent manoeuverability and agility. It shows a unique performance spectrum from its surface area, offering a great maximum speed whilst maintaining an amazing low-end lift. Two of the impressive characteristics of this foil are; the control you have whilst carving tight turns, and the pop it achieves in take-offs. The INFINITY Wing foil is the perfect mix of playfulness and control to push your limits. It is time to dance and play on the water!
INFINITY 1100, 1400, 1800
Foil Set includes:
New compact Freeride / Freestyle / Wave Foil INFINITY Front Wing / Stabilizer INFINITY Carbon Mast Kraken 83 cm Fuselage INFINITY 70 Kraken /Assembly Screw Set, Foil Mount T-Nut set, Foilbag, Front Cover, Stab Cover, Torx3 Tool
ENSIS INFINITY 1100Max. performance for lighter ridersMax. strong wind performance for medium ridersFreeride, Freestyle, WaveUnlimited carving, playful, ultra pop
Wing sizes: 1.8 – 5.2 m2Rider weight: 45 – 80 kgWind range: 12 – 45 knts
ENSIS INFINITY 1400For medium riders in a wide wind rangeMax. strong wind performance for heavier ridersFreeride, Freestyle, WaveUnlimited carving, playful, ultra pop
Wing sizes: 2.5 – 6.2 m2Rider weight: 50 – 100 kgWind range: 10 – 30 knts
ENSIS INFINITY 1800Max. low wind performance for light, medium ridersMax. performance for heavier ridersUnlimited carving, playful, ultra pop
Wing sizes: 2.5 – 6.9 m2Rider weight: 75 – 115 kgWind range: 8 – 20 knts
early lift, smooth control, endless glide
The ENSIS PACER is for wing foilers with high performance demands, from discoverers to advanced. As a freerider and glide addict you will love the PACER. The optimal profile and perfectly matched outline of the front wing offer an early and easy lift. The foil gently lifts you up and there you are flying, enjoying the high stability and smooth control the PACER offers you. The front and back wing are perfectly balanced and thanks to the winglets, you fly as if you were on rails. The excellent glide performance support you in gliding through your turns. The easy lift, great speed, stability and control ensures high performance in all wind conditions.
PACER 1700, 2000, 2400
ENSIS PACER 1700For light riders and advancedFreeride & FreestyleEarly lift, smooth control, agile
Wing sizes: 1.8 – 6.0 m2Rider weight: 45 – 65 kg65 – 90 kg advancedWind range: 12 – 45 knts
ENSIS PACER 2000For discoverers to advancedFreerideEarly lift, smooth control, glide and speed
Wing sizes: 2.5 – 6.9 m2Rider weight: 50 – 100 kgWind range: 6 – 35 knts
ENSIS PACER 2400For light wind and heavier ridersFreerideEarly lift, unlimited glide, easy pumping
Wing sizes: 2.5 – 6.9 m2Rider weight: 75 – 120 kgWind range: 4 – 20 knts
The medium aspect ratio ENSIS FLOW is for any athlete looking for a multipurpose high performance foil. The delta shape of the front wing allows incredible early flying and combines all relevant characteristics for use in windsurf, wing, surf and SUP foiling in a wide wind range. Thanks to the 90 cm fuselage, the foil is ultra stable while providing a great turning ability appreciated by discoverers to experts. For the expert, the foil ensures a great pop for high jumps and a safe landings. High quality, made in Europe.
FLOW 1500
Windsurf foil performanceThe ENSIS FLOW is for the foil freeride discoverer to the foil freestyle expert.Sails: 4.4 – 6.2 m2Wind range: 5 – 25 kntsRecommended boards:ENSIS TWIST 95, 125, 145
Wing, surf, SUP foil performanceThe ENSIS FLOW is optimal for any of these 3 sports. The 90 cm fuselage provides an early and smooth lift.Wings sizes: 2.5 – 5.2 m2Wind range: 5 – 25 kntsRecommended boards:ENSIS TWIST 95, 125, 145ENSIS ROCK’N’ROLL 57, 77, 97, 127
GLIDE SURF creates a playground for building new surfing sensations. With a stable and fast take off no matter the surf conditions, the GLIDE SURF delivers superior gliding and controlled speed to ride waves as far as they can flow. On the wave, the Glide Surf allows you to fly through the sections and progress from straight riding to progressive foil-turns. Your imagination is now the only limitation to how you will use the waves and how far you will fly.
Pump from one wave to the next - see how long you can fly!
GLIDE SERIES
GLIDE SURF creates a playground for building new surfing sensations. With a stable and fast take off no matter the surf conditions, the GLIDE SURF delivers superior gliding and controlled speed to ride waves as far as they can flow. On the wave, the Glide Surf allows you to fly through the sections and progress from straight riding to progressive foil-turns. Your imagination is now the only limitation to how you will use the waves and how far you will fly.