2021 AK Foil Surf V2 - 1300 Complete
Surf specific foil also ideal for light wind kiting.
Medium rear wing for versatile performance.
1300cm² AK Surf front wing.
The AK Surf Foil Medium was developed specifically as a crossover surf foil to perform in small to medium size waves, and as a light wind, lower speed, kite wing.
The intermediate aspect ratio front wing with updated profiles provide the perfect balance between maneuverability, speed, and pumping.
Front Wing: 1300cm2 Rear Wing: 260cm2 Mast: 70cm
SURF FOIL 1600
Surf specific foil ideal for heavy weight & light wind kiting.Large rear wing for versatile performance.1600cm² AK Surf front wing.
The AK Surf Foil Large was developed specifically as a surf foil to perform in small to medium size waves, or for heavier riders over 80kg / 200LBS, in all-around surf or for light wind kite foiling.
The intermediate aspect ratio wings with updated profiles provide the perfect balance between maneuverability, speed, and pumping.
Front Wing: 1600cm2 Rear Wing: 300cm2 Mast: 70cm
The Indiana Front Wing 620 kite was specially developed for kitefoiling. It is very light, turns quickly and flies very early. It is great for all skill levels from beginners to pros. The stabilizer options on the new fuselage enable the angle and position of the stabilizer to be adjusted. This means that the stability and flexibility of the foil can be changed according to personal preference and skill level.
Span: 62cm, Area: 1232cm2, Volume: 1350cm3, Weight: 600g • Material: 100% Carbon, PET Foam, Epoxy • Production Technique: Steel Mold • Produced in China Includes Wing SleeveConsists of:
- Indiana Foil Front Wing 620 K- Indiana Foil Stabilizer 420- Indiana Foil Alu Mast 90cm (with Sleeve)- Indiana Foil Baseplate Alu (incl. Zinc Anode & Screws)- Indiana Foil Set of Mast / Fuselage Screws- Indiana Foil Set of Stab Angle Adaptors- Indiana Foil Surf Fuselage (incl. Cartridge)
AERO 2000 SHORT FUSELAGESIZES: 2000
Les bonnes choses arrivent à point à ceux qui savent attendre ! Notre nouvelle génération de foils Aero Surf est époustouflante ! Hautement efficaces, particulièrement fluides et tolérantes dans les virages, les nouvelles ailes vous permettront de voler aussi longtemps que vous le souhaitez.Notre nouvelle gamme de foils Aero Surf est disponible en deux options de fuselage et différentes options de choix de tailles d’ailes avant et arrière, en fonction des conditions et du poids du pratiquant. Complètement repensées, les ailes avant en carbone de 1500, 2000 et 2500 cm peuvent être associées aux ailes arrière de 365 et 295cm et utilisées avec deux différentes longueurs de fuselage. Notre nouveau mât aluminium de 75 cm au profil spécifique et à la longueur de corde plus importante, est aussi rigide et réactif qu’un modèle en carbone.Aero Foil 2000 fuselage court (Surf et SUP polyvalent) : Notre nouveau foil polyvalent associe une aile avant 2000 / une aile arrière 365 / un fuselage de 64 cm. Une énorme portance, une bonne maniabilité et une forte réactivité au pompage, couvriront les besoins de la plupart des riders entre 70 et 90 kg dans les vagues petites à moyennes. Ce modèle convient également au SUP foil « downwind » pour les riders légers à intermédiaires.
The aluminum masts feature a 13.3 cm wide and stable chord for stability at all speeds. Double fastened and bonded end caps provide a secure connection to your board and fuselage. *Available in direct connect, abracadabra, and deep tuttle.
THE CARVING FREERIDE CF 800 FOIL KIT DELIVERS THE PERFECT COMBINATION OF STABILITY AND RAIL TO RAIL CARVE-ABILITY. THIS SETUP WITH THE M85 MAST IS IDEAL FREERIDE KITING OR BIGGER WAVE SURFING.
Kite: Ideal freeride foiling.Surf: Lighter rider or bigger wave riding.SUP: Lighter rider or bigger wave riding.Wake and Tow: Ideal for experienced tow foiling.Wing Foil: All riders in strong winds.We recommend the setup below, much depends on rider weight, ability and chosen foil sports.
Wing: CF800Mast: M85cm/33.5”Fuselage: TC60Tail Wing: CF300
Weight: 2800g
*Kit comes complete with - Carry case, Polycarbonate Pro Shims, Bi Directional Titanium Washers, Titanium T-nuts, Screws, Torx tool, Protective mast and wing covers.
THE HS 1550 FOIL KIT IS A GREAT COMBINATION FOR ALL ROUND ACCESSIBLE PERFORMANCE.
Its stable, smooth and has good glide to link sections or pump. Well suited for Wing foil riders that want a setup that can handle light and stronger winds!
Surf: Ideal for ripping up waves.SUP: Ideal for ripping up waves.Kite: light wind performance free ride.Wake: Versatile wake foiling heavier riders.Windsurf: All riders in moderate winds.Wing Foil: Heavier riders in moderate winds.Downwind: Experienced or lighter riders.We recommend the setup below, much depends on rider weight, ability and chosen foil sports.
Wing: HS1550 Mast: M72cm/28.5”Fuselage: TC60Tail Wing: HS232Weight: 3109g
*Kit comes complete with - Carry case, Polycarbonate Pro Shims, Bi Directional Titanium Washers, Titanium T-nuts, Screws, Torx tool, Protective mast and wing covers.
The High Performance Speed (HPS) wings are FAST. Designed for the ultimate in performance, but yet still usable by most levels of riders. Since the HPS wings use their own foil section with less camber and narrower chord, we developed a special fuselage that will accommodate all the HPS and future performance front wings.
The HPS wings are the ideal performance wings for WINGING and DOWNWIND. High level riders they also SUP, PRONE, WAKE and WINDSURF foil the bigger sizes, while the smaller sizes are perfect for TOW, freestyle WINGING and KITE foiling.
This is a new generation of front wings made for FAST performance riding, while it's still stable and predictable with enormous amount of glide and great turning.
PLEASE NOTE:
THIS WING IS ONLY COMPATIBLE WITH THE BLACK FUSELAGES
AXIS HPS 880 Carbon Wing
Technical Data:
WINGSPAN: 880 mm / 34.65 inches
MAX CHORD: 150mm
MEAN AVERAGE CHORD: 123mm
ASPECT RATIO: 7.17
ACTUAL AREA 1112 square cm
CAMBER (as % of CHORD): 2.5
VOLUME: 1088 cubic cm / 66.42 cubic inches
Recommended use:
WING Surfing for intermediate and advanced levels. Medium + wind conditions. Great jumper. Most of our freestyle riders are on the HPS 880 wing. It rides waves beautifully.
SUP / Surf - You need skill and power to ride the 880 on the surf - but it's explosive
Wake foiling - It's a smaller wing, so it takes skill to wake on it
Pump Foiling - It's a small wing, but holds its own
Kite foiling - early and super easy lift - This wing is fast
Towin Foiling - fun for head high or smaller waves
Here is what the experts say:
HPS are fast and perfect for wingding and downwinding. But good riders are surfing, SUP, downwinding, wake even dock starting them. Even kiting the smaller HPS is a blast.
The AXIS HPS wings get their lift from speed - the take off is dramatic. Catches you by surprise the first time you take off. This high aspect ratio and the lower camber foil section, makes them performance oriented, but still comfortable for the intermediate levels.
Suggested Rear Wing:
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
400 HA Carbon is made for the HPS 880. Amazing feeling super loose and fast. The 400 HA rear wing has low drag, and it's high aspect.
390mm Carbon for Wing and Surf with good turning control and additional glide
380mm Carbon gives the HPS 880 even more speed, with low drag, and feel on rails when you turn. A great combo.
370mm Carbon for loose feel and fast turning.
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
The 650 HPS hydrofoil carbon front wing is the smallest wing of the HPS family. Designed for high winds with a handwing, towing big and fast waves, kite foiling in all conditions, and lightweight riders looking for high performance on an easy to ride setup.The High Performance Speed (HPS) family of wings are FAST and glide like no other. Designed for the ultimate in performance, but yet easy to ride by most levels of riders. Since the HPS wings use their own foil section with less camber and narrower chord, we developed the black fuselage that will accommodate all the HPS and future performance front wings.
The HPS wings are the ideal performance wings for WINGING (all sizes), DOWNWIND (larger sizes) and TOWING (smaller sizes). High level riders they also SUP, PRONE, WAKE, WINDSURF and KITE foil the bigger sizes, while the smaller sizes are perfect for TOW, freestyle WINGING and KITE foiling.
This is a new generation of front wings made for endless gliding and faster speeds performance riding, while they are still stable and predictable with enormous amount of glide and great turning.
The HPS wings are compatible with all the sizes of the Black fuselages.
AXIS HPS 650 Carbon Wing
Technical Data:
WINGSPAN: 650 mm / 25.5 inches
MAX CHORD: 140mm
MEAN AVERAGE CHORD: 123mm
ASPECT RATIO: 5.68
ACTUAL AREA 744 square cm
CAMBER (as % of CHORD): 2.5
VOLUME: 716 cubic cm / 43.75 cubic inches
Recommended use:
Winging for intermediate and advanced levels. High wind conditions. Speed wing. Also for lightweight riders looking for the performance setup.The HPS 650 is designed for speed and high winds. It turns on a dime, is very stable when dropping on proper waves with the wing, and feels intuitive and easy while performing at the highest levels of speed.
Kite foiling - early and super easy lift - This wing is fast and tons of fun to kite with
Towing - Ideal for bigger and faster waves
Here is what the experts say:
HPS are fast and perfect for wingding and downwinding. But good riders are surfing, SUP, downwinding, wake even dock starting them. Even kiting the smaller HPS is a blast.
The AXIS HPS wings get their lift from speed - the take off is dramatic. Catches you by surprise the first time you take off. This high aspect ratio and the lower camber foil section, makes them performance oriented, but still comfortable for the intermediate levels.
It's not worth winging unless you use the HPS front wings.
Suggested Rear Wing:
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
400 HA Carbon is made for the smaller HPS wings. Amazing feeling super loose and fast. The 400 HA rear wing has low drag, and it's high aspect.
380mm Carbon gives the HPS 6500 even more speed, with low drag, and feel on rails when you turn. The HPS 650 and the 380 rear wing is a great combo.
370mm Carbon for loose feel and fast turning.
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
The Broad Spectrum Carve (BSC) wings are a new direction into easy to ride wings, with good amount of performance embedded to the design. Perfect for all round riding including entry level riders. The larger sizes are ideal for PUMPING, SUP, WINGING, WAKE. As we go down on sizing, 890-810-740 are high performance PRONE, WINGING and KITE wings. For the BSC wings we use a refined foil section, with extensive speed range, and stability. This makes the BSC wings ideal for all levels of riders and conditions. The 890 / 810 / 740 sizes are designed for performance PRONE, WINGING and KITE foiling. These wings are stable, fast and turn on a dime. The 1120 and 1060 are the easiest wings for all levels, heavier riders and all rounders for WING, SUP, WAKE and PUMP. Very early lift, butter smooth riding, good speed range, and great turning for their size. The 970 could be the all levels wing for all styles and levels of riding. The 890-810-740 are faster, more technical wings, designed for the skilled SUP, PRONE, WINGING riders who are looking for higher performance in a very easy to ride package.
As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil.
PLEASE NOTE:
THIS WING IS ONLY COMPATIBLE WITH THE BLACK FUSELAGES
AXIS BSC 890 Carbon Wing
Technical Data:WINGSPAN: 890 mm / 35inchesMAX CHORD: 170mm / 6.7inchesASPECT RATIO: 6.43ACTUAL AREA 1290 square cm / 200 square inchesPROJECTED AREA: 1232 square cm / 191 square inchesVOLUME: 1697 cubic cm / 104 cubic inches
Recommended use:WING Surfing for all levels and medium + conditions. Super stable for the sizeDownwinding - Medium+ conditions and intermediate+ levelSUP / Surf - Medium+ conditions and intermediate levelWake foiling - Intermediate+ levelPump foiling - Intermediate+ levelWindsurf foiling - Intermediate+ levelKite foiling - Ideal for all styles, levels and conditions
Here is what the experts say:The BSC wings are incredibly easy wings to ride. Bigger sizes ideal for lighter days and bigger dudes. Smaller sizes more surfy and faster. Medium AR makes them a bit slower but still faster than last years all rounds.
Rear Wing Options:
500mm Carbon for max control, stability and slower ride (entry levels)
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
440mm Carbon for control and stability (all levels)
400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate)
390mm Carbon for Wing and Surf with good turning control and additional glide
370mm Carbon for loose feel and fast turning, with less stability (intermediate). The rear wing that does it all
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
The Broad Spectrum Carve (BSC) wings are a new direction into easy to ride wings, with good amount of performance embedded to the design. Perfect for all round riding including entry level riders.
The larger sizes are ideal for PUMPING, SUP, WINGING, WAKE. As we go down on sizing, 890-810-740 are high performance PRONE, WINGING and KITE wings.
For the BSC wings we use a refined foil section, with extensive speed range, and stability. This makes the BSC wings ideal for all levels of riders and conditions. The 890 / 810 / 740 sizes are designed for performance PRONE, WINGING and KITE foiling. These wings are stable, fast and turn on a dime.
The 1120 and 1060 are the easiest wings for all levels, heavier riders and all rounders for WING, SUP, WAKE and PUMP. Very early lift, butter smooth riding, good speed range, and great turning for their size. The 970 could be the all levels wing for all styles and levels of riding. The 890-810-740 are faster, more technical wings, designed for the skilled SUP, PRONE, WINGING riders who are looking for higher performance in a very easy to ride package.
As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil.
PLEASE NOTE:
THIS WING IS ONLY COMPATIBLE WITH THE BLACK FUSELAGES
AXIS BSC 810 Carbon Wing
Technical Data:
WINGSPAN: 810 mm / 32 inches
MAX CHORD: 155mm / 6/1inches
ASPECT RATIO: 6.42
ACTUAL AREA 1070 square cm / 166 square inches
PROJECTED AREA: 1022 square cm / 158 square inches
VOLUME: 1284 cubic cm / 78 cubic inches
Recommended use:
WING Surfing for all levels and medium + conditions. Super stable for the size
Downwinding - Medium+ conditions and intermediate+ level
SUP / Surf - Medium+ conditions and intermediate level
Wake foiling - Intermediate+ level
Pump foiling - Intermediate+ level
Windsurf foiling - Intermediate+ level
Kite foiling - Ideal for all styles, levels and conditions
Here is what the experts say:
The BSC wings are incredibly easy to ride. Bigger sizes ideal for lighter days and bigger dudes. Smaller sizes more surfy and faster. Medium AR makes them a bit slower but still faster than last years all rounds.
Rear Wing Options:
500mm Carbon for max control, stability and slower ride (entry levels)
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
440mm Carbon for control and stability (all levels)
400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate)
390mm Carbon for Wing and Surf with good turning control and additional glide
370mm Carbon for loose feel and fast turning, with less stability (intermediate). The rear wing that does it all
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
The Broad Spectrum Carve (BSC) wings are a new direction into easy to ride wings, with good amount of performance embedded to the design. Perfect for all round riding including entry level riders. The larger sizes are ideal for PUMPING, SUP, WINGING, WAKE. As we go down on sizing, 890-810-740 are high performance PRONE, SUP, WINGING and KITE wings. For the BSC boards we use a refined foil section, with broad speed range, and stability. This makes the BSC wings ideal for all levels of riders and conditions. The 890 / 810 / 740 sizes are designed for performance PRONE, SUP, WINGING and KITE foiling. These wings are stable, fast and turn on a dime. The 1120 and 1060 are the easiest wings for beginners and all rounders for WING, SUP, and WAKE, very early lift, butter smooth riding, good speed range, and great turning for their size. The 970 could be the all levels wing for all styles and levels of riding. The 890-810-740 are faster, more technical wings, designed for the skilled SUP, PRONE, WINGING riders who are looking for higher surf performance in a very easy to ride package.
THIS WING IS ONLY COMPATIBLE WITH THE BLACK FUSELAGES
AXIS BSC 740 Carbon Wing
Technical Data:
WINGSPAN: 740 mm / 29.13 inches
MAX CHORD: 140mm
ASPECT RATIO: 6.49
ACTUAL AREA 883 square cm / 136.9 square inches
PROJECTED AREA: 844 square cm / 130.8 square inches
VOLUME: 757 cubic cm / 46 cubic inches
Recommended use:
High Speed, High Performance riding. Bigger waves prone, tow, and all round kiting.
Rear Wing Options:
500mm Carbon for max control, stability and slower ride (entry levels)
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
440mm Carbon for control and stability (all levels)
400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate)
390mm Carbon for Wing and Surf with good turning control and additional glide
370mm Carbon for loose feel and fast turning, with less stability (intermediate). The rear wing that does it all
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase the AXIS 740mm carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
The AXIS SP 760 Carbon front wing was designed with Surf Foiling in mind. As the medium size of the new Surf Performance wings, the 760 allows you to handle more juice in bigger and steeper conditions, while maintain control and loose turning. The 760 will be your choice when the waves are sucky and steep or close together with lots of link ups. Full skatepark mode.
Both the 760 and 860 (the bigger wing of the surf family), sit very well in the pocket. They don't blast you too far out, like some other wings do. These are true surf wings with good pumpability.
You can throw the Surf Performance wings (660, 760, 860) around a lot more in the waves which we love so much. And due to their deep V design, they won't throw you too fast ahead of the wave. They are much easier to keep in the zone.
Other than prone, the AXIS SP 760 carbon wing is a fantastic wave and cruise style kite foiling wing. You can ride is as slow as you want, turns on a dime, and you can still push it on those faster downwinders. A perfect one wing kite setup.
Ideal for:
Prone foiling bigger waves
Tow-in foiling
Kite Foiling freeride or waves
AXIS SP 760
WINGSPAN: 760mm / 76cm (30 inches)
CHORD: 190mm (0.787 inches)
ACTUAL AREA: 1218 square cm / 189 square inches
PROJECTED AREA: 1130 square cm / 175 square inches
VOLUME: 1673 cubic cm / 102 cubic inches
Recommended use:
Surf Foiling in Medium wave
Tow Foiling in Medium wave
Kite foiling / carving / wave riding
Suggested Rear Wing:
Rear Wing 340mm Regular Carbon
Rear Wing 370mm Regular Carbon
Rear Wing 400mm Regular Carbon
Rear Wing 460mm Flat High Aspect Carbon
Suggested Fuselage lengths:
Red Short (fast turning, with good balance of control)
Red Ultrashort (super loose and fast turning - intermediate level riders)
Red Crazyshort (insanely loose and fun turning - advanced level riders)
The AXIS SP 660 Carbon front wing was designed with Surf Foiling in mind. As the smaller size of the new Surf Performance wings, the SP 660 addresses the need of experienced surf foilers to ride bigger waves, with loose side to side turning and higher speeds.
The SP 660 Carbon front wing turns fast and effortlessly. It gives the rider the closest possible feeling of a riding a surf board. It's balance neutral, w/out requiring more front foot pressure as you carve or surf waves at speed.
The SP 660 Carbon front wing can equally ride slow and fast w/out any change on performance.
Ideal for:
Prone foiling bigger waves
Tow-in foiling
Kite Foiling freeride or waves
AXIS SP 660
WINGSPAN: 660mm (26 inches)
CHORD: 200mm (0.787 inches)
ACTUAL AREA 1113 square cm / 173 square inches
PROJECTED AREA: 1034 square cm / 160 square inches
VOLUME: 1582 cubic cm / 97 cubic inches
Recommended use:
Surf Foiling in Medium / Large wave
Tow Foiling in Medium / Large wave
KITE foiling / carving / wave riding
Suggested Rear Wing:
Rear Wing 370mm Regular Carbon
Rear Wing 400mm Regular Carbon
Suggested Fuselage lengths:
Red Short (fast turning, with good balance of control)
Red Ultrashort (super loose and fast turning - advanced level riders)
The ESCAPE HM CARBON foils are nothing short of masterpieces of hydrodynamic refinement and composite craftsmanship.
Aspect Ratio: 6
Amazing glide and speed
Control at high speed
Unmatched rigidity
Full Monobloc carbon construction
Designed to foil at high speeds with full control no matter the conditions, these foils will lead to incredible performances, but their “raisons d’être” are first and foremost to provide the most exhilarating ride on the water.
In light or strong winds and whether kite foiling or wing foiling, the ESCAPE HM CARBON foil is a playful, nimble, and enjoyable hydrofoil that delivers an amazing glide with a terrific speed potential and utmost control.
Such a high level of performance is only possible by using a Full Monobloc construction where the entire plane (front wing, fuselage, stabilizer) is molded together in a single piece made of pre-preg carbon. This consequently reduces the hydrodynamic drag and results in a stiff and solid foil. The newly added High Modulus Carbon fiber layup leads to even more rigidity, control, and dependability that will drive you to incredible feats in each of your session.
This finessed foil is incredible for kite foil riders looking for speed, but it also delivers powerful sensations while carving. The pro wing foilers will also appreciate its quality and sophistication as they push the limits of this discipline.
The R275 SURF stab is specifically designed for carving and pumping. Its flatter arch shape delivers high efficiency while pumping to connect more waves. Its shape and smaller area ensure sharp turns and more speed with a very loose feeling, closer to that of a shortboard. It is a high-performance stab that suits the PHANTOM FCT wings.
Built with the RTM technology and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance.
Efficient pumping
Sharp turns
Loose feeling
Recommended Plane:
Fast and agile, the C220 SURF stabilizer provides a fantastic glide and a lot of freedom when riding.
Fantastic glide
Complete turning freedom
Constant balance for perfect control
Easy to turn and roll from rail to rail, it is a perfect fit for all the carving lovers who will enjoy its maneuverability. Designed with a high aspect ratio and thin profile, the C220 SURF stabilizer provides a friction-free feel when riding and allows for nice accelerations. Constant balance (front/back) is maintained at all speeds, which always means more control. This stab fits well with the MIRAGE CARBON front wings.
Built in pre-preg Carbon and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance.
Ref. 77207-0307
Recommended Plane:
The C275 SURF stab is specifically designed for carving and pumping. Its flatter arch shape delivers high efficiency while pumping to connect more waves. Its shape and smaller area ensure sharp turns and more speed with a very loose feeling, closer to that of a shortboard.
Efficient pumping
Sharp turns
Loose feeling
Built in pre-preg carbon and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance.
Ref. 77207-0306
The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly. At the back, the cradle for the stabilizer is designed with the right angle to make the front wing fly with ease and efficiency.
The FUSELAGE CARBON is built in pre-preg carbon with a foam core to keep the weight extremely light. Some solidly anchored brass inserts are used for all fastenings.
Best maneuverability
Better responsiveness
Ultra-light carbon construction
Weight: 0.20 kgLength: 37 cm
The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly. This fuselage is built in pre-preg carbon with a foam core to keep the weight extremely light. Some solidly anchored brass inserts are used for all fastenings.
This fuselage is specifically built for the MIRAGE CARBON wings as the cradle for the stabilizer is located underneath the fuselage rather than on the top. It is perfectly thought-out and is designed with the right angle to make the front wing fly with ease and efficiency.
Stiff connection
Ultra-light carbon construction
Bottom fitting stab connection
Weight: 0.2 kg
Ref. 77207-0203
Only sold with the EAGLE 690
The monobloc construction improves stiffness and reduces turbulence by eliminating connections and providing a more streamlined design. This premium connection will make any foil more playful, more stable, and faster. The monobloc also removes two screws: you’ll be on the water faster!
In the same vein as the DW210 stab, the 190 is suitable for more solid conditions or more experienced riders. Thanks to its smaller surface area, the 190 offers more speed and better maneuverability.
The High Modulus Carbon fiber layup used for this Monobloc Tail leads to even more rigidity and dependability that will propel you to incredible performances in each session.
Aspect ratio: 8.8
Made for high speeds, long downwinds and strong conditions
Monobloc construction for better stiffness and reduced turbulences
Astoundingly thin and flat, the DW210 HM stabilizer was built for speed. Its high aspect ratio will offer incredible glide at high speeds and will help you stay up and flying above the water endlessly. This stabilizer will not only optimize your velocity but also your pumping efficiency and will help you keep your momentum.
Unmatched glide
Perfect for speed and downwind
Thin and optimized design for minimal drag
Efficient pumping
The High Modulus Carbon fiber layup used for this stab leads to even more rigidity and dependability that will propel you to incredible performances in each session.
The DW210 HM is best used with our EAGLE front wings to get the most speed and downwind performances out of your hydrofoil.
Imagine a dedicated surf foiling wing, that lets you foil waves like a surfer would. If you’re anything like us, you’ve been dreaming of an effortless turning wing, that inspires confidence when dropping in, that has a gentle, predictable easy lift up onto foil. A foil that not only handles breaches but encourages them. No wave is the same, sometimes you need a turn of speed, and on another, you need to slow right down but stay on foil. A wing you can just forget about and get on with the business of enjoying yourself. Of course, that wing has to be capable of pumping you back out to do it all again and again. The wait is over, meet the AXIS Spitfire.
You’ll recognise it by its distinctive elliptical outline, straight median line and lack of aggressive turndown through the tips. Moderate chord lengths, that taper smoothly from the centre to the tips, encourage smooth, predictable but precise turning. Reduced foil thickness for enhanced top end to compliment the greater chords providing easy low end.Many of these attributes are shared by the ARTPRO Range of wings, and in fact much of what we learned in the development of that line fed into the Spitfire’s make-up. Through the development process, we put the Spitfire through its paces. The smaller sizes are fast with explosive turning. The larger sizes are great for smaller spots and larger riders. The Spitfires are versatile front wings, able to ride waves or flat water across prone, SUP, winging, wake, downwind, lake pumping and kite foiling disciplines. They do it all.Spitfire foils are ideally matched with our Black Advance fuselage and Progressive or Skinny rear wing ranges.
If you need screws for this wing, don't forget to add a screwset to your order.
Imagine a dedicated surf foiling wing, that lets you foil waves like a surfer would. If you’re anything like us, you’ve been dreaming of an effortless turning wing, that inspires confidence when dropping in, that has a gentle, predictable easy lift up onto foil. A foil that not only handles breaches but encourages them. No wave is the same, sometimes you need a turn of speed, and on another, you need to slow right down but stay on foil. A wing you can just forget about and get on with the business of enjoying yourself. Of course, that wing has to be capable of pumping you back out to do it all again and again. The wait is over, meet the AXIS Spitfire.
You’ll recognise it by its distinctive elliptical outline, straight median line and lack of aggressive turndown through the tips. Moderate chord lengths, that taper smoothly from the centre to the tips, encourage smooth, predictable but precise turning. Reduced foil thickness for enhanced top end to compliment the greater chords providing easy low end.Many of these attributes are shared by the ARTPRO Range of wings, and in fact much of what we learned in the development of that line fed into the Spitfire’s make-up. Through the development process, we put the Spitfire through its paces. The smaller sizes are fast with explosive turning. The larger sizes are great for smaller spots and larger riders. The Spitfires are versatile front wings, able to ride waves or flat water across prone, SUP, winging, wake, downwind, lake pumping and kite foiling disciplines. They do it all.
Spitfire foils are ideally matched with our Black Advaance fuselage and Progressive or Skinny rear wing ranges.
If you need screws for this wing, don't forget to add a screwset to your order.
849,00 €*
Ce site Web utilise des cookies pour garantir la meilleure expérience possible. Plus d'informations...