REEDIN Spare Fin Set 5cm incl Handle

DESCRIPTION   DEMO PRODUCT! SLIGHTLY USED! The Rad Pad and strap system was designed to offer the maximum amount of comfort and adjustability. It was built around an HT Nylon skeleton frame that is molded inside a DUO density EVA core base.The core base guarantees the correct amount of stiffness, a secure hold, and a firm grip.Equipped with an adjusting system that allows micrometric accuracy in all directions and angles, it is possible to trim the straps position, angle, and size to any desired specifications.The EVA cushioned pad base is constructed of 3 different densities. The main pad outline is comprised with mid density, the top pad is a softer grip EVA density, and the third density can vary according to the replaceable heel cushioning option.   FEATURES MTS – MICROMETRIC TRIM SYSTEM:The name says it all. Micro adjustments for maximum comfort and performance. Fine tune for easy and effective customization. DUO DENSITY EVA CORE BASE:EVA cushioned pad base is constructed of 3 different densities. The main pad outline is comprised with mid density, the top pad is a softer grip EVA density, and the third density can vary according to the replaceable heel cushioning option. FOUR POINT STRAP SYSTEM:The four point strap system allows trim to the position, angle, and size of the strap. Small, Medium, and Large connection points provide adjustments, not only according to the length of your foot, but also the height, and thickness.

BARSYSTEM X6 Performance and lightness combined in a safe and comfortable package – our Barsystem X6 adds direct feedback and perfect grip to your kite setup. With no more than 23mm diameter the Barsystem provides a soft touch and comfort, which allows you to navigate your kite precisely and in a controlled manner even in the roughest conditions. One bar does it all! The Barsystem X6 sets a new standard in performance, comfort and safety. Available in 46cm and 52cm width in order to offer the perfect setup for each size of your kite range. SHORT BAR 46cm   //   LONG BAR 52cm

The Fusion slider vest FZ (frontzipped) half padded is the impact vest for all watersport activities. YKK front zip for easy access and high quality foam padded. This half padded slider vest can be used with a waist harness, no padding were the harness is placed with extra grip surface . Front zipper for easy entry and heavy padded panels for impact, stretch and compression.Made with high density foamhalf padded for combined use with a harnessgrip wave tech on half padded vestarmadillo armourYKK front zipper for easy entrymultiple padded panels for impact, stretch andcompression optimization

SIZES 55cm

PERFORMANCE FREERIDE All-round performance and versatility in a huge range of conditions will spark your motivation to push your progression and go for bigger jumps. We completely redesigned the Spark and newly calculated its lift distribution leading to a more sportive behavior. A slightly wider but flatter wing tip reduces bar pressure and increases the Spark’s turning speed, which leads to a very agile handling. In order to stabilize the tips during fast turns and small radius loops, the side strut was moved slightly towards the tip. The flatter leading edge bending curve design in the center improves the Spark’s performance, especially on upwind tacks. With the addition of the Spark 15 LW and 17 LW you’ll be able to utilize the stable flying characteristics, controllability, power and great hang time in a wider range of conditions. The Spark combines easy jumping, low bar pressure and control with power, great lift and sportive handling, which allows you to enjoy its outstanding versatility in a huge wind range.   Sizes 5.0  | 6.0 | 7.0  | 8.0 | 9.0  | 10.0 | 11.0  | 12.0 | 15.0 | 17.0 Colors C1 : Dark Blue / Orange C2 : Turquoise / Dark Blue   WIDER BUT FLATTER TIPS: The introduction to wider and flatter tips leads to increased turning speed and lower bar pressure. UPDATED LIFT DISTRIBUTION: A newly calculated lift distribution provides a more sportive behavior. FLATTER LEADING EDGE CENTER: With a slightly flatter LE center performance and upwind capability is optimized. REPOSITIONED SIDE STRUT: Side struts were slightly moved towards the tip to stabilize during fast turns and small radius loops. NEWLY INTRODUCED SIZES: The Spark 15 LW and 17 LW transfer the Spark’s characteristics into super light wind conditions.

FEATURES / / 50% Lighter Than G10 Fins/ 10% More Upwind Performance/ 15% Less Drag MATERIALS / / Nylon/ Stainless Steel M6 Bolts

Infos & Characteristics The OFFSHORE is made for those who spend their day out there. It allows you to carry water, a tool, your phone, a snack, safety equipment and much more thanks to its practical and accessible pockets. Its fit is inspired by trail running vests, hence maintaining a great freedom of movement and mobility of the upper body once at sea. The OFFSHORE takes up as little space as possible on the water, while still being able to carry a maximum number of accessories, including a wing! Indeed, thanks to its two external straps, it allows you to deflate in total comfort. Once you've reached your starting point, sit on your board, fold the wing, open the two straps, and compress the wing outside the bag. What's more, the often-flashy colors of the wings make you even more visible from afar. We advise you to use the WING PADDLE ATTACHMENTS we've developed, so that you can secure your paddle along the central strut of your wing. The OFFSHORE bag has paddle attachments, but having the paddle in the wing is much more comfortable. A word about “deflating”: SUP foil downwind is becoming increasingly popular, but the logistics of a downwinder are complicated. Riding upwind with a wing, deflating, and then paddling out is much more practical: no car, possibility of choosing the length of your DW, etc. MANERA has therefore decided to create a light, practical vest adapted to this sport: the OFFSHORE. Note related to SUP foil downwinding: There are handy, mini hand pumps that can re-inflate a wing in just a few minutes, up to 6-7 PSI. These pumps can be a safety feature in case of difficulty (e.g. inability to take-off). They fit in the OFFSHORE's pocket, and we've designed a nozzle to adapt these pumps to F-ONE wings’ valves. Download the file HERE and have the part printed by your local 3D printer. *Disclaimer: Downwinding require physical preparation, proper security devices, and assistance at sea. Please do not attempt any downwinders alone or without proper training.