Foil Accessories – Connection, Fine-Tuning, and Protection
Hardware Kit M6 to M8 Screws Adapters Washers adapter from M8 to M6 x 3 For connecting M6 screws in M8 holes.
Lithium Grease (75 ml)High-quality lubricating grease based on lithium soaps.Particularly resistant to water, does not dirty, lubricates and protects any type of mechanical coupling from corrosion and wear. Indispensable for nautical uses.The package contains 75 ml of lithium grease.
These six shims can change the incidence angle of your stabilizer for -0,5°/-1°/-1,5°/-2°/-2,5°/-3° degrees
Hardware Kit Carbon Plate to Rail Board Flat Head Screws Hex M8x30 x 4 Truck Nuts M8 x 4 Hardware Kit to connect your carbon plate CP02K to Rail Boards (Kraken Modular System).
Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"
Torx T40 Torx T40 tool compatible with all Sonar Foil screws Features Manufactured from high quality Chromium-vanadium steel Comfortable anti-slip ergonomic T-handle Dual-ended design for fast assembly and higher torque To extend longevity wash with fresh water and dry after use*
The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.
The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws
Lockable T-Nuts are specifically designed for riders looking to save time during setup and maintain stable, precise settings. This ingenious, minimalist system makes it easy to lock the screws into the Twin-Tracks, guaranteeing optimized, fast and efficient assembly. As well as insuring fixed settings, this system prevents the loss of the T-Nuts during assembly or handling. Only one tool is required (Torx wrench), and an included template helps you place the T-Nuts perfectly from the outset.
Spare Titanium Pin and Shims for Q02K Titanium Pin x 1 Default inox shims 6.1x14x0.5 mm x 2 Adjustment inox shims 6.1x12x0.15 mm x 20 This hardware kit contains the spare conical pin and shims of the Titanium Quick Release System (Q02K).
Hardware Kit F663K/F703K/F753K/F903K/F1003K Flat Head Screws Hex M8x35 x 2 Conical Washers x 2 Hardware kit to connect F663K/F703K/F753K/F903K/F1003K fuselages to mast.
Hardware Kit S325/S355/S375/S380/S395/S425/S430/S450/S480/S483 Flat Head Screws Torx M6x20 x 1 Flat Head Screws Torx M6x16 x 1 Screws to connect S325/S380/S425/S430/S450/S480/S483 stabilizers to fuselage.
Hardware Kit Mast to Rail Boards (2021 RANGE) Track nuts M8 x 4 Button head screws M8x35 and washers x 4 Hardware kit to connect your mast to rail boards.NOT compatible with Kraken Modular System masts
FUSION ALLOY TOP PLATE MKII HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast. Features: Precision CNC machined aircraft grade, anodized 6061-T6 aluminium Incredible torsional stiffness
The rear Stabilizer’s main role is to maintain a level and stable flight path. But conditions and user preference may change what stabilizer angle feels the best (aka the sweet spot). Shimming changes the angle of attack (AOA) and controls the amount of downforce the stabilizer creates on the overall foil system - to increase the stabilizer AOA and front foot pressure, add positive shim. The smallest tweak in the AOA can improve comfort, reduce fatigue, change the cadence of your pump or the turning radius of your carve and increase/decrease your front and rear foot pressure without changing your foot position. With the Sonar Shim Kit you can stack multiple shims, from our base setting it covers from -0.5 to +2.5 degrees. Finetune the way your foil system performs and change the way you ride. You’re in control. 1x -0.5 Deg Shim, 1x 0.5 Deg Shim, 2x 1 Deg Shim Features Stackable to cover -0.5deg to +2.5deg of tuning Instant customisation without removing the Stabilizer Tune for different disciplines and front wings Cost-efficient foil system adjustment
Sabfoil Carbon Rail Plate with Titanium InsertsCP02K/Ti | Carbon Kraken Mast Plate with Titanium InsertsCarbon rail plate for masts of the Kraken Modular System rangeCP02K/Ti preserves all the great features of CP02K, plus all its metal parts are made of titanium, for maximum resistance to corrosion and wear.The weight of the plate has been lowered by over 200g (-30% compared to the aluminum version), thus reducing the overall weight of the mast by about 10% while maintaining all the mechanical properties and robustness of the system.The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T04K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle.CP02K/Ti also allows you to upgrade your set-up with the Titanium Quick Release System (Q02K), thanks to which you can assemble and disassemble your hydrofoil in seconds, without losing the configuration on the board.(TITANIUM QUICK RELEASE SYSTEM) SOLD SEPARATELY
Titanium Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Titanium screws 2 x M8*70 Countersunk 316 grade Torx drive Titanium screws 2 x M8*30 Countersunk 316 grade Torx drive Titanium screws Torx Key for M8* Torx Key for M6* 2 x M6*14 Countersunk 316 grade Torx drive Titanium screws 2 x M6*22 Countersunk 316 grade Torx drive Titanium screws 2 x M6*25 Countersunk 316 grade Torx drive Titanium screws 4 x mast track sliders* 8 x M8 x 25 Countersunk 316 grade Torx drive Titanium screws 4 x M8 x 20 Countersunk 316 grade Torx drive Titanium screws +1 Degree Shim Storage Box *note the torx key and mast track sliders are not titanium
This case is a useful solution for storing main tools. This case is a useful solution for storing main tools. Small in size but large in capacity to keep the most used tools on hand. Dimensions: 250x120x60mm
Hardware Kit S330Y/S370/S376/S399/S400/SRD339/SRD379 Flat Head screws M6x16mm x 2 Screws to connect S330Y/S370/S376/S399/S400 stabilizers to fuselage.
Hardware Kit Conical Washers Conical Washers x 10 Conical washers replacement set for KMS fuselages and aluminum plate P02K.
The F-ONE aluminum mast can be connected to the board with several options. Choose from a 4-bolt top plate, a standard Tuttle head, a KF or a DKF head. All versions are fastened to the mast through a sleeve and a two-bolt system. The Mast Top parts are machined out of solid blocks of 6061 aluminum. The accuracy of the CNC makes sure the geometry of the connection is perfect. Stainless steel inserts are used systematically to preserve the durability of the fastening connections. The Top Plate has become standard on the market and is compatible with any board featuring a Twin-Tracks system. The spacing we use for the four screws is 160×90 mm, but our latest version also features an option for 165×90 mm. The Top Tuttle makes F-ONE foils compatible with all Tuttle boards. The Tuttle format is the original and standard one. A flange has been added around the base of the head to better spread the load through the structure of the board. The KF and DKF heads make current F-ONE foils compatible with kite or SUP foil boards produced previously with these boxes. Refs: 77207-0401 (mast top plate) / 77207-0404 (mast top tuttle) / 77207-0403 (mast top deep kf) / 77207-0402 (mast top kf)
Q01K NOT INCLUDED (KRAKEN QUICK RELEASE) Kraken Mast Plate Kraken Modular System ALL-ROUND Connection SystemKraken Modular System The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T03K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle. This Plate has been designed for maximum lightness and strength. It has been milled directly in our factory starting from premium aluminum ingots and then it has been deeply anodized by certified partners. The Kraken Mast Plate also makes it possible to upgrade your set-up with the quick release system (Q01K), thanks to which you can assemble and disassemble your hydrofoil in a few seconds, without losing the configuration on the board.
Titanium Quick Release SystemTitanium Quick Release System for Kraken MastsKraken Modular System - PATENTEDThanks to this upgrade you can leave your plate or tuttle connected to the board and mount the rest of the hydrofoil in a few seconds through a single conical screw, with a few turns of the key and without losing each time your setup on the board itself.For the first use, you will have to assemble the Quick Release System on your Kraken Mast, then you can forget about it and enjoy its advantages, making the most of your time.With this second version made of titanium, the Quick Release System module has been improved not only in materials, but also in design, to ensure maximum lightness, functionality, and resistance to corrosion and wear.The Kraken Quick Release System has been patented by SABFOIL.Q02K is only compatible with the following board connection systems: CP02K, CP02K/Ti, T04K
Hardware Kit FS710/FW900/FW1010 Socket head cap screw M6 x 25mm and washers x 2 Screws to connect FS710/FW1010/FW1050-F/FW900 fuselages to mast.