SPIRIT FREERIDE 700 / 90
Le Spirit Freeride est un foil à la fois polyvalent et accessible, et l’outil parfait pour améliorer rapidement ses aptitudes en hydrofoil.
CARACTÉRISTIQUES PRINCIPALES
DUOTONE SPIRIT FREERIDE
FOIL POLYVALENT, FACILE D’USAGE ET ACCESSIBLE
LE SPIRIT FREERIDE EST UN FOIL POLYVALENT, FACILE D’USAGE ET ACCESSIBLE, ET L’OUTIL PARFAIT POUR AMÉLIORER RAPIDEMENT TES APTITUDES EN HYDROFOIL.
CONTRÔLE DE TRAJECTOIRE ET DE DIRECTION
BON CONTRÔLE DE TRAJECTOIRE ET DE DIRECTION PRÉVISIBLE DANS TOUTES LES SITUATIONS.
NOUVEAU FUSELAGE EN ALUMINIUM AVEC UNE POCHE POUR LE RACCORDEMENT AU MÂT
UN NOUVEAU FUSELAGE EN ALUMINIUM AVEC AJUSTEMENT TRÈS PRÉCIS POUR LA CONNEXION ENTRE LE MÂT ET LE TALON POUR UNE RIGIDITÉ MAXIMALE ET UNE MEILLEURE RANSMISSION DES IMPULSION DE DIRECTION.
NOUVEAU PRODIL DE MÂT AVEC LONGUEUR DE CONNECTION PLUS LONGUE
LE NOUVEAU PROFIL DE MÂT AVEC UNE PLUS GRANDE LONGUEUR DE CONNEXION ÉLIMINE LA VENTILATION À VITESSE ÉLEVÉE.
AILES AVANT ET ARRIÈRE EN COMPOSANT CARBONE
AILES EN COMPOSANT CARBONE UNIQUE ET INCROYABLEMENT RÉSISTANT.
FORMULA 1 FUSION TECHNOLOGIE
LA FORMULA 1 FUSION TECHNOLOGIE EST UTILISÉE POUR LE RACCORDEMENT DU MÂT À LA PLANCHE - MADE IN GERMANY !
DÉTAILS
DUOTONE SPIRIT FREERIDE
L'objectif avec le foil Spirit Freeride est de trouver le compromis parfait pour un usage polyvalent. Il s’agit d’une aile stroke, dans le sens où il suffira d'un seul envoie du kite en pleine puissance pour sortir de l'eau et maintenir le vol à faible vitesse. L’ailette arrière Spirit est suffisamment grande pour offrir un bon contrôle même à faible vitesse, mais pas trop non plus pour ne pas rester bloqué en plage haute. Les winglets offrent un bon contrôle de trajectoire et de direction. Il n’y a pas de meilleur choix pour démarrer ta carrière de freerider que le foil Spirit Freeride, proposé par ailleurs à un prix imbattable.
Hybrid Foil
Wingfoiling – Set
The Hybrid Foil with Double US Plate adapter offers all-round performance and the freedom to customize the foil according to your individual requirements. A smooth and extremely early take-off, control in the air and a lot of performance potential provide both novices and advanced foil riders with the right setup for their flight. You can choose between an 85cm and 72cm CNC milled aluminium fuselage for either increased ease of use or higher performance and agility. Depending on your setup the Hybrid Wing Foil Set allows you to cruise in almost non-existent winds, but also to race in extremely high-wind conditions. The 85cm aluminium mast with incredible lightness and rigidity makes the Hybrid Foil a cost-efficient foil set with enormous performance potential.
ADAPTABLE MODULAR DESIGN
Each Foil Set from the GA Foils collection can be adjusted to your demands thanks to the wide range of interchangeable spare parts. This allows you to tune your basic set for different conditions, riding styles and skill levels without having to replace the complete foil. Just change the front wing, fuselage, mast or box adapter according to your requirements and enjoy the new characteristics of your foil.
CHANGEBALE FRONT WINGS
A wide range of different front wings provides riders of different skill levels and weights with exactly the right setup for various conditions. The FREE front wings in 2500cm², 2000cm², 1500cm², 1200cm² and 900cm² impress with a fine mixture of comfort, performance and lift, while the HP front wings in 1750cm², 1450cm², 1150cm² and 1050cm² aim at highest performance and speed with their higher aspect ratio.
All FREE and HP front wings are compatible both with the Hybrid and the Mach 1 Foil Set.
HYBRID ALUMINIUM ADAPTER
Three different adapters for Powerbox, Double US Plate or Deep Tuttle fin boxes are compatible with the Hybrid aluminium mast, which allows you to use the foil in different boards and foiling disciplines.
HYBRID ALUMINIUM MAST
The 85cm aluminium mast of the basic Hybrid setup can be exchanged with a 65cm, a 75cm or a 95cm version, depending on your preferences and the spot you are foiling at. All Hybrid masts provide a great mix of stiffness, lightness, strength and cost-efficiency.
ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Hybrid provides a solid connection to the compatible aluminium masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can adapt the Hybrid Foil to foiling with a windsurfing sail easily.
1750
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible!
Recommended for novice riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil.
Recommended for novice heavy weight riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly. At the back, the cradle for the stabilizer is designed with the right angle to make the front wing fly with ease and efficiency.
The FUSELAGE CARBON is built in pre-preg carbon with a foam core to keep the weight extremely light. Some solidly anchored brass inserts are used for all fastenings.
Best maneuverability
Better responsiveness
Ultra-light carbon construction
Weight: 0.18Lenght: 33 cm
Our carbon fuselages are available in different sizes. A longer fuselage will bring more stability, while a shorter fuselage will help with sharp and quick turns.
SPIRIT SURF 1500 / 75
SURF / FREERIDE / STRAPLESS
Si tu cherches un foil incroyablement polyvalent pour les vagues, tu viens de le trouver : surf foil, wing foil et kite foil, tout est possible avec ce foil !
CARACTÉRISTIQUES PRINCIPALES
DUOTONE SPIRIT SURF
EXCELLENT LIFT ET GRANDE PUISSANCE
LIFT INCROYABLE ET ÉNORMÉMENT DE PUISSANCE.
INCROYABLE STABILITÉ MÊME PAR MER AGITÉE
MÊME PAR MER AGITÉE, LA SPIRIT SURF 1500 RESTE STABLE ET TE GARANTIT DES VOLS SANS FIN.
ADAPTÉE AU SURF FOIL ET AU WING FOIL
AILE LA PLUS POLYVALENTE, ADAPTÉE AU SURF, AU KITE SURF ET AU FOIL.
PLAGE HAUTE EXCEPTIONNELLE
ÉNORME PLAGE HAUTE MÊME EN CAS DE VENT FAIBLE ET DE MER PLATE.
AILES AVANT ET ARRIÈRE EN CARBONE
AILES EN CARBONE ULTRA LÉGÈRES POUR DES PERFORMANCES OPTIMALES.
FUSION FIT SYSTEM
NOUVEAU FUSION FIT SYSTEM POUR UNE RÉSISTANCE EXCEPTIONNELLE ET UNE CONNEXION DES PLUS RIGIDES.
DÉTAILS
DUOTONE SPIRIT SURF
The Spirit Surf 1500 is the combination of years of design and experience in the water. The huge wing makes foiling easy, you can ride with a smaller kite, or just get foiling before everyone else. Massive amounts of lift are produced by the profile, and the stall speed is so low you'll think it's floating. The Spirit Surf is forgiving and allows you to learn the basics quickly; it's also great fun to ride in the waves, keeping the top speed down so you can harness the power of the wave rather than use the kite. The connection of the aluminium mast ensures the best connection for the mast into the top plate and fuselage. The connection is important for the transmission from your feet to the foil, giving you total control. A new 250 sqcm back wing delivers an incredible surf feeling. The whole system is modular, and you can run different mast and wing configurations for various conditions. The wing is big enough that an experienced surf foiler will be able to prone paddle into some waves and it will also work as a wing foil set up with the right board. This makes it an incredibly versatile piece of equipment that will spend far more time in the water than in the garage! If you want a wing with more lift and stability than you could imagine then the Spirit Surf 1500 is it!
FUSION ALLOY TOP PLATE MKII
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast.
Features:
Precision CNC machined aircraft grade, anodized 6061-T6 aluminium
Incredible torsional stiffness
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all.
Features
Recommended with S215 Stabilizer
Super low stall speed
Effortless pumping
Surf-style turning (smooth rail to rail and surf yaw snap
Forgiving and accessible for faster progression
Materials
Pre-Preg Carbon
Titanium Screws
FUSION V-SERIES TAIL STABILIZERS
HIGH ASPECT
SIZES: 180 / 230 / 285
One of the biggest effects on hydrofoil performance comes from the stabilizers. In a sport that is so diverse in its attributes and styles of riding, you need to have the right product to help you get the maximum performance from your system. Introducing the new V-Series Stabilisers. V represents versatility, and through the modular Fusion system, you are able to custom tailor your ride. Add a V-Series Stabiliser to any of the Cabrinha Fusion foils and get ready for the next step in performance & usability.
Features:
Optimal efficiency and maneuverability
Flat center, to downward tips, for perfect balance between locked-in feel and agility
Single molded components for minimal drag
Full prepreg carbon construction
PMI core for superior strength to weight ratio
180 cm², WS-340, AR-6.42
230 cm², WS-400, AR-6.96
285 cm², WS-450, AR-7.11
Set Includes:
Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws, {(ear fuselage not included)
JET 1250 COMPLETE
Foil Surfing/Wake Foiling/Wing-Surfing
PRODUCT DESCRIPTION
Naish Jet foils feature a medium aspect ratio delta wing planform with moderate anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from wind surfing and wing-surfing to downwind kite foiling. The 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping.
To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.
Jet 1250 is ideal for riders 160-210 lbs
PERFORMANCE FEATURES
Jet 1250 Front Wing = Optimized lift, speed & turning
Stabilizer 320 Back Wing = Intuitive turning & stability
75 cm Mast = Improved turning & pumping performance
Lighter Design = Better control & response
CONSTRUCTION FEATURES
Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years
Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast
Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts
5 x 20 mm Torx Head Stainless Steel Screws (Connect Wings to Fuselage) = Superior torque + corrosion resistant
3 x 25 mm Torx Head Stainless Steel Screws (Connect Mast to Fuselage) = Superior torque + corrosion resistant
4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Direct Connect Plate to Board) = Superior torque + corrosion resistant
The F-ONE Alu Fuselage 70 provides an ultra-rigid wing connection. Built in aluminum, it is very strong and allows the suitable front wings and stabilizers to be connected effortlessly.
• Super stiff wing connection• Solid aluminum construction• Slender and reinforced hydrodynamic section
This fuselage connects directly to F-ONE aluminum masts. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. The aluminum profiles make the most of this homogeneous material to offer perfect rigidity, both in torsion and in bending.This fuselage is recommended for the IC6 650 V3 front wing. It is supplied with the necessary screws to connect the front wing (2x M6-25mm and 2x M6-15mm), the mast (2x M6-25mm) and the stabilizer (2x M6-15mm).You cannot use a carbon mast on this fuselage.
Le Sky SUP est un modèle 100% dédié au foil, conçu pour maximiser votre plaisir - même dans de petites vagues et vous offrir les plus longs rides de votre vie ! Tout sur le Sky SUP a été optimisé pour attraper des vagues le plus facilement possible. Ses dimensions compactes, ses épais rails biseautés et sa carène dotée de channels la rendent stable et permettent de ramer sans encombre en ligne droite. Grâce à son pont légèrement rabaissé, la position à la rame offre un effet de levier et un contrôle considérable sur le foil. Cette année nous avons amélioré ses performances grâce à un rocker plus haut, un outline épuré et un avant plus étroit. Côté arrière, un décrochement permet de réduire la traînée dans les vagues plus raides tout en rendant le pomping sur le foil plus efficace. Toutes les tailles sont également idéales pour le Wing Foiling.
Red Advance Fuselage (+40)
If you're into pushing the envelope in Prone, SUP, Wake, Wing or Pump, these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected feeling on the larger PNG and BSC front wings? Our new Red Advance fuselage is for you.In three different sizes you get tons of options to fine tune your setup. This design sees the mast position moved 40mm closer to the front foil, opening up entirely new options for performance.The regular Red fuselages are perfectly suited to the majority of riders across all disciplines. By no means are these new Red Advance fuselage intended to replace them. They just provide options for performance and a more connected feel when pushing the limits.
As the mast position on the Red Advance Fuselage is moved closer to the front wing, the effective length of the fuselage behind the mast is now slightly increased (by 40mm).
When choosing your Red Advance Fuselage, it’s advisable to possibly opt for a length shorter than you are currently using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead.
The Red Advance fuselage is available in Short, Ultrashort and Crazyshort sizing. Compatible with all the front wings that use the red fuselage. Compared to the regular Red fuselage range, these 3 new little siblings provide a looser, smoother transition from side-to-side. The sensation our testers liken it to is similar to the sensation of moving fins forward in the tracks on a surfboard. Initiating turns becomes easier, which is great in the surf.
In an effort to reduce the use of cardboard and excess packing material, all the Black and Red ADVANCE fuselages are shipping with the matching new fuselage protective covers. Better for your gear. Better for the environment.
JET FOIL RANGE:
Jet 1050 + 1250
Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 back wing, which gives the complete setup more intuitive turning and response for pumping.
To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong.
Jet 1650, 2000, 2450
The Jet 1650, 2000, and 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling. These wings are paired with the Stabilizer 450 back wing, which gives the complete setup more lift at lower speeds and is optimized for improved turning and pumping performance.
easy take-offs, efficient pumping, ultimate gliding
Looking for fun on the water on a windless day? Go pumping with the ENSIS STRIDE, a high performance dock start, pump and SUP foil for discoverers to the crazy carvers.
The STRIDE is a high aspect ratio hydrofoil that offers exceptional lift and efficiency at low-end speed, designed for easy take-offs. The foil is perfectly balanced, supporting your take-off abilities to the max. The light and stiff mast provides optimal power transmission. The front wing and the gullwing shape stabilizer are designed to offer you exceptional pumping efficiency and control. After a few efficient pumps, the good high-end speed comes into play. The shape of the front wing reduces drag, saving you energy while pumping. You will feel like you are gliding forever.
You want to get crazy with your carving moves? The rather flat front wing with thin sweeping edges allows you to slide without disturbing the water flow across the entire foil and stalling. It is time to dance and play on the water!
STRIDE 1900 Set:
The ENSIS STRIDE 1900 is delivered as a set (73 cm mast, 1900 cm2 front wing, 70 cm fuselage, 265 cm2 stabilizer), foil mount and foil assembly screw set, allen and torx key.
Infos & Characteristics
Foil box features several compartments and protection flaps to protect a disassembled foil. Mast, front wing, stabilizer, screws & tools all have a specific room.
There’s even a compartment for a helmet.
SIZES
1100X310X200MM - 1.45KG
FUSION FQR
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Patent pending Cabrinha Foil Quick Release is an innovative new tool-less mast plate that allows you to detach your foil mast from the board in seconds. The tapered engagement provides a press fit that will ensure a solid connection without any movement. Gone are the days of trying to tetris pack your foil boards to and from the beach, simply pull the release lever and the mast detaches. The FQR release attaches to all industry standard 9cm foil board track.
Features:
Cam lever - Tool less operation
Aircraft grade extruded, anodized 6061-T6 aluminium components
Lightning fast attachment
Universal 9cm mounting
Safety key engagement
tapered engagement
Anti-line snag geometry - increased safety when kiting
Precision calibration design
FUSION H-SERIES KITS
HIGH ASPECT
SIZES: H550 / H700 / H850 / H1050 / H1300
Just when you thought a product couldn’t get better, the new H-Series MkII pushes into the future of foil design and sets a new benchmark for efficiency and performance. The design team have implemented new technology learnt from the collaboration with Sintef. Water testing in the biggest tank in Europe has refined the H-series tip shape to allow the tips to breach and re-enter without cavitation. This allows more progressive riding and radical turns, be it with a kite, wing or prone. The new leaner profile now boasts an increased speed range which helps entry into freestyle tricks or on the race field. It seamlessly pairs with any of Cabrinha’s V-series stabs and is part of the modular Cab Fusion system.
The Fusion H-Series Kits come with everything you need, you just need to add your mast of choice. (Masts sold separately)
INCLUDED IN KIT
Wing & Stabilizer
Fusion Fuselage Alloy Medium
Track Nut Train X2
Screw Set Foam Core Boards
Wing Features:
Ultra Efficient Design
Ultra Lean Profile
Refined Tip Shape.
Tapered Fit
Increased Torsional Stiffness
High Aspect Ratio
Barrel Nut Secure Connection
Pre Preg Carbon Construction
Modular Design to work with Cab Fusion Products
Tech Specs
H550- 550cm², WS 690, AR 9.52, Chord 110mm
H700- 700cm², WS 815, AR 9.49, Chord 120mm
H850- 850cm², WS 900, AR 9.53 Chord 130mm
H1050- 1050cm², WS 1000, AR 9.52, Chord 140mm
H1300 - 1300cm ², WS 1090, AR 9.14, Chord 150mm
H800- 800cm ², WS 900mm, AR 9.9, Chord 125mm
H1000- 1000cm ², WS 900mm, AR 8.1, Chord 155mm
Wing Guide:
Hybrid Foil
Wingfoiling – Set
The Hybrid Foil with Double US Plate adapter offers all-round performance and the freedom to customize the foil according to your individual requirements. A smooth and extremely early take-off, control in the air and a lot of performance potential provide both novices and advanced foil riders with the right setup for their flight. You can choose between an 85cm and 72cm CNC milled aluminium fuselage for either increased ease of use or higher performance and agility. Depending on your setup the Hybrid Wing Foil Set allows you to cruise in almost non-existent winds, but also to race in extremely high-wind conditions. The 85cm aluminium mast with incredible lightness and rigidity makes the Hybrid Foil a cost-efficient foil set with enormous performance potential.
ADAPTABLE MODULAR DESIGN
Each Foil Set from the GA Foils collection can be adjusted to your demands thanks to the wide range of interchangeable spare parts. This allows you to tune your basic set for different conditions, riding styles and skill levels without having to replace the complete foil. Just change the front wing, fuselage, mast or box adapter according to your requirements and enjoy the new characteristics of your foil.
CHANGEBALE FRONT WINGS
A wide range of different front wings provides riders of different skill levels and weights with exactly the right setup for various conditions. The FREE front wings in 2500cm², 2000cm², 1500cm², 1200cm² and 900cm² impress with a fine mixture of comfort, performance and lift, while the HP front wings in 1750cm², 1450cm², 1150cm² and 1050cm² aim at highest performance and speed with their higher aspect ratio.
All FREE and HP front wings are compatible both with the Hybrid and the Mach 1 Foil Set.
HYBRID ALUMINIUM ADAPTER
Three different adapters for Powerbox, Double US Plate or Deep Tuttle fin boxes are compatible with the Hybrid aluminium mast, which allows you to use the foil in different boards and foiling disciplines.
HYBRID ALUMINIUM MAST
The 85cm aluminium mast of the basic Hybrid setup can be exchanged with a 65cm, a 75cm or a 95cm version, depending on your preferences and the spot you are foiling at. All Hybrid masts provide a great mix of stiffness, lightness, strength and cost-efficiency.
ALUMINIUM FUSELAGE
The CNC milled aluminium fuselage of the Hybrid provides a solid connection to the compatible aluminium masts and is available in 72cm, 82cm, 85cm and 90cm. The 85cm version makes the first steps into wingfoiling extremely easy and offers comfort and stability, while the 72cm aims at highest agility for pumping and manouevre-oriented wingfoiling. With the 90cm fuselage you can adapt the Hybrid Foil to foiling with a windsurfing sail easily.
Unser neuer Quickmount Mast macht Foilen um einiges einfacher! Kein Werkzeug, kein Stress – einfach mit der werkzeuglosen Schraube am Board montieren und die Platte bleibt auch nach der Session fürs nächste Mal in deiner Lieblingsposition am Board!
LENGTH (CM)
60
75
82
90
CONSTRUCTION
AEROSPACE GRADE ALUMINIUM
AEROSPACE GRADE ALUMINIUM
AEROSPACE GRADE ALUMINIUM
AEROSPACE GRADE ALUMINIUM
DISCIPLINES
WING, PRONE, KITE, SUP, DOWNWIND, PUMP, WINDSURF
WING, PRONE, KITE, SUP, DOWNWIND, PUMP
WING, PRONE, KITE, SUP, DOWNWIND, PUMP, WINDSURF
WING, PRONE, KITE, WINDSURF
CONDITIONS
SHALLOW WATERS
FLAT WATER LAKES TO SMALL SIZE SURF
ALL WATER STATES - LAKES TO MEDIUM SIZE SURF
ALL WATER STATES - LAKES TO LARGER SIZE SURF
CHARACTER
HASSLE FREE SETUP, SPECIAL SIZE FOR SHALLOW WATERS
HASSLE FREE SETUP, EASY, MANEUVERABLE, COMPACT IN THE AIR
HASSLE FREE SETUP, DIRECT RESPONSE, GREAT ALLROUNDER
HASSLE FREE SETUP, DIRECT RESPONSE, EXTRA ROOM
COMPATIBILITY FUSELAGES
AERO AL (NO SPIRIT FL!) / FANATIC AL3.0
AERO AL (NO SPIRIT FL!) / FANATIC AL3.0
AERO AL (NO SPIRIT FL!) / FANATIC AL3.0
AERO AL (NO SPIRIT FL!) / FANATIC AL3.0
Start building your modular quiver here. The new refined aluminium mast profile section delivers an optimal balance between light weight and exceptional strength, so you can kite, wing, surf and tow foil with confidence, making use of the fully interchangeable Sonar Foil System to extend your playtime on the water. Engineered to last, with exceptional strength to weight ratio, and our unique GeoLock system for a clean, direct feel with minimum resistance on the water. The AF85 mast increases overall ride performance in choppy conditions. The AF72 mast is ideal for shallower waters, and prone surf foiling. Now with A700 Fuselage for added stability, and new S270 Carbon Stabilizer for performance and efficiency.
Items included:
AF72 or AF85 Mast, AF Board Adaptor, A700 Fuselage, S270 Stabilizer with cover, Tool Kit, Sonar Board Adaptor Screw Pack A (M8x40), Sonar Fuselage Screw Pack B (M8x35 Screws, M8 Flat Washers), Sonar Stabilizer Screw Pack C (M8x16mm)*, Sonar Travel Bag
Features
Modular Foil System
Sonar AF72 or AF85 Mast
GeoLock Load Bearing Connection
New S270 Carbon Stabilizer with easy recovery from surface breaching
Sonar AF Foil Board Adaptor
Industry-standard 165x90mm bolt pattern
NEW 700mm Fuselage
Supplied with Sonar Travel Bag
Front Wings Sold Separately
Foil to board mounting screws sold separately
FUSION H-SERIES WINGS MKII
HIGH ASPECT
SIZES: H550 / H700 / H850 / H1050 / H1300
Just when you thought a product couldn’t get better, the new H-Series MkII pushes into the future of foil design and sets a new benchmark for efficiency and performance. The design team have implemented new technology learnt from the collaboration with Sintef. Water testing in the biggest tank in Europe has refined the H-series tip shape to allow the tips to breach and re-enter without cavitation. This allows more progressive riding and radical turns, be it with a kite, wing or prone. The new leaner profile now boasts an increased speed range which helps entry into freestyle tricks or on the race field. It seamlessly pairs with any of Cabrinha’s V-series stabs and is part of the modular Cab Fusion system.
Wing Features:
Ultra Efficient Design
Ultra Lean Profile
Refined Tip Shape.
Tapered Fit
Increased Torsional Stiffness
High Aspect Ratio
Barrel Nut Secure Connection
Pre Preg Carbon Construction
Modular Design to work with Cab Fusion Products
Tech Specs:
H550- 550cm², WS 690, AR 9.52, Chord 110mm
H700- 700cm², WS 815, AR 9.49, Chord 120mm
H850- 850cm², WS 900, AR 9.53 Chord 130mm
H1050- 1050cm², WS 1000, AR 9.52, Chord 140mm
H1300 - 1300c m ², WS 1090, AR 9.14, Chord 150mm
Set includes:
Wing cover, 2 x m6x30mm, 1 x m6x15mm, m6 barrel nut, screws.
Foil Guide:
HYDROFOIL CHARACTERISTICS
The Levitaz Shaka Hydrofoil series is the choice for all your hydrofoiling styles. No matter what you plan to do, you will be right with your new Shaka. Two different sizes of front wings and an adjustable rear wing combined with our reliable hybrid masts build a perfect combination for your foiling experience.We have designed the Shaka L for SUP foiling, wave foiling in smaller waves, downwind swell foiling or just pumping in calm water. Due to the lowest take-off speed and its constant increasing lift, even the smallest swell or waves become surfable with the 2000 cm² big front wing. These characteristics together with the latest shape enable an efficient and playful pumping performance.
The adjustable rear wing enables the ideal setting for the riders´ needs. No matter if you are seeking to SUP, Surf, Wake or Pump, the Shaka L is your model.
MAST CHARACTERISTICS
Carbon/Aluminum
70 cm lenght
Open fixing points for fast and easy assembly
Suitable for 4-screw plate mount (see FAQ "Mast Interface" for measurements)
The hybrid mast in 70 cm is the perfect allround lenght for SUP-, surf-, wake-, pumpfoiling.
The interfaces are made of high-strenght anodised aluminum. The thinwall design reduces weight and supports simultanous maximum durability. The top plate has open fixing points which allow you to loosen the track nut bolts to slide the top plate out rather than completely remove them. This makes removing the mast for a fast and effortless transport easy.The low drag carbon fiber section offers maximum stiffness in bending and torsion, to guarantee a stiff and direct-handling feeling.
TECHNOLOGY
CONNECTION SYSTEMOur unique connection system allows to change the front and rear wing in seconds. For every level and every condition we offer the perfectly matching carbon wing.
The bigger SHAKA wings are manufactured with a full carbon plate contouring.
FUSELAGEThe lowest possible surface leads to minimal drag combined with maximum stiffness! We rely on our special high alloy steel comprising these advantages together. The assembly with steel is solid and very reliable.
HYDROFOIL PACK INCLUDES
COMPONENTS
Mast
Hybrid, 70 cm, 4-screw Plate Mount
Frontwing
Shaka L (2000 cm²)
Fuselage
Shaka (60 cm)
Rearwing
Shaka (300 cm²)
PARTS & ACCESSORIES
Angle Shims (2-piece set)
Angle Shims (+/- 0,6°) for adjusting the Shaka rear wing
Foil Screw Set incl. Tool
4 x M6x20, 2 x M6x14
Anti Seize Paste
Loctite LB 8065, 20g
Suitable Protective Cover Set (3-piece set)
Frontwing-, Rearwing-, Mast-Cover
Travel Bag for Foils
Travel Bag (100 cm)
SPIRIT CARVE 950 / 90
CARVE / FREERIDE
Un carving tout en douceur et une manœuvrabilité parfaite, c’est le Spirit Carve.
CARACTÉRISTIQUES PRINCIPALES
DUOTONE SPIRIT CARVE
MEILLEUR CARVING
CARVING DOUX ET MAÎTRISÉ DANS TOUTES LES SITUATIONS.
HAUTE MANŒUVRABILITÉ ET GLISSE EXCELLENTE
DIFFÉRENTS RAYONS DANS LES TURNS ET TACKS ET DE LONGUES GLISSES EN TOUTE SIMPLICITÉ POUR DES MOMENTS DE JOIE À L’ÉTAT PUR.
PASSAGE DE VAGUES RAPIDE
DANS LES VAGUES, LE CARVE ACCÉLÈRE DE MANIÈRE PRÉVISIBLE ET FACILITE LE PASSAGE DE VAGUES.
NOUVEAU FUSELAGE EN ALUMINIUM AVEC UNE AJUSTEMENT PRECIS POUR LE RACCORDEMENT AU MÂT
UN NOUVEAU FUSELAGE EN ALUMINIUM UNIQUE AVEC AJUSTEMENT TRÈS PRÉCIS ENTRE LE MÂTE ET LE TALON ASSURE UNE RIGIDITÉ MAXIMALE ET LA MEILLEURE TRANSMISSION DES IMPULSIONS DE PILOTAGE.
NOUVEAU PRODIL DE MÂT AVEC LONGUEUR DE CONNEXION PLUS LONGUE
LE NOUVEAU PROFIL DE MÂT AVEC PLUS DE LONGUEUR DE CONNEXION ÉLIMINE LA VENTILATION À VITESSE ÉLEVÉE.
AILES AVANT ET ARRIÈRE EN CARBONE
AILES AVANT ET ARRIÈRE EN CARBONE PUR POUR DES PERFORMANCES MAXIMALES ET UN LOOK SPLENDIDE.
DÉTAILS
DUOTONE SPIRIT CARVE
Le nouveau foil 950 Spirit Carve a été développé pour offrir une manœuvrabilité et une glisse maximales, et pour permettre de réaliser des tacks, des jibes et des 360°. Il s’agit d’une version réduite de foil de surf pur. La 950 se lève rapidement et offre une stabilité incroyable pour des carves doux et maîtrisés sur de petites vagues ou en eau calme. Le foil offre maîtrise, carving, glisse et des transitions parfaites avec une stabilité incroyable et une grande prévisibilité pour ceux qui recherchent un mélange de sensations entre le kite et le foil de surf.
1 198,00 €*
Ce site Web utilise des cookies pour garantir la meilleure expérience possible. Plus d'informations...