Accessoires de foil – Réglages fins, connexion et protection
Hardware Kit M6 to M8 Screws Adapters Washers adapter from M8 to M6 x 3 For connecting M6 screws in M8 holes.
Lithium Grease (75 ml)High-quality lubricating grease based on lithium soaps.Particularly resistant to water, does not dirty, lubricates and protects any type of mechanical coupling from corrosion and wear. Indispensable for nautical uses.The package contains 75 ml of lithium grease.
These six shims can change the incidence angle of your stabilizer for -0,5°/-1°/-1,5°/-2°/-2,5°/-3° degrees
Hardware Kit Carbon Plate to Rail Board Flat Head Screws Hex M8x30 x 4 Truck Nuts M8 x 4 Hardware Kit to connect your carbon plate CP02K to Rail Boards (Kraken Modular System).
Torx T40 Torx T40 tool compatible with all Sonar Foil screws Features Manufactured from high quality Chromium-vanadium steel Comfortable anti-slip ergonomic T-handle Dual-ended design for fast assembly and higher torque To extend longevity wash with fresh water and dry after use*
Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"
The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.
The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws
Spare Titanium Pin and Shims for Q02K Titanium Pin x 1 Default inox shims 6.1x14x0.5 mm x 2 Adjustment inox shims 6.1x12x0.15 mm x 20 This hardware kit contains the spare conical pin and shims of the Titanium Quick Release System (Q02K).
Hardware Kit F663K/F703K/F753K/F903K/F1003K Flat Head Screws Hex M8x35 x 2 Conical Washers x 2 Hardware kit to connect F663K/F703K/F753K/F903K/F1003K fuselages to mast.
Lockable T-Nuts are specifically designed for riders looking to save time during setup and maintain stable, precise settings. This ingenious, minimalist system makes it easy to lock the screws into the Twin-Tracks, guaranteeing optimized, fast and efficient assembly. As well as insuring fixed settings, this system prevents the loss of the T-Nuts during assembly or handling. Only one tool is required (Torx wrench), and an included template helps you place the T-Nuts perfectly from the outset.
Hardware Kit Mast to Rail Boards (2021 RANGE) Track nuts M8 x 4 Button head screws M8x35 and washers x 4 Hardware kit to connect your mast to rail boards.NOT compatible with Kraken Modular System masts
FUSION ALLOY TOP PLATE MKII HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast. Features: Precision CNC machined aircraft grade, anodized 6061-T6 aluminium Incredible torsional stiffness
Hardware Kit S325/S355/S375/S380/S395/S425/S430/S450/S480/S483 Flat Head Screws Torx M6x20 x 1 Flat Head Screws Torx M6x16 x 1 Screws to connect S325/S380/S425/S430/S450/S480/S483 stabilizers to fuselage.
The rear Stabilizer’s main role is to maintain a level and stable flight path. But conditions and user preference may change what stabilizer angle feels the best (aka the sweet spot). Shimming changes the angle of attack (AOA) and controls the amount of downforce the stabilizer creates on the overall foil system - to increase the stabilizer AOA and front foot pressure, add positive shim. The smallest tweak in the AOA can improve comfort, reduce fatigue, change the cadence of your pump or the turning radius of your carve and increase/decrease your front and rear foot pressure without changing your foot position. With the Sonar Shim Kit you can stack multiple shims, from our base setting it covers from -0.5 to +2.5 degrees. Finetune the way your foil system performs and change the way you ride. You’re in control. 1x -0.5 Deg Shim, 1x 0.5 Deg Shim, 2x 1 Deg Shim Features Stackable to cover -0.5deg to +2.5deg of tuning Instant customisation without removing the Stabilizer Tune for different disciplines and front wings Cost-efficient foil system adjustment
Titanium Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Titanium screws 2 x M8*70 Countersunk 316 grade Torx drive Titanium screws 2 x M8*30 Countersunk 316 grade Torx drive Titanium screws Torx Key for M8* Torx Key for M6* 2 x M6*14 Countersunk 316 grade Torx drive Titanium screws 2 x M6*22 Countersunk 316 grade Torx drive Titanium screws 2 x M6*25 Countersunk 316 grade Torx drive Titanium screws 4 x mast track sliders* 8 x M8 x 25 Countersunk 316 grade Torx drive Titanium screws 4 x M8 x 20 Countersunk 316 grade Torx drive Titanium screws +1 Degree Shim Storage Box *note the torx key and mast track sliders are not titanium
This case is a useful solution for storing main tools. This case is a useful solution for storing main tools. Small in size but large in capacity to keep the most used tools on hand. Dimensions: 250x120x60mm
Hardware Kit S330Y/S370/S376/S399/S400/SRD339/SRD379 Flat Head screws M6x16mm x 2 Screws to connect S330Y/S370/S376/S399/S400 stabilizers to fuselage.
Hardware Kit for Quick Mounting System T-nuts for plate x 4 Button head screws M8x35mm x 4Flat head screws M4x25mm x 4 Washers Ø16XØ8.40X1.4 x 4 The Quick Mounting System MHW055 allows to assemble and disassemble the mast very easily, keeping the nuts always in the same correct positionThis package contains the hardware replacement parts required for the Quick Mounting System.
Q01K NOT INCLUDED (KRAKEN QUICK RELEASE) Kraken Mast Plate Kraken Modular System ALL-ROUND Connection SystemKraken Modular System The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T03K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle. This Plate has been designed for maximum lightness and strength. It has been milled directly in our factory starting from premium aluminum ingots and then it has been deeply anodized by certified partners. The Kraken Mast Plate also makes it possible to upgrade your set-up with the quick release system (Q01K), thanks to which you can assemble and disassemble your hydrofoil in a few seconds, without losing the configuration on the board.
Sabfoil Carbon Rail Plate with Titanium InsertsCP02K/Ti | Carbon Kraken Mast Plate with Titanium InsertsCarbon rail plate for masts of the Kraken Modular System rangeCP02K/Ti preserves all the great features of CP02K, plus all its metal parts are made of titanium, for maximum resistance to corrosion and wear.The weight of the plate has been lowered by over 200g (-30% compared to the aluminum version), thus reducing the overall weight of the mast by about 10% while maintaining all the mechanical properties and robustness of the system.The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T04K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle.CP02K/Ti also allows you to upgrade your set-up with the Titanium Quick Release System (Q02K), thanks to which you can assemble and disassemble your hydrofoil in seconds, without losing the configuration on the board.(TITANIUM QUICK RELEASE SYSTEM) SOLD SEPARATELY
Adaptor for Small Chord Stabilizers - 0°Adaptor for Small Chord Stabilizers (S376, S399, S400).
Allen Keys, Torx Keys and Lithium GreaseAllen Key 3mm x 1Allen Key 5mm x 1Torx Key 3mm x 1Lithium Grease x 1Hexagonal Allen Key 6mm x 1Set of keys and lithium grease for the assembly and maintenance of your hydrofoil kit.
Hardware Kit Conical Washers Conical Washers x 10 Conical washers replacement set for KMS fuselages and aluminum plate P02K.