Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"  

The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.

The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 750mm mast is mostly used on bigger surf, downwinders and more advanced riding or as a surfy option for kite foiling. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our 19mm masts are 224% stiffer than the 15mm thick masts (most other foil companies use). It's even stiffer than any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. Do you find the 750mmm just a bit too short for your local spot, but the 900mm is a bit too long? Then the 820mm is certainly the right length for you. Perfect for higher performance riding on Surf, tow-in, Wake, Pump, SUP, Wing or Kite.  Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

Titanium Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Titanium screws 2 x M8*70 Countersunk 316 grade Torx drive Titanium screws 2 x M8*30 Countersunk 316 grade Torx drive Titanium screws Torx Key for M8* Torx Key for M6* 2 x M6*14 Countersunk 316 grade Torx drive Titanium screws 2 x M6*22 Countersunk 316 grade Torx drive Titanium screws 2 x M6*25 Countersunk 316 grade Torx drive Titanium screws 4 x mast track sliders* 8 x M8 x 25 Countersunk 316 grade Torx drive Titanium screws 4 x M8 x 20 Countersunk 316 grade Torx drive Titanium screws +1 Degree Shim Storage Box *note the torx key and mast track sliders are not titanium

The AXIS Red Standard Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 765mm long. Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling. Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts   Available in multiple sizes for different types of riding. (the longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning)

Set Includes: Front Wing - 1150 - PNG - Carbon 1150mm x 180mm / 1778cm² / High Aspect 475 Carbon Rear Hydrofoil wing 475 mm x 68mm  S-Series - Fuselage - Standard Length - 765mm 765mm 19mm - AXIS K/S-Series Freeride Foil Mast 75cm 75cm / 29.53" Fuselage to 19mm Mast Adapter / Doodad To Fit 19mm Mast 19mm K/S-Series Foil Base Plate To Fit 19mm Mast One STAINLESS Screwset and Toolset for All Black Series, S-Series Stainless - Standard PUMP AND GLIDE Our ultimate pump and glide wing series. There’s no other wing like the Pump and Glide. A unique combination of medium and high aspect, thinner foil and high camber, PNG gets you up easily – then keeps you going, and going, and going. The foil section design also has a high stall angle, which means it performs exceptionally at slower speeds.Dock foilers need look no further. This is your foil.PNG is a firm favourite with SUP foilers too, maximising your ability to pump back out and foil straight onto the next wave. Lots of our AXIS customers have also learned to wing foil on this design. However, the same characteristics that make it a great pumping foil will also hold back its top speed.              

When we started designing our next generation wing collection, we realized that the 2021 high performance wings required their own style fuselage. We felt that whoever wants to ride fast, wouldn't want to compromise on the wing design and fairing of their high performance wings, just to have them compatible with their existing fuselages.  Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts Additionally, you will need the stainless steel or titanium screw set to use the new AXIS Foils Black fuselages.Higher performance foil sections with lower camber, different profile, and narrower chord, have resulted to thinner wings, where the connection to the fuselage is smaller.  The Black fuselage accommodates the HPS and the smaller BSC wings, giving the right connection and rigidity to these faster foil sections.The length of the Black fuselage is modified to position the front wings to the perfect spot for each size fuselage Only compatible with the certain front wings. All rear wings and masts are compatible with the Black fuselages. Available in multiple sizes for different types of riding. (The longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning) Black Crazyshort 603mm FuselageBlack Ultrashort 643mm FuselageBlack Short 703mm FuselageBlack Standard 784mm FuselageBlack Windsurf 899mm Fuselage

The AXIS Red Ultrashort Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 625mm long. Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling.  Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts Available in multiple sizes for different types of riding. (the longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning

AXIS Pump & Glide Full Set – PNGv2 1200 + Progressive 350 + Black ADVANCE+ Ultrashort This complete AXIS foil package is built for pump foiling, dock starts, flatwater gliding, wake riding, and micro-bump surfing. Everything you need is included, fully compatible and ready to assemble. The set includes: AXIS PNGv2 1200 Front Wing (Ultra High Mod Reinforced Carbon) AXIS Progressive 350 Rear Wing (Carbon) AXIS Black ADVANCE+ Ultrashort Fuselage with integrated Zinc Anode AXIS 19mm K/S-Series Freeride Mast – 75cm AXIS Fuselage-to-Mast Adapter (“Doodad”) for 19mm masts AXIS 19mm K/S-Series Base Plate Full stainless screw and Torx tool set (all screws pre-lubed, ready to ride) Overview This setup centers around the PNGv2 1200, one of the most effective wings on the market for efficient pumping and extended glide. With a massive surface area and compact wingspan, it delivers instant lift, forgiving balance, and a smooth pumping cadence—ideal for dock starts, wake riding, and progressing your technique on flat water or tiny bumps. The Progressive 350 rear wing brings fluid turning and intuitive roll control, making carving, linking pumps, and directional transitions feel natural and balanced. To enhance responsiveness and surf-style control, the Black ADVANCE+ Ultrashort fuselage moves the mast 60mm closer to the front wing. This creates a more connected and lively feel under your feet, with tighter turning and improved feedback during pumping. The integrated Zinc Anode protects the connection from corrosion. The 19mm Freeride Mast, Base Plate, and Doodad ensure a stiff, secure, and reliable connection across the entire foil system. Primary Purpose This set is optimized for: Pump foiling Dock starts Flatwater cruising Wake foiling behind boats Micro-bump and small-wave SUP foiling Flowy, surf-style pump riding It can be used for wing foiling in very light winds, but its real strength is pump and glide efficiency. Component Highlights PNGv2 1200 Front Wing Successor to the PNG 1150 with FIREBALL foil section Huge lift and long glide with a compact 1200 mm span Ideal for dock starts, pump lines, wake riding, and micro bumps Progressive 350 Rear Wing Medium aspect, thin foil, subtle downturn Smooth, controlled carving with fast acceleration Designed for intermediate to advanced progression Black ADVANCE+ Ultrashort Fuselage Mast position moved 60mm forward for a more surf-connected feel Looser carving and more dynamic pumping response Integrated Zinc Anode for long-term durability 19mm K/S-Series Mast, Base Plate & Doodad Stiff, reliable, and secure mast system CNC machined base plate with easy-removal slot design Adapter ensures perfect fit between mast and fuselage Who This Set Is For This is a premium choice for riders who want: Effortless pumping with long glide phases Reliable dock start performance Smooth, intuitive carving Confidence while progressing technique If your goal is to pump further, link longer lines, and ride when the water looks “too flat to foil”, this is the set.

NEW for the Black Advance+ Series we have added a discretely placed Zinc Anode, which we have integrated into the front wing attachment area.All AXIS Black Advance+ Fuselage have updated shapes and are now shipped with all the screws you need to attach your favorite wings and mast. These are pre-lubed, ready to ride straight out of the bag.If you're into pushing the envelope in wave riding (Prone, SUP, Wing or Wake) these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected surf experience? Our new Black ADVANCE+ fuselage configuration is for you. This design sees the mast position advanced 60mm closer to the front foil (compared to our regular fuselages), opening up entirely new options for surf performance. Our Current Black fuselage range is perfectly suited to the majority of riders across all disciplines, while these new Black ADVANCE+ fuselages are not intended to replace them but provide options for performance and a more connected feel when pushing the limits. If you are an intermediate or expert surf / wave foiler, this could be a great upgrade for you. A consideration when moving the mast position on the fuselage forward is that the effective length of the rear fuselage back to the rear stabilizing foil is increased by the distance the mast moves forward. When choosing your Advance Black Fuselage, it’s advisable to take this into consideration and perhaps opt for a length shorter than you are used to using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead. Available in Short, Ultrashort, Crazyshort and Sillyshort  and Psychoshort (just 520mm). Compared to our Standard Black fuselage range, the Advance+ provide a looser, faster transition from side-to-side. The sensation our testers liked it for is similar to the sensation of moving fins forward in the tracks on a surfboard, initiating turns becomes easier, which is great in the surf. There is a small trade-off, this ease of turning comes as at the expense of some tracking and speed stability. (So expect to have a small effect on upwind ability when winging and a need to adjust pumping technique slightly. If you are into ultra high speed big wave riding, you should consider the regular black fuselages instead).With the mast set further forward on the fuselage, your baseplate position needs to be further forward in the boxes to position the wings in the same position as the normal Black fuselageIn an effort to reduce our cardboard footprint, these new Black ADVANCE+ fuselages come with our new custom fuselage protective covers, and no paper / cardboard boxes. 

The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear stabilisers to maximise this newfound speed advantage. With minimal span changes (just 7mm between them) and drastic chord reduction down to 55, 50, 45, 40 and 35mm, we found positive gains in speed, control, balance and feel. The Skinnies have inherited many of the same characterises that make our Progressive range so popular, like the precise feel and seamless turn initiation plus recovery. They are very low drag and free up speed and turning. Heavier riders and those less experienced will gravitate to the 55, 50 and 45 chord models, those who are lighter and or have greater experience might opt to reduce drag in the extreme and try the 40 or 35mm chord options.The Skinny rear wings inspire confidence by providing a more comfortable ride at speed, they reduce the normal buildup of front foot pressure that can be associated with high-speed foiling. They are a perfect match to ARTPRO foils, but keep in mind, your HPS, ART, PNG and even BSC, will equally benefit from the Skinny high-performance DNA.

When we started designing our next generation wing collection, we realized that the 2021 high performance wings required their own style fuselage. We felt that whoever wants to ride fast, wouldn't want to compromise on the wing design and fairing of their high performance wings, just to have them compatible with their existing fuselages.  Ultrashort is 643mm long Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts Additionally, you will need the stainless steel or titanium screw set to use the new AXIS Foils Black fuselages.Higher performance foil sections with lower camber, different profile, and narrower chord, have resulted to thinner wings, where the connection to the fuselage is smaller.  The Black fuselage accommodates the HPS and the smaller BSC wings, giving the right connection and rigidity to these faster foil sections.The length of the Black fuselage is modified to position the front wings to the perfect spot for each size fuselage Only compatible with the certain front wings. All rear wings and masts are compatible with the Black fuselages. Available in multiple sizes for different types of riding. (The longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning) Black Crazyshort 603mm FuselageBlack Ultrashort 643mm FuselageBlack Short 703mm FuselageBlack Standard 784mm FuselageBlack Windsurf 899mm Fuselage

The Broad Spectrum Carve (BSC) wings are a new direction into easy to ride wings, with good amount of performance embedded to the design. Perfect for all round riding including entry level riders. The larger sizes are ideal for PUMPING, SUP, WINGING, WAKE. As we go down on sizing, 890-810-740 are high performance PRONE, WINGING and KITE wings. For the BSC wings we use a refined foil section, with extensive speed range, and stability. This makes the BSC wings ideal for all levels of riders and conditions. The 890 / 810 / 740 sizes are designed for performance PRONE, WINGING and KITE foiling. These wings are stable, fast and turn on a dime. The 1120 and 1060 are the easiest wings for all levels, heavier riders and all rounders for WING, SUP, WAKE and PUMP. Very early lift, butter smooth riding, good speed range, and great turning for their size. The 970 could be the all levels wing for all styles and levels of riding. The 890-810-740 are faster, more technical wings, designed for the skilled SUP, PRONE, WINGING riders who are looking for higher performance in a very easy to ride package. As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil. Compatible with the Red fuselages.  AXIS BSC 1060 Carbon Wing Technical Data: WINGSPAN: 1060 mm / 42 inches MAX CHORD: 200mm / 8 inches ASPECT RATIO: 6.51 ACTUAL AREA 1803 square cm / 278 square inches PROJECTED AREA: 1726 square cm / 268 square inches VOLUME: 2800 cubic cm / 171 cubic inches Recommended use: WING Surfing for all levels and medium + conditions. Super stable for the size Downwinding - Medium+ conditions and intermediate+ level SUP / Surf - Medium+ conditions and intermediate level Wake foiling - Intermediate+ level Pump foiling - Intermediate+ level Windsurf foiling - Intermediate+ level Kite foiling - Ideal for all styles, levels and conditions Here is what the experts say: The BSC wings are incredibly easy to ride. Bigger sizes ideal for lighter days and bigger dudes. Smaller sizes more surfy and faster. Medium AR makes them a bit slower but still faster than last years all rounds.    Rear Wing Options: 500mm Carbon for max control, stability and slower ride (entry levels) 460mm Carbon for high speed and loose turning (advanced) 420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.  440mm Carbon for control and stability (all levels) 400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate) 390mm Carbon for Wing and Surf with good turning control and additional glide 370mm Carbon for loose feel and fast turning, with less stability (intermediate). The rear wing that does it all  340mm Carbon for even looser feel and even less drag and more speed. (advanced) 500mm Anhedral Carbon specific to windsurf foiling   When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage. 

The AXIS 460 Rear wing is our fastest rear wing, and the perfect companion to the 900, 1000 and 1010 front wings. Its flat profile, 60mm chord and foil section, make the 460 Carbon Rear Wing ideal for high performance downwinding. Many of our team riders also use the 460 for SUP, SURF, Wake and Pump foiling! A great high performance rear wing for multiple uses.  When you purchase the AXIS 460 carbon rear wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.  WINGSPAN: 460 mm / 18.11 in  CHORD: 60 mm / 2.36 in ASPECT RATIO: 9.45 ACTUAL AREA : 227.2 cm² / 35.22 IN²  PROJECTED AREA: 223.87 cm² / 34.70 IN²  VOLUME: 81.39 cm³ / 4.97 IN³ 

The AXIS Progressive Rear Wings are perfectly paired with our HPS, ART, BSC and PNG wings. Mostly flat but with a very subtle downturn, these wings combine excellent speed with sensational turning. Who are the AXIS Progressive rear wings for?The AXIS Progressive rear wings are all round wings for intermediate and advanced riders paired with higher performance front wings such as HPS, ART, PNG and BSC front wings. You notice the difference in your first carve or gybe. Why did we design the AXIS Progressive rear wings?We got super hooked on the locked in, fast, stable feel of the AXIS Speed 380/60 and 420/60 rear wings, and still are for flat water blasting and racing for winging and big, fast waves for foil surfing. But we had a feeling we still had more to give our riders in the turning department. After several iterations and tweaks, the new Progressive rears have delivered it in spades.Medium aspect, with a thin foil section and subtle turned down tips, this new design rolls into the turn beautifully, feels fluid and loose, and also grips through the carve and transitions back out the other side with predictable control and positive acceleration. Even intermediate foilers will notice the difference straight away. It’s super well-behaved in rough winging conditions (just set and forget) and with the thin foil section, it’s still rewardingly quick. The Progressive rear wings will feel like a natural extension of your feet.Riders are finding the Progressive rears pair beautifully with our AXIS ART and AXIS HPS high aspect front wings, and they’ll work very well with any foil for riders looking to improve their turns and carves. As always, size your Progressive rear wing to your experience and front wing size. (larger sizes for less experienced riders and larger front wing pairings) We obsess over rear wings, almost to the point that it’s a problem. We’ve tried to get professional help but the prototypes just keep getting churned out by our design team on a weekly basis, and we can’t help but test, analyze, pontificate, redesign – and on and on it goes. You may be thinking – why do rear wings matter? Aren’t they just stabilizers to balance the front wing? Well that’s what many thought too – in the very early days. We know that your rear wing can change your life. Okay that’s not quite true, but it will significantly affect the ride characteristics of your whole foil set up.  Try the AXIS Progressive rear wings and you will immediately know what we are talking about. 

The AXIS Red Short Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 680mm long. Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling.  Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts Available in multiple sizes for different types of riding. (the longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning)

The original PNG 1300, introduced in 2020, was a groundbreaking foil, with its impressive 1300mm wingspan and a high aspect ratio of 9.94; a foil that is not only large in surface area but also remarkably efficient and fast; a foil way ahead of its time and extremely popular in the recent seasons.The advent of the downwind foiling discipline saw the PNG 1300 become the go-to foil for beginners entering the challenging world of downwind. Its exceptionally low stall speed enables early take-off, while impressive glide, acceleration and controlled speed has allowed riders to connect bumps and maintain momentum in weak to moderate swell and wind conditions. Its intuitive pumping characteristics make it easy to recover from mistakes and navigate, even if you’re not yet skilled in the art of finding the perfect line to link the bumps.When developing the AXIS PNG 1300v2, we were determined not to compromise on any of these outstanding features. We have succeeded in enhancing every detail and adding a few more you wouldn’t imagine possible on a wing of this size.The completely reimagined new PNG 1300v2 now runs on our Black fuselage series (we recommend our latest Black Advance+ range).The AXIS PNG 1300v2 boasts low stall speeds, lower drag, better acceleration, better turning and a significantly higher top-end speed –  thanks to its finely tuned High Camber (High-lift) / Low-drag foil section.The PNG 1300v2 has reduced surface area (1632 sq cm) compared to the previous PNG 1300 (1712 sq cm), but with the addition of its new foil section, it achieves the same capacity for early lift.Vastly improved turning and a balanced lift distribution ensure a smooth, stable and comfortable ride, with predictable pitch control that makes navigating between bumps and pumping a breeze.This stability is crucial for light wind or novice downwinders, offering a more agile manoeuvrable experience than the original PNG 1300. We’ve also extended its glide range, for unlocking new distances and manoeuvres when pumping flat water. You’ll be amazed at how much further you can glide between pumps without losing speed or height.All these features make the AXIS PNG 1300v2 an amazing addition for dock starters, of all levels. The lower drag, improved glide and reduced stall speed are fantastic for those who are progressing and have found that the bigger slow wings are just not much fun anymore.Use the PNG 1300v2 for SUP/Prone surfing when in smaller or lower energy surf. The amount of lift that the wing creates to get you moving and stay up on micro-waves is astounding.And let’s not forget that the AXIS PNG 1300v2 transforms what’s possible for some of the lightest winds while winging. The new AXIS PNG 1300v2 will get you flying before others and start enjoying again ultra light wind winging.

AXIS Spitfire Wingfoil Full Set – 82cm / Black ADVANCE+ / Progressive & Skinny Rear Wing Options This full AXIS Wingfoil setup is built for riders who want a surf-inspired, fluid turning style with a foil that feels natural underfoot and responds instantly. At the core of the set is the AXIS Spitfire front wing line – known for its distinctive elliptical outline, predictable lift, smooth carving behavior, and effortless control when the foil breaches. Paired with the Black ADVANCE+ Ultrashort fuselage, the foil delivers a tighter, more connected surf feel, enabling faster rail-to-rail transitions and more intuitive maneuvering. The 82cm 19mm K/S-Series Mast provides the stiffness, leverage and clearance ideal for wingfoiling in a wide range of conditions. The included Progressive or Skinny rear wings match each Spitfire front wing for balanced pitch stability, speed, carving response and pumping efficiency. This is a complete, ready-to-foil set — all screws, tools and adapter components are included. What’s Included in Every Set AXIS Spitfire Front Wing (size version below) AXIS Rear Wing matched to the chosen front wing (versions below) AXIS Black ADVANCE+ Fuselage – Ultrashort 640mm with integrated Zinc Anode AXIS 19mm K/S-Series Aluminium Mast – 82cm AXIS 19mm Mast Base Plate (Double US Box compatible) AXIS Doodad Mast-to-Fuselage Adapter AXIS Stainless Steel Screw & Tool Set (all required hardware included) Choose Your Setup 1) Spitfire 840 Set — Advanced Freestyle Surf Feel (Rider 60–78 kg) Includes: Spitfire 840 Front Wing Skinny Rear Wing 365/55 The Spitfire 840 delivers fast, lively turning with a loose, surf-style ride. It encourages aggressive carving, tight transitions and confident breaches. This setup is ideal for advanced riders, freestyle wingfoiling, and high-energy surf foil sessions where responsiveness and fast direction changes matter. The Skinny 365 rear wing reduces drag and unlocks extra speed and snap while maintaining enough stability to stay connected in the pocket. Light, precise, and built for riders who want explosive turning and playful control. 2) Spitfire 900 Set — Advanced Freeride / Freestyle Balance (Rider 75–90 kg) Includes: Spitfire 900 Front Wing Progressive Rear Wing 300/61 The Spitfire 900 keeps the smooth carving DNA of the Spitfire design, but with slightly more glide and stability. A great match for advanced freeride and freestyle wingfoilers, this size offers a wide usable speed range, predictable lift, and confidence when pushing harder into turns. The Progressive 300 rear wing provides excellent control and grip through carving transitions, while keeping things fast and responsive. Ideal if you want versatility with high performance surf handling. 3) Spitfire 960 Set — Freeride Surf Flow with Added Glide (Rider 80–95 kg) Includes: Spitfire 960 Front Wing Progressive Rear Wing 325 The Spitfire 960 is the choice for riders who want a smooth, confidence-building ride with extra low-speed stability and glide. It lifts early, stays composed in messy water and handles breaches gracefully. Perfect for freeride wingfoiling, flowing surf lines, and relaxed but capable maneuvering. Matched with the Progressive 325 rear wing, the foil rolls into turns easily and exits predictably, offering a natural, fluid riding sensation. This setup is for riders who want to foil longer, easier, and with more flow. Who This Set Is For Riders who want surf-style turning, intuitive control and predictable lift Wingfoilers who value carving lines, fluid rail-to-rail transitions and breach-safe foiling Intermediate progressing into advanced or already high-level surf & freestyle riders Anyone who wants a complete performance setup, ready to assemble and ride

Surf Skinny Rear Wings – Control at Competition SpeedWhen every second on the water counts, Surf Skinny delivers. These small rear wings are tuned for intermediate and advanced wave riders across prone, SUP and wing, offering a setup built for control at speed. They take the unmatched glide of our Skinny Rears and combine it with the roll stability of our Progressives, giving riders a series designed for the surf – fast, fluid and responsive, with the confidence to push harder without losing connection to the wave.The key is yaw control. Surf Skinny rear wings let you fade, adjust and redirect with pinpoint precision. Don’t be fooled by their size – these wings deliver big on handling and responsiveness, already proven in competition at the highest levels.Surf Skinny wings are built for speed, but refined enough to feel natural from the very first ride. They’re made to give you the freedom to surf with accuracy, power and expression, all while maintaining total command of your foil.

NEW for the Black Advance+ Series we have added a discretely placed Zinc Anode, which we have integrated into the front wing attachment area.All AXIS Black Advance+ Fuselage have updated shapes and are now shipped with all the screws you need to attach your favorite wings and mast. These are pre-lubed, ready to ride straight out of the bag.If you're into pushing the envelope in wave riding (Prone, SUP, Wing or Wake) these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected surf experience? Our new Black ADVANCE+ fuselage configuration is for you. This design sees the mast position advanced 60mm closer to the front foil (compared to our regular fuselages), opening up entirely new options for surf performance. Our Current Black fuselage range is perfectly suited to the majority of riders across all disciplines, while these new Black ADVANCE+ fuselages are not intended to replace them but provide options for performance and a more connected feel when pushing the limits. If you are an intermediate or expert surf / wave foiler, this could be a great upgrade for you. A consideration when moving the mast position on the fuselage forward is that the effective length of the rear fuselage back to the rear stabilizing foil is increased by the distance the mast moves forward. When choosing your Advance Black Fuselage, it’s advisable to take this into consideration and perhaps opt for a length shorter than you are used to using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead. Available in Short, Ultrashort, Crazyshort and Sillyshort  and Psychoshort (just 520mm). Compared to our Standard Black fuselage range, the Advance+ provide a looser, faster transition from side-to-side. The sensation our testers liked it for is similar to the sensation of moving fins forward in the tracks on a surfboard, initiating turns becomes easier, which is great in the surf. There is a small trade-off, this ease of turning comes as at the expense of some tracking and speed stability. (So expect to have a small effect on upwind ability when winging and a need to adjust pumping technique slightly. If you are into ultra high speed big wave riding, you should consider the regular black fuselages instead).With the mast set further forward on the fuselage, your baseplate position needs to be further forward in the boxes to position the wings in the same position as the normal Black fuselageIn an effort to reduce our cardboard footprint, these new Black ADVANCE+ fuselages come with our new custom fuselage protective covers, and no paper / cardboard boxes. 

NEW for the Black Advance+ Series we have added a discretely placed Zinc Anode, which we have integrated into the front wing attachment area.All AXIS Black Advance+ Fuselage have updated shapes and are now shipped with all the screws you need to attach your favorite wings and mast. These are pre-lubed, ready to ride straight out of the bag.If you're into pushing the envelope in wave riding (Prone, SUP, Wing or Wake) these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected surf experience? Our new Black ADVANCE+ fuselage configuration is for you. This design sees the mast position advanced 60mm closer to the front foil (compared to our regular fuselages), opening up entirely new options for surf performance. Our Current Black fuselage range is perfectly suited to the majority of riders across all disciplines, while these new Black ADVANCE+ fuselages are not intended to replace them but provide options for performance and a more connected feel when pushing the limits. If you are an intermediate or expert surf / wave foiler, this could be a great upgrade for you. A consideration when moving the mast position on the fuselage forward is that the effective length of the rear fuselage back to the rear stabilizing foil is increased by the distance the mast moves forward. When choosing your Advance Black Fuselage, it’s advisable to take this into consideration and perhaps opt for a length shorter than you are used to using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead. Available in Short, Ultrashort, Crazyshort and Sillyshort  and Psychoshort (just 520mm). Compared to our Standard Black fuselage range, the Advance+ provide a looser, faster transition from side-to-side. The sensation our testers liked it for is similar to the sensation of moving fins forward in the tracks on a surfboard, initiating turns becomes easier, which is great in the surf. There is a small trade-off, this ease of turning comes as at the expense of some tracking and speed stability. (So expect to have a small effect on upwind ability when winging and a need to adjust pumping technique slightly. If you are into ultra high speed big wave riding, you should consider the regular black fuselages instead).With the mast set further forward on the fuselage, your baseplate position needs to be further forward in the boxes to position the wings in the same position as the normal Black fuselageIn an effort to reduce our cardboard footprint, these new Black ADVANCE+ fuselages come with our new custom fuselage protective covers, and no paper / cardboard boxes. 

Whether winging at speed, laying deep carves on a wave face or pumping and linking up swells on a downwinder – AXIS Power Carbon enters a new realm of control and connection between board and foil. It’s the next giant leap in foiling performance. High aspect foils = higher loads on mastsDuring early ART foil testing, our research team quickly realized that higher aspect ratios and broader foil spans applied more bending and twisting forces to the mast. So while ART foils were a game-changer even on our existing masts, we knew there was still huge untapped potential to be realized.And so began a whole new development project, and we couldn’t be more excited at the result. With a new power profile and carefully considered material selection and placement, AXIS Power Carbon delivers both superior stiffness with next-level strength.Opting for a one-piece design, we avoided the flow/drag and jointing issues associated with multi-part mast constructions.Additionally and more importantly, testing proves that maximum loading is concentrated close to the baseplate and this is why the mast tapers thicker at this point to handle the loads. Any joins or two-piece construction at this high load area would destroy the integrity of the mast. A revised fuselage connection design maximizes the size of the attachment point to achieve a perfect fit to the fuselage reducing any chance of unwanted movement.The result is a positive connected feel, direct drive, immediate feedback and ultimate control. High aspect foils perform as they should, feel and control enter an entirely new realm. The new High Modulus Carbon fibre used in our mast layup is considerably stiffer and stronger than the regular carbon fibre used in conventional constructions. Innovative, considered and balanced placement of materials in our proprietary production process paired with rigorous testing has delivered a breathtaking performance leap.Ride characteristics are so game-changing, that it’s been a struggle to get our team riders to return the prototypes after testing!Feedback featured claims like ‘a way more positive and connected feel’, ‘immediate feedback’ and ‘ultimate control’.Choose your Power levelOur new masts are available in two models, the Power Carbon and Power Carbon - High Modulus, the latter providing additional strength and 35% more bend resistance than our industry-leading 19mm aluminium mast. The High Modulus will be the mast of choice for the most discerning rider seeking ultimate performance, and heavier riders using our larger span foils.With AXIS Power Carbon masts, riders will finally be at one with the foil.AXIS Power Carbon Masts have a new and greatly improved base connection design. While fully compatible with all existing Red & Black fuselage, a new installation technique/method is required, this involves simply inserting the mast leading edge first into the fuselage opening, then rotating the trailing edge down. Removal is done in reverse, trailing edge rotates out first... super simple!Remember use only 30mm M8 bolts to attach fuselage to Power Carbon masts