Hardware Kit M6 to M8 Screws Adapters Washers adapter from M8 to M6 x 3 For connecting M6 screws in M8 holes.

1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET   UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET

Der Cabrinha Foil Mast ist voll kompatibel mit allen Cabrinha Foils von 2016 bis 2020 (ausser dem AV8) The CabrinhaFoil Mast is fully compatible with all Cabrinha Foils Years 2016,2017,2018,2019 and 2020 (only not the AV8 foil)   Größen SIZES40 cm | 60 cm | 85 cm

Naish 2022 Foil Mast Aluminium 55 cm Naish 2022 Foil Mast Aluminium 65 cm Naish 2022 Foil Mast Aluminium 75 cm Naish 2022 Foil Mast Aluminium 85 cm Naish 2022 Foil Mast Aluminium 95 cm

Lithium Grease (75 ml)High-quality lubricating grease based on lithium soaps.Particularly resistant to water, does not dirty, lubricates and protects any type of mechanical coupling from corrosion and wear. Indispensable for nautical uses.The package contains 75 ml of lithium grease.

2022/23 Naish Jet Foil Series for maximum performance There are three versions: Jet Foil HA (High Aspect) Semi Complete Jet Foil MA (Medium Aspect) Semi complete Jet Foil Standard (Low Aspect) Semi Complete Here are the main differences between these models. High Aspect (HA) Foil: High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio). These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance. High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio. Medium Aspect (MA) Foil: Medium aspect foils strike a balance between the characteristics of high and low aspect foils. They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability. Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control. Low Aspect (LA) Foil: Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio. These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed. Low aspect foils are often chosen for learning to foil and for cruising at lower speeds. When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use. The high number (for example 1600) gives you the surface of the front wing in cm2. Scope of delivery:Jet front wing + EVA coverStabilizer Jet HA + EVA coverFuselageCarrying caseTorx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)

Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"  

Hardware Kit Carbon Plate to Rail Board Flat Head Screws Hex M8x30 x 4 Truck Nuts M8 x 4 Hardware Kit to connect your carbon plate CP02K to Rail Boards (Kraken Modular System).

These six shims can change the incidence angle of your stabilizer for -0,5°/-1°/-1,5°/-2°/-2,5°/-3° degrees

Torx T40 Torx T40 tool compatible with all Sonar Foil screws   Features Manufactured from high quality Chromium-vanadium steel​ Comfortable anti-slip ergonomic T-handle​ Dual-ended design for fast assembly and higher torque​ To extend longevity wash with fresh water and dry after use* ​

The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.

Our new high-strength pre-preg carbon fuselage is strong, durable and corrosion resistant, and weighs ~50% less than the alloy version, with equal strength and stiffness. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. The forgiving longer C700 fuselage is ideal for wing-foiling or learning to foil, offering greater stability and more control. Features High-performance carbon pre-preg construction Weighs ~50% less than the alloy version with equal strength and stiffness GeoLock tapered geometry locking system for optimised load bearing connection Hydrodynamically-optimised shape for minimal resistance Compatible with all Sonar Masts Compatible with all Sonar Front Wings Available in C600 or C700 sizes

Lockable T-Nuts are specifically designed for riders looking to save time during setup and maintain stable, precise settings. This ingenious, minimalist system makes it easy to lock the screws into the Twin-Tracks, guaranteeing optimized, fast and efficient assembly. As well as insuring fixed settings, this system prevents the loss of the T-Nuts during assembly or handling. Only one tool is required (Torx wrench), and an included template helps you place the T-Nuts perfectly from the outset.

FUSION H TAIL STABILISER HIGH ASPECT FOIL HS180 DESIGN PROFILE Swept outline, Ultra lean efficient profile, moderate anhedral RIDER PROFIL Versatile efficient and fast wing set for high performance WING FEATURES Optimal efficiency & maneuverability Flat center, to downward tips, for pefect balance between locked-in feel and agility Single molded components for minimal drag Full prepreg carbon construction PMI core for supperior strength to weight ratio Includes: Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws The HS180 High aspect stabiliser has been seamlessly molded as one single component into the fuselage to give exceptional efficiency and stiffness.  it allows the rider complete control through varying degrees of the turn and has been precisely tuned for use with all H-series and X-series wings.

Created in collaboration with Cloud IX surf foils the Impulse wing set confidently crosses kite, surf and wake hydrofoiling. Designed to provide rapid lift and long glide, along with a wide speed and wind range. The Impulse will take your freeride kite hydrofoiling to the next level. Allowing more time for tack and gybe transitions, constant wing engagement on jump landings, and the ability to drop a size kite or get out in even lighter wind conditions than ever imagined. These same design attributes make the Impulse ideal for mounting on a hydrofoil compatible SUP or prone surfboard. Efficient and smooth controlled lift, along with the ability to generate glide by pumping the wing, keeps swell energy connectivity easy and manageable. This magic can be translated behind the boat where the Impulse excels at sustained hydrofoiling on both the primary and secondary wakes with or without the rope!Front wing area: 1100 cm2 Standard Impulse set sizeMast Length: 94.8cm alloy 2480gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 4420 (with variance) Short mast Impulse set sizeMast Length: 60cm alloy 1770gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 3750g (with variance) Technical DataRider level Intermediate – AdvancedConfort zone speed 12-18 miles/hLow end lift speed 5 miles/hTop end speed 24 miles/h Kite & Surf Crossover use for kite, surfing, SUP and wake Carbon Wings Carbon construction low aspect wing Alloy Mast Efficient profile extruded alloy mast (available in 2 lengths) Carbon Fuselage Carbon fuselage with dual position rear wing mounting Lightweight Lightest crossover hydrofoil kit available

Carbon 35 Masts 75 cm, 85 cm, 95 cm, 105 cm The new Naish C35 monocoque composite mast with its integral molded base features 35% UD carbon content and strikes the perfect balance of technology and performance at a great price. Weight is kept to a minimum thanks to a dual expanding foam core, and the smaller profile (shared with the C100 mast) reduces drag dramatically. Corrosion issues are completely eliminated thanks to (2) 12 mm stainless steel inserts laminated into the mast structure and paired with our molded fuselage connector that acts as a corrosion barrier.

GRAVITY FCT 2200 COMPLETE FOIL WITH MAST The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential. Right in the line of its best-selling carbon sibling, this new Gravity is the ideal foil to get started and progress in wing-foiling and surf-foiling.   Smooth take-off Stability and lift Easy to turn  Area: 2195 cm²Span: 110 cmAspect Ratio: 5.5Weight: 2 kg (wing only)Alu Fuselage: 74 Surf

HIGHLIGHTS Lightwind Wing Foiling Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "This is the easiest to ride hydrofoil I’ve ever been on in my life." - George Hradil Wing / SUP / Surf The new 2200R reflexed wing is brilliant for lightwind wing-foiling. Unbelievable stability and slow stall speed through the turn makes learning gybes and tacks easier, giving newer riders confidence to try more manoeuvres and progress quickly. Smooth carvy turns in prone for heavier riders and in SUP foiling. Touchdowns are a breeze. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 2200R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 2200R feels smaller than it is in terms of speed range and responsiveness. Lightwind Wing Foiling A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. DETAILS INCREDIBLY STABLE Gives newer riders confidence to try more manoeuvres and progress quickly PRE-PREG CARBON TECHNOLOGY Ultimate high-performance composite material LIGHTWIND WING FOILING A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.

The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws

WING / PRONE / KITE / PUMP / DOWNWIND / SUP / WIND Aufbauend auf dem positiven Feedback, das wir für unsere 60cm Alu 3BS Fuselage erhalten haben, haben wir beschlossen, diese Verbesserungen auf unsere längeren Fuselages auszudehnen. Wir haben jetzt 66 cm und 74 cm AL 3BS Fuselages, die unsere früheren Carbon-Fuselages mit 68 und 78 cm ersetzen. Die Umstellung auf Aluminium ermöglicht es uns, den Querschnitt der Fuselage zu reduzieren und dadurch den durch die Fuselage erzeugten Widerstand zu verringern. Gleichzeitig erhöhen wir die Festigkeit und das Gewicht nur um 2,5%. Alle unsere AL 3BS-Fuselagens verfügen über eine kleine Vertiefung hinten, in die der Stabilisator eintaucht und die Hydrodynamik verbessert. Sie haben große Aussparungen, wo die Befestigung des Frontflügels ist, um das Gewicht auf ein Minimum zu reduzieren. Natürlich erfordern die neuen Aluminium-Fuselages etwas mehr Pflege und müssen nach jedem Gebrauch demontiert und mit Süßwasser gespült werden, aber wir glauben, dass der Gewinn an Leistung es wert ist!  

A singular M6 track nut to be paired with our T-Lock Screws. This is the hardware that slides into the track of Slingshot Foil Boards. They are used to connect One-Lock foils to Slingshot Foil Boards. 

Stainless Steel Foil Board Track "T" Nut M8 Thread Sold as 1 eachThis is the hardware that slides into the track of Slingshot Foil Boards. They are used to connect Hoverglide and Phantasm foils to Slingshot Foil Boards. Paired with Slingshot Foil Mounting Hardware.

Our new highest quality pre-preg carbon mast delivers a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction, the refined one-piece design presents a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions. Features GeoLock.

ALU MAST 45 > 95 CM The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).