703 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T8
KITE FOIL
WING FOIL
SURF FOIL
Connection SystemKraken Modular System
DisciplinesKite - Surf - Wing
Front Wing Connection TypeT8
703 mm aluminum fuselage, with T8 front wing connection type (big chord and M8 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
The MA1200 Front Wing is your go-to wing for when the breeze is up or for bigger waves. Balanced feel and powered-up performance, with exceptional maneuverability. Suitable for Kite, Wing, Surf and Tow Foiling.
Features
Higher speed top end performance
Extremely fast and responsive turning radius
Incredibly efficient
Insane glide and pumpability
Materials
Carbon Pre-preg
The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear stabilisers to maximise this newfound speed advantage. With minimal span changes (just 7mm between them) and drastic chord reduction down to 55, 50, 45, 40 and 35mm, we found positive gains in speed, control, balance and feel. The Skinnies have inherited many of the same characterises that make our Progressive range so popular, like the precise feel and seamless turn initiation plus recovery. They are very low drag and free up speed and turning. Heavier riders and those less experienced will gravitate to the 55, 50 and 45 chord models, those who are lighter and or have greater experience might opt to reduce drag in the extreme and try the 40 or 35mm chord options.The Skinny rear wings inspire confidence by providing a more comfortable ride at speed, they reduce the normal buildup of front foot pressure that can be associated with high-speed foiling. They are a perfect match to ARTPRO foils, but keep in mind, your HPS, ART, PNG and even BSC, will equally benefit from the Skinny high-performance DNA.
Hybrid Foil
Wingfoiling – Set
The Hybrid Foil with Double US Plate adapter offers all-round performance and the freedom to customize the foil according to your individual requirements. A smooth and extremely early take-off, control in the air and a lot of performance potential provide both novices and advanced foil riders with the right setup for their flight. You can choose between an 85cm and 72cm CNC milled aluminium fuselage for either increased ease of use or higher performance and agility. Depending on your setup the Hybrid Wing Foil Set allows you to cruise in almost non-existent winds, but also to race in extremely high-wind conditions. The 85cm aluminium mast with incredible lightness and rigidity makes the Hybrid Foil a cost-efficient foil set with enormous performance potential.
ADAPTABLE MODULAR DESIGN
Each Foil Set from the GA Foils collection can be adjusted to your demands thanks to the wide range of interchangeable spare parts. This allows you to tune your basic set for different conditions, riding styles and skill levels without having to replace the complete foil. Just change the front wing, fuselage, mast or box adapter according to your requirements and enjoy the new characteristics of your foil.
CHANGEBALE FRONT WINGS
A wide range of different front wings provides riders of different skill levels and weights with exactly the right setup for various conditions. The FREE front wings in 2500cm², 2000cm², 1500cm², 1200cm² and 900cm² impress with a fine mixture of comfort, performance and lift, while the HP front wings in 1750cm², 1450cm², 1150cm² and 1050cm² aim at highest performance and speed with their higher aspect ratio.
All FREE and HP front wings are compatible both with the Hybrid and the Mach 1 Foil Set.
HYBRID ALUMINIUM ADAPTER
Three different adapters for Powerbox, Double US Plate or Deep Tuttle fin boxes are compatible with the Hybrid aluminium mast, which allows you to use the foil in different boards and foiling disciplines.
HYBRID ALUMINIUM MAST
The 85cm aluminium mast of the basic Hybrid setup can be exchanged with a 65cm, a 75cm or a 95cm version, depending on your preferences and the spot you are foiling at. All Hybrid masts provide a great mix of stiffness, lightness, strength and cost-efficiency.
ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Hybrid provides a solid connection to the compatible aluminium masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can adapt the Hybrid Foil to foiling with a windsurfing sail easily.
FUSION H-SERIES KITS
HIGH ASPECT
SIZES: H550 / H700 / H850 / H1050 / H1300
Just when you thought a product couldn’t get better, the new H-Series MkII pushes into the future of foil design and sets a new benchmark for efficiency and performance. The design team have implemented new technology learnt from the collaboration with Sintef. Water testing in the biggest tank in Europe has refined the H-series tip shape to allow the tips to breach and re-enter without cavitation. This allows more progressive riding and radical turns, be it with a kite, wing or prone. The new leaner profile now boasts an increased speed range which helps entry into freestyle tricks or on the race field. It seamlessly pairs with any of Cabrinha’s V-series stabs and is part of the modular Cab Fusion system.
The Fusion H-Series Kits come with everything you need, you just need to add your mast of choice. (Masts sold separately)
INCLUDED IN KIT
Wing & Stabilizer
Fusion Fuselage Alloy Medium
Track Nut Train X2
Screw Set Foam Core Boards
Wing Features:
Ultra Efficient Design
Ultra Lean Profile
Refined Tip Shape.
Tapered Fit
Increased Torsional Stiffness
High Aspect Ratio
Barrel Nut Secure Connection
Pre Preg Carbon Construction
Modular Design to work with Cab Fusion Products
Tech Specs
H550- 550cm², WS 690, AR 9.52, Chord 110mm
H700- 700cm², WS 815, AR 9.49, Chord 120mm
H850- 850cm², WS 900, AR 9.53 Chord 130mm
H1050- 1050cm², WS 1000, AR 9.52, Chord 140mm
H1300 - 1300cm ², WS 1090, AR 9.14, Chord 150mm
H800- 800cm ², WS 900mm, AR 9.9, Chord 125mm
H1000- 1000cm ², WS 900mm, AR 8.1, Chord 155mm
Wing Guide:
FUSION ALLOY TOP PLATE MKII
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast.
Features:
Precision CNC machined aircraft grade, anodized 6061-T6 aluminium
Incredible torsional stiffness
The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly. At the back, the cradle for the stabilizer is designed with the right angle to make the front wing fly with ease and efficiency.
The FUSELAGE CARBON is built in pre-preg carbon with a foam core to keep the weight extremely light. Some solidly anchored brass inserts are used for all fastenings.
Best maneuverability
Better responsiveness
Ultra-light carbon construction
Weight: 0.18Lenght: 33 cm
Our carbon fuselages are available in different sizes. A longer fuselage will bring more stability, while a shorter fuselage will help with sharp and quick turns.
FUSION CARBON HOLLOW MAST
HIGH PERFORMANCE - LIGHT WEIGHT
SIZES: 74 / 84 / 94 CM
The all-new Hollow Mast system is yet another example of the state of the art foil program from Cab Design Works. It nods to the critical & complete design approach of the team to view every foil component individually with a view to improve stiffness across the entire platform. It implements a bladder molded construction with strategic layering of carbon as far to the outside as possible. This culminates in our stiffest ever mast to front wing connection. This reduction in flex eliminates any lag in the turn and transfers energy while pumping seamlessly through to the front wing.
Features:
Optimized airfoil for low drag to stiffness ratio
TE scallop for improved turning and efficiency
Integrated high modulus mounting plate
Bladder molded, hollow mast construction for superior skin compression, providing ultimate rigidity
Premium high modulus prepreg carbon fiber construction
Barrel Nut compatible(x-series MkII and H-series MKII)
Tapered Fit
Mast Guide:
GRAVITY CARBON 2200
FLY IN FULL CONTROL
The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential.
Smooth take-off
Stability and lift
Area: 1760 cm²Span: 90 cmAspect Ratio: 4.6Weight: 1.95 kg (wing only)
AERO 1500SIZES: 1500
Good things come to those who wait! Our next generation of Aero Surf Foils will blow your mind! The new wings are highly efficient, keep flying as long as you want and offer incredibly fluid and forgiving turning!Our new range of Aero Surf Foils comes with multiple size front and back wings as well as two fuselage options for different conditions and rider weights. Completely revamped Carbon front wings in 1500, 2000 and 2500cm can be combined with 365 and 295 cm Carbon back wings and two different length fuselages. Our newly designed 75cm Alu mast with special profile and wider chord length offers rigidity and response you’d only expect from carbon.Various combinations are possible, these four key combos are offered as packages:Aero Foil 1500 (Prone Surf and Advanced SUP): 1500 front wing / 295 back wing / 64cm fuselage. Our fastest and most manoeuvrable setup is good for riders between 70-95kg once the surf is head high and above. For riders below 70kg it’s a good all-round setup
HOVER GLIDE FSURF V.3
Das Hover Glide FSurf V.3 revolutioniert das Segment der einsteigerfreundlichen und zugleich extrem auftriebsstarken Foils für Surf-Foiler. Mit seiner einzigartigen Wendigkeit und der für diese Flügelgröße ziemlich außergewöhnlichen Fahrgeschwindigkeit bedient es die Wünsche von Einsteigern, Aufsteigern und Fortgeschrittenen gleichermaßen.
CHARAKTERISTIK
Das Hover Glide FSurf V.3 ist mit dem Infinity 76-Frontflügel ausgestattet und wird damit zu einem der vielseitigsten Foil-Setups in unserem gesamten Angebot. Die enorme Fläche und das großzügig gewählte Profil des Frontflügels verleihen dem Foil einen bahnbrechenden Auftrieb und ein Höchstmaß an Fahrstabilität, womit die ersten Fahrversuche, aber auch das Erlernen des Richtungswechsels im Flugzustand, sowie neuer Tricks bestens unterstützt werden. Die Outline und die gewölbten Schwingen des Infinity 76 sorgen zudem für eine so ausgeprägte Agilität und Wendigkeit, dass Fahrspaß in jeder Situation zum festen Produktversprechen gehört.
TECH SPECS
Mast (cm)
71
Fuselage (cm)
61
Front Wing (cm²)
1534
Rear Wing (cm)
42
Gewicht (kg)
4,98
Hybrid Foil
Wingfoiling – Set
The Hybrid Foil with Double US Plate adapter offers all-round performance and the freedom to customize the foil according to your individual requirements. A smooth and extremely early take-off, control in the air and a lot of performance potential provide both novices and advanced foil riders with the right setup for their flight. You can choose between an 85cm and 72cm CNC milled aluminium fuselage for either increased ease of use or higher performance and agility. Depending on your setup the Hybrid Wing Foil Set allows you to cruise in almost non-existent winds, but also to race in extremely high-wind conditions. The 85cm aluminium mast with incredible lightness and rigidity makes the Hybrid Foil a cost-efficient foil set with enormous performance potential.
ADAPTABLE MODULAR DESIGN
Each Foil Set from the GA Foils collection can be adjusted to your demands thanks to the wide range of interchangeable spare parts. This allows you to tune your basic set for different conditions, riding styles and skill levels without having to replace the complete foil. Just change the front wing, fuselage, mast or box adapter according to your requirements and enjoy the new characteristics of your foil.
CHANGEBALE FRONT WINGS
A wide range of different front wings provides riders of different skill levels and weights with exactly the right setup for various conditions. The FREE front wings in 2500cm², 2000cm², 1500cm², 1200cm² and 900cm² impress with a fine mixture of comfort, performance and lift, while the HP front wings in 1750cm², 1450cm², 1150cm² and 1050cm² aim at highest performance and speed with their higher aspect ratio.
All FREE and HP front wings are compatible both with the Hybrid and the Mach 1 Foil Set.
HYBRID ALUMINIUM ADAPTER
Three different adapters for Powerbox, Double US Plate or Deep Tuttle fin boxes are compatible with the Hybrid aluminium mast, which allows you to use the foil in different boards and foiling disciplines.
HYBRID ALUMINIUM MAST
The 85cm aluminium mast of the basic Hybrid setup can be exchanged with a 65cm, a 75cm or a 95cm version, depending on your preferences and the spot you are foiling at. All Hybrid masts provide a great mix of stiffness, lightness, strength and cost-efficiency.
ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Hybrid provides a solid connection to the compatible aluminium masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can adapt the Hybrid Foil to foiling with a windsurfing sail easily.
1750
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible!
Recommended for novice riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil.
Recommended for novice heavy weight riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
FUSION FQR
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Patent pending Cabrinha Foil Quick Release is an innovative new tool-less mast plate that allows you to detach your foil mast from the board in seconds. The tapered engagement provides a press fit that will ensure a solid connection without any movement. Gone are the days of trying to tetris pack your foil boards to and from the beach, simply pull the release lever and the mast detaches. The FQR release attaches to all industry standard 9cm foil board track.
Features:
Cam lever - Tool less operation
Aircraft grade extruded, anodized 6061-T6 aluminium components
Lightning fast attachment
Universal 9cm mounting
Safety key engagement
tapered engagement
Anti-line snag geometry - increased safety when kiting
Precision calibration design
SPIRIT SURF 1500 / 75
SURF / FREERIDE / STRAPLESS
If you're looking for an incredibly versatile foil for the waves, this is it, prone surf foil, wing foil and kite foil this one rules them all.
KEY FEATURES
DUOTONE SPIRIT SURF
EXCELLENT LIFT AND POWER
THE BEST LIFT OF THE RANGE WITH PLENTY OF POWER.
INCREDIBLE WHITE WATER STABILITY
EVEN IN WHITE WATER THE SURF 1500 STAYS STABLE AND GUARANTEEING ENDLESS FLIGHTS.
PRONE SURF AND WING FOILING CAPABLE
MOST VERSATILE SURF WING, COMPATIBLE FOR KITE-SURFING, SURFING AND WING FOILING.
UNRIVALLED LOW-END RANGE
HUGE LOW-END WHICH GETS YOU UP IN NO SWELL AND NO WIND.
CARBON FRONT AND BACK WING
ULTRALIGHT CARBON WINGS FOR THE BEST PERFORMANCE.
FUSION FIT SYSTEM
THE INNOVATIVE FUSION FIT SYSTEM FOR A BOMB PROOF AND STIFF CONNECTION.
DETAILS
DUOTONE SPIRIT SURF
The Spirit Surf 1500 is the combination of years of design and experience in the water. The huge wing makes foiling easy, you can ride with a smaller kite, or just get foiling before everyone else. Massive amounts of lift are produced by the profile, and the stall speed is so low you'll think it's floating. The Spirit Surf is forgiving and allows you to learn the basics quickly; it's also great fun to ride in the waves, keeping the top speed down so you can harness the power of the wave rather than use the kite. The connection of the aluminium mast ensures the best connection for the mast into the top plate and fuselage. The connection is important for the transmission from your feet to the foil, giving you total control. A new 250 sqcm back wing delivers an incredible surf feeling. The whole system is modular, and you can run different mast and wing configurations for various conditions. The wing is big enough that an experienced surf foiler will be able to prone paddle into some waves and it will also work as a wing foil set up with the right board. This makes it an incredibly versatile piece of equipment that will spend far more time in the water than in the garage! If you want a wing with more lift and stability than you could imagine then the Spirit Surf 1500 is it!
AERO 2500SIZES: 2500
Good things come to those who wait! Our next generation of Aero Surf Foils will blow your mind! The new wings are highly efficient, keep flying as long as you want and offer incredibly fluid and forgiving turning!Our new range of Aero Surf Foils comes with multiple size front and back wings as well as two fuselage options for different conditions and rider weights. Completely revamped Carbon front wings in 1500, 2000 and 2500cm can be combined with 365 and 295 cm Carbon back wings and two different length fuselages. Our newly designed 75cm Alu mast with special profile and wider chord length offers rigidity and response you’d only expect from carbon.Aero Foil 2500 (Big Boy SUP): 2500 carbon front wing / 365 back wing / 80cm fuselage. Ideal for riders above 90kg and up to head high surf as well as SUP Downwinders
The mast length of 75cm is ideal for SUP-, SURF, Wake and Wingfoiling. The Indiana mast profile ensures amazing flexional and torsional stiffness. The aluminum masts transmit the control impulses very quickly and directly from the board to the foil.
For one complete Foil you need to follow this 7 steps:Step 1: Choose one of four FrontwingsStep 2: Choose one of two StabilizersStep 3: Choose one of two FuselagesStep 4: Take the Set of Angle AdaptorsStep 5: Choose one of three Mast lengthsStep 6: If you have a board with two US finboxes/tracks you choose the Baseplate. If you have a Deep Tuttle/Tuttle Box you choose the Deep Tuttle/Tuttle Adaptor Head AND the Tuttle Adaptor PlateStep 7: Take the Set of Mast / Fuselage Screw
The MA1350 Front Wing is a mid-aspect ratio wing ideal for all rider weights. Easily generates lift without pumping. This performance wing is fast turning, with early planing ability for lighter wind conditions or heavier riders. Suitable for Kite, Wing, Surf and Tow Foiling.
Features
Higher speed top end performance
Extremely fast and responsive turning radius
Incredibly efficient
Insane glide and pumpability
Materials
Carbon Pre-preg
Red Advance Fuselage (+40)
If you're into pushing the envelope in Prone, SUP, Wake, Wing or Pump, these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected feeling on the larger PNG and BSC front wings? Our new Red Advance fuselage is for you.In three different sizes you get tons of options to fine tune your setup. This design sees the mast position moved 40mm closer to the front foil, opening up entirely new options for performance.The regular Red fuselages are perfectly suited to the majority of riders across all disciplines. By no means are these new Red Advance fuselage intended to replace them. They just provide options for performance and a more connected feel when pushing the limits.
As the mast position on the Red Advance Fuselage is moved closer to the front wing, the effective length of the fuselage behind the mast is now slightly increased (by 40mm).
When choosing your Red Advance Fuselage, it’s advisable to possibly opt for a length shorter than you are currently using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead.
The Red Advance fuselage is available in Short, Ultrashort and Crazyshort sizing. Compatible with all the front wings that use the red fuselage. Compared to the regular Red fuselage range, these 3 new little siblings provide a looser, smoother transition from side-to-side. The sensation our testers liken it to is similar to the sensation of moving fins forward in the tracks on a surfboard. Initiating turns becomes easier, which is great in the surf.
In an effort to reduce the use of cardboard and excess packing material, all the Black and Red ADVANCE fuselages are shipping with the matching new fuselage protective covers. Better for your gear. Better for the environment.
Infos & Characteristics
Foil box features several compartments and protection flaps to protect a disassembled foil. Mast, front wing, stabilizer, screws & tools all have a specific room.
There’s even a compartment for a helmet.
SIZES
1100X310X200MM - 1.45KG
SPIRIT FREERIDE 700 / 90
Easy accessible allround foil and the ideal tool to quickly improve your hydro foiling skills.
KEY FEATURES
DUOTONE SPIRIT FREERIDE
EASY ACCESSIBLE ALLROUND FOIL
THE SPIRIT FREERIDE IS AN EASY ACCESSIBLE ALL-AROUND FOIL AND THE IDEAL TOOL TO QUICKLY IMPROVE YOUR HYDRO FOILING SKILLS.
TRACKING AND DIRECTIONAL CONTROL
GOOD PREDICTABLE TRACKING AND DIRECTIONAL CONTROL IN ANY SITUATION.
NEW ALUMINIUM FUSELAGE WITH POCKET FOR MAST CONNECTION
A UNIQUE NEW ALUMINIUM FUSELAGE WITH POCKET FOR THE MAST CONNECTION GUARANTEES MAXIMUM STIFFNESS AND THE BEST AND MOST DIRECT TRANSMISSION OF STEERING IMPULSES.
NEW MAST PROFILE WITH LONGER CHORD
THE NEW MAST PROFILE WITH A LONGER CHORD LENGTH ELIMINATES VENTILATION AT HIGH SPEED.
CARBON COMPOUND FRONT AND BACK WING
UNIQUE AND INCREDIBLY DURABLE CARBON COMPOUND FRONT AND BACK WING.
FORMULA 1 FUSION TECHNOLOGY
FORMULA 1 FUSION TECHNOLOGY IS USED FOR THE CONNECTION OF THE MAST TO THE PLATE - MADE IN GERMANY!
DETAILS
DUOTONE SPIRIT FREERIDE
The goal with the Spirit Freeride foil is to find the perfect allround, multi-purpose hydrofoil setup. It’s a single-stroke wing in the sense that you will normally be flying after just a single power stroke from your kite and already maintains flight at lower speed. The Spirit back wing is big enough to give good pitch control at low speeds, but not too big to hold you back at the top end. Winglets offer good tracking and directional control. There ́s no better choice to start your foil freeride career than using the spirit freeride set up at an unbeatable price point.
653 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T6
KITE FOIL
WING FOIL
SURF FOIL
Connection SystemKraken Modular System
DisciplinesKite - Surf - Wing
Front Wing Connection TypeT6
653 mm aluminum fuselage, with T6 front wing connection type (small chord and M6 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
The Sonar High Aspect Front Wing Series is engineered for the highest speed and efficiency possible across a range of disciplines – from kite foiling to prone foil surfing. With this style of wing, you need minimal pump and power to generate glide. The shorter chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability and a slightly longer radius turn than a lower aspect ratio wing of the same size. The wingtips are refined to ensure there is no ventilation when you tip breach, giving you the ability to crank tighter radius turns at higher speeds, without losing speed. With excellent lift at high speed, the HA850-HA1250 are your core wing-foiling and prone surf sizes.
The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear stabilisers to maximise this newfound speed advantage. With minimal span changes (just 7mm between them) and drastic chord reduction down to 55, 50, 45, 40 and 35mm, we found positive gains in speed, control, balance and feel. The Skinnies have inherited many of the same characterises that make our Progressive range so popular, like the precise feel and seamless turn initiation plus recovery. They are very low drag and free up speed and turning. Heavier riders and those less experienced will gravitate to the 55, 50 and 45 chord models, those who are lighter and or have greater experience might opt to reduce drag in the extreme and try the 40 or 35mm chord options.The Skinny rear wings inspire confidence by providing a more comfortable ride at speed, they reduce the normal buildup of front foot pressure that can be associated with high-speed foiling. They are a perfect match to ARTPRO foils, but keep in mind, your HPS, ART, PNG and even BSC, will equally benefit from the Skinny high-performance DNA.
€279.00*
This website uses cookies to ensure the best experience possible. More information...