F-ONE HM Carbon Mast 14 2023
1 289,00 €*
Expédition immédiate, livraison d'env. 2 à 5 jours ouvrables
Informations sur le produit "F-ONE HM Carbon Mast 14 2023"
A true masterpiece of composite craftmanship and design, the F-ONE HM CARBON MAST 14 will transform your foiling experience. Slice through the water and enjoy the purest glide with its ultra-thin profile, full Monobloc structure and High Modulus Carbon construction.
- Ultra-thin 14mm profile
- Full Monobloc construction
- High Modulus Carbon layup
- High performance
- Increased rigidity
The HM Carbon Mast 14mm thick features both a new integrated top plate and TITAN mast foot at the bottom. Associated with the profile, this full Monobloc construction brings incredible rigidity and helps reduce drag to a minimum, meaning easier starts, immense glide, higher speeds and the utmost connection between the foil and the board.
The mast is in one piece and built in carbon pre-preg, all molded and cured in one shot. Our SPINE internal structure ensures the best rigidity and control while riding. The added High Modulus Carbon (M40J) fiber layup follows F-ONE’s special recipe to optimize both the bending and torsional stiffness, allowing you to fully stay in control and comfortable in all situations and at high speeds. The layers of carbon fibers have been carefully distributed at 0° lengthwise to optimize stiffness in bending and at about 45° to optimize stiffness in torsion. Finally, this layup has been finely tuned and optimized for each mast length to offer the best performance in each sport.
With a size range going from 80cm, 85cm, 95cm to 105cm, this mast is ready for all disciplines — surf, wing, kite — and will particularly excel in downwind and where glide is your top priority. The 80cm is our newest size and was developed specifically for surf foiling, offering better pumping abilities and reducing undesirable breaching of the wingtips on the waves.
This mast can be connected to virtually all boards on the market featuring the Twin-Tracks system and can receive all the wings and fuselage that feature the TITAN connection slot.
Let it glide, further, with the F-ONE HM Carbon Mast 14, a superior piece of gear that raises the bar in terms of performance and control, delivering superior and flawless behavior on the water.
Accessory Items
The foils of the EAGLE HM CARBON line are designed to bring you thrilling speed potential, incomparable downwind sensations, and everlasting cruising time above the water. Remarkable speed and downwind performances Unrivaled time above the water Thin and optimized design for minimal drag Available in 690cm² / 790 cm² / 890 cm² / 990 cm² / 1090 cm² / 1290cm² Sets: FW EAGLE HM CARBON 690 + MONOBLOC TAIL XXXS 190 DW + TOOL TORX T30 FW EAGLE HM CARBON 790 + FUSELAGE XXXS + STAB DW 210 + TOOL TORX T30 FW EAGLE HM CARBON 890 + FUSELAGE XXS + STAB DW 210 + TOOL TORX T30 FW EAGLE HM CARBON 990 + FUSELAGE XXS + STAB DW 210 + TOOL TORX T30 FW EAGLE HM CARBON 1090 + FUSELAGE XXS + STAB DW 210 + TOOL TORX T30 FW EAGLE HM CARBON 1090 + FUSELAGE XXS + STAB DW 210 + TOOL TORX T30 The EAGLE HM CARBON is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed without the foil abruptly stalling and dropping. Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast. The EAGLE HM CARBON foils are now available in six sizes: 690 cm², 790 cm², 890 cm², 990 cm², 1090 cm² and 1290 cm². The 690cm², a new addition to the range, and the 790 cm² are perfect for a strong wing session or a long downwind. It will also fit riders of a smaller build and any experienced foiler looking to break their personal records. The 890 cm² and 990 cm² are great all-round sizes that will satisfy a wide range of advanced riders looking for exhilarating sensations and a pure downwind glide. The 1090cm² and 1290 cm², another addition, bring more accessibility to downwind. They are great choices to start in SUP downwind and for riders of a bigger stature. The 1290 will excel in light wind and flat downwinds as well. All sizes but the 690 cm² are recommended with the DW210 HM stab, just as thin as the front wing. This stabilizer will allow you to gain more speed and pumping efficiency. The 690 cm² will be at it best when paired with the XXXS 190 DW Monobloc Tail, ideal for strong conditions and very experienced riders. Thanks to its smaller surface area, the DW190 offers even more speed and better maneuverability
GRAVITY CARBON The GRAVITY CARBON foils are very easy and stable to learn on and progress with. They are designed to provide a solid lift with a progressive take-off, and are of great use for any rider in light and small conditions. Aspect Ratio: 5.0 Accessible and straightforward foil Smooth and early take-off Stability, speed control, and lift Reliable and efficient in light conditions Available in 1800 cm² / 2200 cm² Sets: FW GRAVITY CARBON 1800 + FUSELAGE CARBON LONG + STAB C275 SURF + TOOL TORX T30 FW GRAVITY CARBON 2200 + FUSELAGE CARBON LONG + STAB C275 SURF + TOOL TORX T30 A GRAVITY foil is intuitive. It generates lift at low —and even very low— speed but does it smoothly so you can easily keep your balance. These front wings are designed to be easy to roll and turn and are highly maneuverable. The GRAVITY CARBON is a great beginner foil, but also simultaneously terrific for heavier or more experienced riders looking to get out in light or unstable conditions. The range now includes two sizes: 1800 and 2200 cm². Foils with such areas support an early take-off and more lift and stability. However, we still made sure they also come with enough aspect ratio to maintain a decent speed range and to avoid unnecessary drag. Their massive span allows you to control low speeds, and these foils also turn and carve well. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport. Both GRAVITY CARBON are recommended with the C275 SURF stab. Progressive and versatile, this stab will bring stability, control, and confidence to your ride.
Fun, versatile, and designed for carving, the MIRAGE foils will transform your kite foiling experience. Great carving and freeriding abilities Rail-to-rail surf feeling Huge speed range Easier than ever Available in 800 cm²/1000 cm² Foiling has unleashed a fantastic riding potential in light wind, but it has also proven to be a fantastic support to carve some lines on flat waters or small waves alike. Imagine a foil that is stable and lifts you at low speed so you can succeed all your transitions or tricks, or a foil that glides and can accelerate so you can race your mates for a short moment before you bank on a nice wave to lay a perfect turn. This is the MIRAGE foil. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport. The MIRAGE CARBON is the better choice of the line if you’re looking for performance and is recommended with the C220 SURF stab. This stabilizer offers fantastic glide and great carving potential. Fast and agile, it will perfectly serve the MIRAGE wings with effortless turns and thrilling accelerations. Recommended Plane:
The ESCAPE HM CARBON foils are nothing short of masterpieces of hydrodynamic refinement and composite craftsmanship. Aspect Ratio: 6 Amazing glide and speed Control at high speed Unmatched rigidity Full Monobloc carbon construction Designed to foil at high speeds with full control no matter the conditions, these foils will lead to incredible performances, but their “raisons d’être” are first and foremost to provide the most exhilarating ride on the water. In light or strong winds and whether kite foiling or wing foiling, the ESCAPE HM CARBON foil is a playful, nimble, and enjoyable hydrofoil that delivers an amazing glide with a terrific speed potential and utmost control. Such a high level of performance is only possible by using a Full Monobloc construction where the entire plane (front wing, fuselage, stabilizer) is molded together in a single piece made of pre-preg carbon. This consequently reduces the hydrodynamic drag and results in a stiff and solid foil. The newly added High Modulus Carbon fiber layup leads to even more rigidity, control, and dependability that will drive you to incredible feats in each of your session. This finessed foil is incredible for kite foil riders looking for speed, but it also delivers powerful sensations while carving. The pro wing foilers will also appreciate its quality and sophistication as they push the limits of this discipline.