SLINGSHOT Hope Craft V3

HIGH MODULUS CARBON / STIFF / HIGH END Regular priceThe HM Carbon Mast line is designed for those who prioritize stiffness above all else. Just as stiff suspension enhances the responsiveness of a sports car, this mast delivers unparalleled direct feedback on the water, allowing for quicker reactions and greater control. Riders seeking this level of precision will find the One-Lock HM Mast exceeds their expectations by improving their carving, tacking, speed, and glide. INCLUDED: One-Lock HM Carbon Mast, Protective Cover, RTS Kit DESIGN DIFFERENCE The One-Lock HM Carbon Mast is among the stiffest on the market, offering exceptional rigidity in both longitudinal bending and torsion. Constructed with High Modulus Carbon and a hollow core, the design optimizes carbon placement for maximum strength and stiffness. The mast’s chord tapers from 118mm at the foot to 145mm at the base, achieving a perfect balance between efficiency and stiffness. This combination delivers the most direct and precise feedback in the industry. At the mast’s foot, our optimized One-Lock collar enhances efficiency and minimizes drag by ensuring smooth water flow from the front wing to the stabilizer, all while holding true to our durability standards. The mast also includes our RTS foil board mounting kit, which dramatically simplifies setup. Once the mast’s position is set, you can fully assemble and disassemble your foil in under 30 seconds, without the need for tools.

Fast / Maneuverable / StableOur One-Lock Kite Front Wings are designed to elevate your kite foiling experience, no matter your skill level. From control and stability to unmatched speed and precision, these wings cater to every rider’s progression. With innovative designs and advanced materials, the 1255, 855, and 755 wings deliver optimal performance across all conditions. INCLUDED: One-Lock Kite Front Wing, Protective Cover, Replacement One-Lock Latch Kit

SNAP / HOLD / SPEEDThe 200 Tail is designed for riders looking to boost their stabilizer’s performance by reducing lift and enhancing tail lock. While it may not suit every rider, this stabilizer improves upwind angle and unlocks pitch in a way that introduces a new level of powered riding. INCLUDED:  One-Lock Carve Tail 200, Protective CoverThe One-Lock Carve Tail 200 is our fastest stabilizer. With a preset angle of -1.5°, it’s perfectly tuned for minimal drag. Combined with its large upturned wingtips, the Carve 200 locks in at high speeds without increasing lift. When carving, this stabilizer is highly responsive in roll and pitch, making high-speed turns its specialty. Much like larger fins on a surfboard, the wingtips of the Carve 200 hold firm when pushed into a turn, ensuring no tail slip.

Our new V-STRAPS have been specifically designed for foilboards. The shape and material have been selected to bring maximum comfort and support while riding. Both straps have a thin layer of neo-fleece material on the inside that will bring extra comfort and softness. The main V-shaped piece for your front foot is compatible with boards that have one or two rows of inserts. Two options are available depending on the type of inserts (metal or plastic) on your board: M6 Screw Set (Ref. 77228-8001) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 4x Plastic shims 6x M6 22mm screws (SST 316) 6x Metal washers (SST 316), 12mm external diameter Recommended for : POCKET, POCKET CARBON, ROCKET ASC   Self-tapping Screw Set (Ref. 77228-8002) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 6x Self-tapping screws 5x25mm (SUS 316) 6x Metal washers (SST 316), 14mm external diameter 4x Plastic washers (thickness = 2mm), 17mm external diameter Recommended for : ROCKET WING, ROCKET WING CARBON, ROCKET WING – S, ROCKET WING -S CARBON, POCKET CARBON CUSTOM  

The safest, most universally compatible, high-performance control system ever. Now auto-unwinding, stronger and lighter, with unrivalled comfort and grip in all conditions. At North, we know from experience that trust in your control system means everything – especially when you are boosting. The connection point between you and your power source can make or break a session. We’ve poured more than 25 years of research, three years of development, and hundreds upon hundreds of hours of on-water testing into this system, redesigning and improving 70% of the 130 parts that go into it. The Nav Pro is an evolution of our original Navigator Control System, safer, comfortable and easy to use, even while performing at the highest level of competition. With modular spare parts that are easy to replace, ensuring the lifespan of your control system can be extended beyond the industry-norm. The new pro-version of the Navigator is now safer, stronger, lighter, easier to use and packed full of features - like the all-new auto unwind. Features Front-line auto-unwind 20% lighter and 20% stronger Safest single-action reload QR New highest quality SK99 Dyneema Pro Lines Max-traction comfort grip Modular Toolless InterLoop system Universally compatible with any kite* Medium 45-50cm or Large 50-55cm Smoother trimming action Super wear-resistant Nautical colour coding 10cm of adjustment for line shrinkage Eliminates accidental release Reduces accidental unhooking Always rinse in fresh water ISO-21853 Certified Included: Control Bar, Quick Release with Security Finger, 12+10m Pro Lines (Ø1.55mm Front Lines, Ø1.33mm Rear Lines), Pro Freeride Loop, Standard Leash (Pro)  

Infos & Characteristics It all started from an analysis of the advantages and disadvantages of current harness technologies, regarding in particular the softshell (the classic flexible harness) and the hardshell (the rigid shell harness): The Softshell The softshell provides perfect adaptability to the user's body type and movements.But it becomes distorted under the pressure of the kite: The user's sides are compressed.It therefore has good adaptability, but little hold. The Hardshell The hardshell does not become distorted under the pressure of the kite: The user's sides are not compressed.But it has no adaptability to the user's body type and movements.It therefore has a very good hold, but little adaptability. By separating the functions of "effort management" and "comfort", we have created a harness that adapts perfectly to your body type and your movements, while offering unparalleled support.

Eine kürzere Sicherheitsleash, die für Freeride- und Wave-Performance entwickelt wurde - für Rider, die sich nicht aushaken, ist diese Leash nicht im Weg, sondern dient als Sicherheitsnetz, wenn du es brauchst. Features45cm length (unstretched)Soft touch and lightweight materialCompact carabinerMystic 2.0 compact quick releaseNeoprene carabiner coverDesigned for freeride / wave performance

STIFF / FLY / FASTRiders looking to experience unparalleled control and maneuverability on the water. Whether you are behind a kite or a boat, the Hope Craft V2 is not just a foil board, it's a tool for those who want to push the boundaries of what's possible.INCLUDED: Hope Craft V2 Board, (Foil Track Hardware Not Included)DESIGN DIFFERENCE Developed in collaboration with foil wizard Fred Hope, this board is based on the popular Dwarf Craft but has been taken to the next level. The Hope Craft features a top-secret layup that makes it extra stiff, and incredibly reactive. The extra stiffness is a key ingredient in transferring energy from the kite or the boar, through body, into the foil. Using advanced construction and cutting-edge technology, the Hope Craft V2 is the perfect choice for the most advanced and progressive riders looking to master and define the new limits of kite and wake foiling.

FeaturesModular Foil SystemSonar AF72 or AF85 MastGeoLock Load Bearing ConnectionNew S270 Carbon Stabilizer with easy recovery from surface breachingSonar AF Foil Board AdaptorIndustry-standard 165x90mm bolt patternNEW 700mm FuselageSupplied with Sonar Travel BagFront wings sold separately​Foil to board mounting screws sold separatelyMaterialsAluminiumITEMS INCLUDED:  AF72 or AF85 Mast, AF Board Adaptor, A700 Fuselage, S270 Stabilizer with cover, Tool Kit, Sonar Board Adaptor Screw Pack A (M8x40), Sonar Fuselage Screw Pack B (M8x35 Screws, M8 Flat Washers), Sonar Stabilizer Screw Pack C (M8x16mm)*, Sonar Travel Bag

The MA1050v2 is a versatile all-rounder, ideal for wingfoiling at speed, freestyle or in surf, for kite foiling and wake/boat foiling. Ideal for average-weight intermediate riders or heavier advanced riders, we’ve designed the MA1050v2 to deliver a wide speed range, with more emphasis on efficiency and top-speed, while retaining a low stall speed. Highly agile and fast-turning, the MA1050v2 maintains a locked-in feel for upwind/powered riding and ventilation-free tip-breaching so you can crank your turnsFeaturesWide speed rangePlayful and agile and fast turningExcellent top endControllable early liftEfficient glide and pumpabilityVentilation-free tip breachingWing / Kite / Wake / TowMaterialsPre-Preg CarbonTitanium Screws

Tailored and engineered to suit the unique hydrodynamics encountered in the surf, the Charger Water Helmet excels in scenarios ranging from duck diving to navigating over-the-falls situations. The precise fit and material composition help it stay securely in place, rapidly shed water, and eliminate additional forces that may be induced by other helmets adapted for the market. Product Features Close fitting, low drag hydrodynamic profile reducing the chances of neck injuries 3D-engineered EVA internal wrap crafted to safeguard vulnerable areas of the head from both direct impacts and glancing blows Ultra lightweight and fatigue free for all day wearability CE approved impact resistant molded shell EU 2016/425 & EN 1385:2012 Customizable outside protection and internal stick on EVA pads for a precise fit EVA-molded forehead sections maintain a helmet position that’s both gentle and secure Size & Fit 2 shell sizes fitting XS-S-M and L-XL-XXL Fully customizable fit system that creates a shadow like close fit for a stable feel in dynamic conditions Key Features Ultra Lightweight Shell XS-S-M: 275 g L-XL-XXL: 342 g Custom Padding Customizable outside protection and internal stick on EVA pads for a precise fit Dial your protection The impact EVA neck and face protection is designed for user specific customization A factory cut line is provided to allow complete removal of the neck and face protection when preferred For any additional or unique configurations, a freehand cut will be required CE Certificate EU 2016/425 & EN 1385:2012 Close fit and hydrodynamic shaping provide CE certified hard object protection along with a shape that breaks surface tension and stays secure in turbulent conditions