Foil StrapsOur new V-STRAPS have been specifically designed for foilboards. The front strap is a one-piece V-strap which gives the rider a more centered stance on the board, while eliminating the need for multiple row inserts. The V-straps are designed with a lot of comfort and flexibility, so you can step on them, and they prevent injuries in case of a hard fall.Both straps offer a wide range of adjustment for to match your preferred stance and customize your fit.Performance featuresWide range of adjustments Lightweight Flexible construction Comfortable full neoprene wrap 1x Front V-Strap, 1x Back strap Complete set with all washers and srews
AGILE FREESTYLE & SURF FOIL PERFORMANCE The CSF is built for advanced riders seeking ultimate agility, speed, and control in surf and freestyle foiling. Engineered for precision and responsiveness, it delivers lightning-fast acceleration, fluid carving, and high-end performance that lets you push your wing or kite limits with confidence. Designed with 3K twill carbon composite construction, the CSF achieves an exceptional balance of featherlight weight, stiffness, and strength. The moulded foam core keeps the structure lightweight yet durable, while the innovative Skeleton mast base plate removes unnecessary weight for maximum efficiency and direct feedback. The CSF’s hydrodynamic design ensures minimal drag, allowing quick, controlled turns and instant response to rider input. Its modular system provides full customisation—swap components to adapt your setup for surf, freestyle, or all-round performance. Materials 3K twill carbon composite construction Moulded lightweight foam core Skeleton mast base plate FOIL FEATURES Experience our experience. 3K Twill Carbon Construction Ultra-stiff and lightweight composite ensuring maximum strength, durability, and precise feedback. Hydrodynamic Design Minimal drag profile for fast acceleration, smooth carving, and effortless glide. Playful & Reactive Handling Delivers quick response and agility for advanced manoeuvres in surf and freestyle riding. Skeleton Mast Base Plate Optimised design reducing weight while maintaining stiffness and load transfer. Modular System Fully interchangeable components for a personalised setup tailored to your style and conditions. High-Performance Geometry Fine-tuned for expert-level control, speed, and dynamic foil response. Who It’s For Advanced surf and freestyle riders seeking top-tier performance, precision, and responsiveness to elevate their foil sessions to the next level.
Surfboard FinsThe HPF thruster set up is an all-round fin set-up, designed for fast, high performance kitesurfing through a unique blend of speed, drive and release. All Eleveight fins are also suitable for surfboards with a Futures fin box.Performance featuresFutures box thruster fin set up Ultra responsive, fast, lightweight fin construction Carbon-reinforced for responsive flex and drive Lightweight honeycomb core Suitable for a variety of conditions and board types Size: Medium Including fin bag and key
The CS Vary bar combines the highest safety standards and leading performance features in one variable yet ultra-intuitive system. PERFORMANCE FEATURES Four line bar with single front line safety Adjustable bar width thanks to integrated variable bar ends Thermo-coated high-precision lines made in Germany Intuitive Quick-Matic release system with top swivel Ergonomic anti-slip EVA grip pattern for comfort and control Outstanding safety features with remarkable steering precision, the four-line CS Vary bar is fine-tuned to work with the complete Eleveight kite range. Safety, control, and comfort are united in one easy to use intuitive system. New for V4 is redesigned bar ends and floaters for a better fit as well as line protection. The red safety line is also more tightly braided to increased longevity, and the pigtails are stronger for a more durable connection. The new reinforced EVA grip additionally reduces wear and tear. The CS has a single front line safety system and the Quick Matic release aces all international safety tests and standards just by clicking in to lock, or pushing away to release. Variable bar ends allow you to adjust the bar width in a matter of seconds, and the design is slick to reduce strain on the hands. The low V and highest quality thermo-coated lines from Germany enhance reactivity and ensure direct control, and a swivel keeps your red line tangle-free. The single depower line is wear-and-tear resistant and comes with a strong inner core and a spliced Spectra coating that reduces friction and extends durability. The CS Vary elevates safety and control to new heights. E/8 TRUSTED QUALITY Eleveight bars are designed and developed with focus on safety, innovation and functionality. The manufacturing process is using highest grades raw materials and cutting-edge workmanship. They are designed for long lasting durability, safe and a fantastic handling performance.
Twintip Bindings Seago is designed for superior comfort with zero hard spots and an ergonomic fit to ensure the best connection to your twintip. Performance features Maximum comfort with zero hard spotsDual velcro foot strap with four adjustment pointsCustom adjustability to suit any stance and riderExtremely comfortable 4mm neoprene for perfect hold and gripErgonomic 3D shape footpad cushions chop and hard landings Comfort with Zero hard spotsThe Seago is our most comfortable strap with zero hard spots, so you can ride for hours without any discomfort. The Ergonomic 3D shape pads are made from soft anti-slip EVA with specific support toe and arch support and the 4mm neoprene straps offer perfect hold and grip.
Control SystemPut yourself in total control; the CS Auto Bar V2 automatically untwists, keeping you focused on your ride.Performance featuresIntuitive four-line control – optimum single front-line safetyAuto-untwist – uninterrupted flow, automatic rotationPrecision-engineered – dual cavity tube; precise depower & safetyQuick-Matic III release system – upgraded for next-gen safetyHigh-tensile lines – SK 99 thermo-coated, made in Germany
The freeride twin tip, Ignition, makes anyone fall in love with kiteboarding as it is incredibly smooth and fun to ride. Ignition Ignition V1 Progression Freeride 150 x 46 / PERFORMANCE Features ● Progressive freeride twin tip with excellent light wind performance ● Lightweight Paulownia wood core for balanced flex and durability ● Early planing for light wind fun and heavier riders ● Premium construction for more lift and control ● Equipped with Freego pads and straps and 45mm G10 fins / 2021 Changes ● 100 % eco-friendly and plastic-free packaging / DESIGN Vision The Ignition will spark anyone's love for kiteboarding. The beginner-friendly progression twin tip incorporates leading technology that comes with a long list of features and advantages. Most prominently: the outstanding planing and upwind performance, which makes it a favorite for schools and heavy riders in light wind. This is achieved by the board's elaborate but straightforward outline and bottom shape. The Paulownia wood core and top sheet design deliver a flex pattern that provides direct feedback to the rider, ensuring a smooth ride and full control even in rough conditions. The board is built extra sturdy and always fun to ride. It forms the perfect symbiosis with the PS, our recommended tools to accelerate any riders progression. All in all, the Ignition is the perfect companion from the first meters ridden till stomping technical freeride tricks. / DESIGNER Quote Everything is difficult before it gets easy - Ignition eleveights your way. – Franz Schitzhofer
Cross Over Freeride PERFORMANCE Features Precision high-tech freeride kite with an ultra-direct feel Superior and more durable with lightweight Dynea Tex fabric Easy handling with powerful lift and massive hang time Ultra-stable light construction efficient even in low wind Stiff frame for direct feedback and the optimum response / SHORT PRODUCT DESCRIPTION The RS+ is our ultralight top-performance kite, packed with the most innovative technology for those that seek the ultimate freeride experience. / DESIGN VISION Pimped to a shiny new level, the RS+ V2 is like a top-performing racing car that's light, direct and powerful. Combining the core DNA of the RS with our innovative Dynea Tex material, the RS+ offers a premium high-performance freeride experience. Version 2 has been refined even further with more efficient force distribution and an improved yet stable low end. The bar pressure has been reduced while maintaining direct feedback, and the turning characteristics are more harmonised throughout the wind range. The RS+ V2 has impressive predictability overall and will surpass your flying experience. Featured uniquely in the RS+, our superior Dynea Tex fabric outperforms regular Dacron with a higher tear and tensile strength that is up to 32 times stronger. Dynea Tex is also 30% lighter than traditional Dacron and other normal materials used in inflatable kites. By weaving a complex structure of ultra-strong Dyneema fibres, Dynea Tex is the optimum balance between responsiveness, lightweight and long-term performance. The XT Light material featured in the struts of the RS+ has been designed to reduce weight even further. It gives the right amount of stiffness for the frame structure yet will allow enough twist when needed. The increased structural rigidity supercharges the responsiveness in the kite. Less deformation and more direct and precise flying characteristics have been achieved as a result. Infused with superior materials and technology, the RS+ will upgrade your session to VIP with exceptional advancement in freeride potential. / RS V7 KEY CHANGES New panel cuts in the canopy distribute force more efficiently A new deeper profile allows for an easily accessible and better low end with a more stable kite position in the wind window. A more conical LE with increased diameter in the centre and thinner tips. This relocates the twist further outwards and allows a more precise turn that exactly follows the rider's input. The wingtip sweep has been further adjusted for a linear load input when turning. These two changes harmonize the turn characteristic throughout the wind range and contribute to the overall impressive predictability of the RS+. The bridle geometry is adjusted to the new LE diameters and shape to reduce the bar pressure while still maintaining direct feedback. Smaller LE bridle deflectors
The Master C+ is our lightest and most premium carbon performance freeride to freestyle twintip, crammed with innovative features and superior materials. PERFORMANCE FEATURES Premium freeride to freestyle performance with superior construction Super lightweight and dynamic infused with state of the art carbon Optimised for disruptive freestyle and Big Air with speed and pop Highest impact resistance and performance in our range Equipped with Firefin click in fin system Design Vision The Master C+’s disruptive nature allows the rider to shatter any limit, pop harder and boost higher than ever before. It’s our lightest and most performance freeride to freestyle crossover twintip, for riders that demand the ultimate premium experience. We fused together superior design, unmatched materials, and masterful craftsmanship. The Master C+ features a precision-milled Super Fly 3D Paulownia wood core for significant weight reduction that’s coated entirely with high-tech carbon fibre. Using superior woven Spread Tow Carbon we get the highest performance out of the carbon fibres, both in stretch and compression. This creates exceptional flex and the highest impact resistance in our board range, for an enhanced riding experience. The 3-D dome deck and bevelled rails vary the thickness of the edges along the board’s outline allowing the tips to be thinner while increasing stability. This helps the release when popping, and the unidirectional bottom carbon stringer also increases speed and refines flex. Our highly innovative PRS rails improve upwind travel, cut through chop more comfortably, and enhance speed, while the Multi Stage Rocker with deep tip channels gives better grip. Staying in control and holding the edge is a breeze, even in raging storms. Now with striking new graphics, the Master C+ is the first choice for ambitious freeride to freestyle riders seeking the highest performance.
COMPACT, DURABLE DAY BAGS INSPIRED BY OUR RIDERS.The Team Series is our compact daily companion within our range of kite bags, inspired by our team riders. Crafted from durable materials, this 20-litre backpack is designed to be a versatile storage solution, equipped with an integrated laptop sleeve, zippered pockets, and stash areas throughout. The Team Series is perfect for your daily routine or as a reliable and resilient travel companion for your kite adventures.Performance featuresVersatile backpack with adjustable shoulder strap Main storage compartment with padded laptop sleeve Heavy-duty 420D polyester construction Durable non-corrosive zippers 20 L storage
Surfboard PadsThe new Eleveight traction pad series are designed with many performance features and superior materials. We focused on comfort, support and perfect grip to ensure that your foot stays connected to the board. The EVA foam and groove pattern are kiteboard-specific optimized. The construction allows the rider to use the pads with or without footstraps. All Eleveight pads are also suitable for surfboards.Performance featuresBack foot Kiteboarding/Surf traction pad 4-piece tail pad Height: 340mm Width: 320mm Kick: 28mm Groove: Micro Corduroy Premium 3M® adhesive backing
Freestyle FreerideCrammed with superior materials, the Master C+ is our lightest, most premium freeride to freestyle twintip.Performance featuresSuperior carbon ride – premium freeride to freestyle performanceState-of-the-art build – featherlight feel, explosive responseOptimised pop – perfect takeoff, high-impact resistanceSustainably sourced – reduced ecological footprintEquipped with fins – 45mm G10 performance
LIGHTWEIGHT CONTROL & CROSSOVER PERFORMANCE The GT3+ redefines freeride and wave versatility for ambitious wing foilers. Engineered with a stiffer, lighter construction, it delivers seamless drift, intuitive control, and effortless handling across all conditions. Built for performance-driven riders, the GT3+ combines precision design with cutting-edge materials for superior responsiveness, stability, and upwind efficiency. The redesigned strut shape features a longer canopy connection for improved stiffness, direct control, and enhanced load transfer. Paired with a full carbon boom, it offers a tight, responsive feel with optimal grip and power delivery. The deep profile provides excellent low-end power and a wide wind range, while the dihedral shape and refined tip twist ensure exceptional drift and balance in waves. Constructed with XTC TEX 2.0 and Teijin’s X6 ripstop, the GT3+ is both durable and incredibly light. Reinforced centre segments on the leading edge increase rigidity, while the reduced-diameter leading edge minimises drag for superior upwind performance. A new Push Lock valve allows for faster inflation, and the redesigned bag provides smarter, compact storage. Materials XTC TEX 2.0 – ultra-stiff, lightweight structural fabric Teijin X6 Ripstop – reinforced trailing-edge canopy material Full Carbon Boom – lightweight, rigid control system WING FEATURES Experience our experience. XTC TEX 2.0 Construction Premium composite material offering exceptional stiffness, reduced weight, and long-term durability. Teijin X6 Ripstop Canopy Reinforced canopy improving load distribution, profile support, and resistance to wear. Full Carbon Boom Feather-light control bar providing precise handling, optimised grip, and direct power transfer. Redesigned Strut Geometry Longer canopy connection increasing stability, control, and responsiveness across all wind ranges. Deep Profile & Refined Tip Twist Improves low-end power, pumping efficiency, and drift performance while maintaining balance and control. Dihedral Shape Enhances stability and intuitive handling for freeride and wave performance. Push Lock Valve System Quick and efficient inflation and deflation for faster setup and pack-down. Who It’s For Ambitious freeriders and wave riders seeking lightweight construction, next-level responsiveness, and smooth, stable control in all conditions.
Eleveight Master V9 – Freestyle & Freeride Kiteboard The Master V9 defines crossover performance, combining powerful freeride capability with explosive freestyle potential. Designed for riders who want it all, this board delivers dynamic control, refined pop and versatile performance across varied conditions. Performance Features Freeride-to-Freestyle Weapon Engineered to balance freeride comfort with freestyle energy for riders seeking one board that performs in every scenario. Explosive Pop & Speed Optimised medium flex and construction deliver dynamic energy for big jumps and fast riding. Unbeatable Carving & Upwind Control Refined shape and rail technology improve grip, upwind travel and precision on edge. Advanced Control & Grip Designed to maintain confidence in critical moments, with responsive feedback and stability at high speed. Performance-Ready Design Comes equipped with 45mm G10 performance fins to ensure immediate readiness when you hit the water. Design & Construction The Master V9 is engineered with cutting-edge materials and construction to push boundaries without compromise. Its 3D dome deck and bevelled rails reduce weight while enhancing stability, drive and pop. The refined bottom channels and optimised rocker amplify grip and upwind efficiency in almost any condition. A precision-milled Super Fly 3D wood core paired with advanced carbon stringer placements creates a medium dynamic flex pattern. This delivers crisp pop and consistent feedback while maintaining comfort and control. Stiff basalt carbon materials add strength and damping for dynamic and controlled performance. Riding Characteristics The Master V9 excels across multiple riding styles: Freestyle Wakestyle – stable landing performance and responsive control. Freestyle Big Air – fast, controlled pop and explosive lifts. Freeride – a balance of comfort, upwind travel and carving ability. Progression – confident handling and accessible performance. Light Wind – dynamic response and early planning. Sizes & Specs 136 × 41.5 cm Designed for riders approx. 55–80 kg Includes 45mm G10 fins Approx. board weight: 2.55 kg 139 × 42 cm Suitable for riders approx. 65–90 kg Includes 45mm G10 fins Approx. board weight: 2.65 kg 142 × 42.5 cm Suitable for riders approx. 75+ kg Includes 45mm G10 fins Approx. board weight: 2.80 kg Core Technologies Super Fly 3D Wood Core – premium wood core optimized for strength and responsiveness. Basalt Carbon Construction – basalt fibre materials for higher strength, stiffness and damping. Carbon Stringer – optimises flex dynamics for pop and energy transfer. PRS Rails & Bevelled Rails – improved upwind grip and carving control. Refined Bottom Channels – enhanced water flow efficiency and edge hold. Ultra Durable Bottom Sheet – abrasion-resistant base for long-lasting performance. Who It’s For The Master V9 is built for ambitious kiteboarders who demand an all-in-one board that performs at the highest level in freeride, freestyle and crossover riding. Whether you’re chasing big air, carving upwind or progressing tricks, the Master V9 delivers the balance of power, control and response to elevate your sessions.
Freeride / FreestyleThe WFS V7 is designed for limitless freeride, combining effortless control, refined aerodynamics and intuitive handling.It delivers a light, clean and responsive feel across freeride, freestyle progression and wave riding. With efficient power generation, stable drift and predictable control, the WFS V7 is built to perform across a wide wind range and different riding styles.Performance FeaturesPerformance freerideExcels at every level and in every condition.Balanced & intuitiveNatural positioning and feel throughout the session.Featherlight aerodynamicsFeatures a full carbon CS Wing Bar for light and direct handling.Direct controlResponsive handling without fatigue.Stiff frameSupports instant power generation and drift.Design & ConstructionThe WFS V7 is built for freeride performance with effortless drift, efficient power generation and confidence in any condition.Optimised canopy tension and a refined V profile increase the wind range and improve direct response. The exoskeleton centre frame stiffening on the leading edge increases rigidity, while reduced drag and turbulence support crisp handling, fast response and better free fly balance.Premium materials include Teijin X4 ripstop, an X6 reinforced trailing edge and XT 2.0 woven fabric for durability, stability and controlled stiffness.New for V7:Ergonomic CS Wing Bar to reduce fatiguePush Lock valve for faster setupReinforced seamsXT 2.0 woven fabric for added strengthLarger window panels for improved visibilityDeeper central sectionNew 6.5 m² and 7.5 m² sizes with XT light constructionBroader crossover abilityIncreased wind rangeImproved free fly balanceTechnologyXT 2.0High-tenacity cloth used in the inflatable structures. It allows twist while balancing stability and stiffness. Developed with Teijin for strength and performance, with a UV-resistant coating and precision weave for durability.X4 RipstopTough and tear-resistant canopy fabric for long-term performance. The 4×4 ripstop polyester construction has minimal stretch, added UV protection and supports dynamic responsiveness.X6 RipstopLightweight ultra-high-tenacity polyester yarn used in the trailing edge. It adds stability and tension, reduces flutter and improves force transition between the inflatable structure and canopy.Push LockSimple valve operation for easy setup and pack-down. Push and turn counter-clockwise for inflation, push down and turn clockwise for deflation.CS Carbon Wing BarLight and stiff carbon composite wing bar with two integrated attachment points on the middle strut.2 Window PanelsTwo large window panels provide optimum visibility. Strong transparent PVC material adds durability.Leash AttachmentLeash attachment points are featured on all Eleveight wings.Exoskeleton Centre Frame StiffeningThe two centre segments of the leading edge are additionally reinforced with an extra layer of XT 2.0 to increase rigidity.German Made PU Bladder MaterialTough, lightweight German-made material forms the core inflatable bladder structure and supports long-lasting performance and reliability.Load Dynamic Triple SeamTriple-stitched, reinforced leading-edge closing seam prevents stitch movement and maximises durability. Extra centre reinforcements handle higher loads, while high-strength adhesive seam tapes increase rigidity.Ultra-Light Load DiffuserX6 ripstop fabric creates a lightweight, stable transition between the canopy and trailing edge. Double layers reinforce the tear line, reduce flapping and support aerodynamic shape and durability.2 Step Force TransitionExtra double X6 layer between inflatable frame and X4 ripstop for optimised load transition, enhanced stability and protected load transfer.Technical SpecificationsProfile / ShapeLow aspect ratio with single middle strutEngineered for better free fly balance and neutral driftDeeper central section with more canopy area to increase wind rangeOptimum visibility through two large window panels next to the strutLeading EdgeLarge central leading edge diameter engineered for stiffness and powerXT 2.0 fabric for rigidity and durabilityEnhanced stiffness in the centre with controlled twist toward the tipsPush Lock inflation system for faster setupPremium lightweight German-made TPU bladder materialControl SystemShort, light integrated Carbon CS Wing BarVersatile grip optionsDirect handling with efficient power delivery and stability in all conditionsIntuitive hand positioningLeading edge handle for surfing, downwinding or one-handed controlSupplied with a coiled wrist leashSizes & Specifications2 m²Wind range: 25–35+SKU: EWING2702Weight: 1.62 kgSpan: 220 cmCenter: 123 cmBoom size: 80 cmPSI: 8.53 m²Wind range: 20–38SKU: EWING2703Weight: 1.86 kgSpan: 252 cmCenter: 142 cmBoom size: 80 cmPSI: 8.53.5 m²Wind range: 17–35SKU: EWING2735Weight: 2.04 kgSpan: 270 cmCenter: 153 cmBoom size: 88 cmPSI: 8.54 m²Wind range: 15–32SKU: EWING2704Weight: 2.45 kgSpan: 290 cmCenter: 165 cmBoom size: 88 cmPSI: 84.5 m²Wind range: 13–28SKU: EWING2745Weight: 2.33 kgSpan: 307 cmCenter: 175 cmBoom size: 95 cmPSI: 85 m²Wind range: 10–25SKU: EWING2705Weight: 2.51 kgSpan: 325 cmCenter: 185 cmBoom size: 95 cmPSI: 85.5 m²Wind range: 8–22SKU: EWING2755Weight: 2.67 kgSpan: 342 cmCenter: 192 cmBoom size: 105 cmPSI: 86.5LW m²Wind range: 7–18SKU: EWING2765Weight: 2.87 kgSpan: 365 cmCenter: 212 cmBoom size: 105 cmPSI: 77.5LW m²Wind range: 6–16SKU: EWING2775Weight: 3.08 kgSpan: 385 cmCenter: 225 cmBoom size: 105 cmPSI: 7Additional InformationAll weights include boom and are listed without bag.Weight tolerance: +/- 5%.Supplied with a coiled wrist leash.
Wave / Freefly / FreerideThe GT4+ is engineered for agility and intuitive drift. This lightweight wing delivers top wave and freeride performance with a direct, responsive and efficient feel.As part of Eleveight’s Plus range, the GT4+ features advanced technology materials that are lighter, stiffer and stronger for maximum efficiency, direct handling and extremely responsive performance.Performance FeaturesFreeride wave seriesEffortless crossover performance.Stability in any waveDesigned for intuitive drift.Superior constructionLightweight and stiff materials for high performance.Full carbon boomOptimised grip with reduced fatigue.Direct feelShaped for enhanced control.Design & ConstructionThe GT4+ delivers wave-to-freeride versatility with sharper responsiveness, instant feedback and confident control. Advanced material refinement makes the wing lighter and more direct, with seamless drift and power.An optimised strut shape with an extended canopy connection improves stiffness and handling. The ergonomic carbon boom improves load transfer and precision for a tighter, more connected feel.The GT4+ uses premium XTC TEX 2.0 and X6 ripstop materials for a light, stiff and durable construction. An additional XTC TEX 2.0 reinforcement layer across the central leading edge enhances rigidity and helps the wing maintain its shape in demanding conditions.The dihedral-shaped structure, refined tip twist and slim leading edge reduce drag for outstanding upwind performance. The deep, efficient profile supports low-end performance and a wide usable wind range.New for the GT4+:Redesigned ergonomic CS Wing Bar for improved grip comfortReduced fatigue during long sessionsTriple closing seam for extra strength and durabilityReinforced T-centre joint with exoskeleton structureImproved rigidity and load transferPush Lock valve for faster inflation and deflationLightweight, performance-driven constructionDesigned for ambitious freeriders and wave ridersTechnologyXTC TEX 2.05× stronger than traditional Dacron while remaining stiff and ultra-light. Low water absorption and high-modulus yarns reduce weight and minimise deformation in inflatable structures. A smaller, stronger leading edge and struts deliver direct, responsive and efficient steering.X4 RipstopSuperior canopy fabric that is tough and tear-resistant for long-term performance. The 4×4 ripstop polyester construction has minimal stretch and added UV protection. Developed with Teijin for strength and dynamic responsiveness.X6 RipstopLightweight ultra-high-tenacity polyester yarn used in the trailing edge. It increases stability and tension, reduces flutter and improves force transition between the inflatable structure and the canopy.Push LockSimple and intuitive valve operation for effortless setup and pack-down. Push and turn counter-clockwise for inflation, push down and turn clockwise for deflation.CS Carbon Wing BarLight and stiff carbon composite wing bar with two integrated attachment points on the middle strut.2 Window PanelsTwo large window panels for visibility.Leash AttachmentLeash attachment points are featured on all Eleveight wings. All wing products are sold complete with a coiled wrist leash.Exoskeleton Centre Frame StiffeningThe two centre segments of the leading edge are additionally reinforced. An extra layer of XT 2.0 increases rigidity to form a stiffening exoskeleton for the centre frame.German Made PU Bladder MaterialTough, lightweight German-made material forms the core inflatable bladder structure and is engineered to optimise weight and durability.Load Dynamic Triple SeamTriple-stitched, reinforced leading-edge closing seam prevents stitch movement and maximises durability. Extra centre reinforcements handle higher loads, while high-strength adhesive seam tapes increase rigidity.Ultra-Light Load DiffuserX6 ripstop fabric creates a lightweight, stable transition between the canopy and trailing edge. Double layers reinforce the tear line, reduce flapping and enhance aerodynamic shape and durability.2 Step Force TransitionExtra double X6 layer between the inflatable frame and X4 ripstop. The optimised load transition enhances stability and durability while providing efficient, protected load transfer.Technical SpecificationsProfile / ShapeDihedral shaped structureOptimised angles and wingspan for balanced freerideTight canopy tension for maximum drift and manoeuvrabilityOptimised panel cuts to control stretchLeading EdgeReinforced leading edgeCentral reinforcements enhance stiffness while allowing twist at the tipsXTC TEX 2.0 fabric for a lighter and stiffer constructionPush Lock inflation system for faster setupPremium lightweight German-made TPU bladder materialControl SystemCarbon CS Wing BarShort, light integrated carbon handle with versatile grip optionsDirect handling with efficient power delivery and stability in all conditionsIntuitive hand positioningLeading edge handle for surfing, downwinding or one-handed controlSupplied with a coiled wrist leashRiding CharacteristicsFreerideControlWind rangeFreestylePower developmentProgressionEasy to rideControlPumpingRaceUpwindShape stabilitySurfNeutralityDriftSizes & Specifications3 m²Wind range: 18–40+SKU: EWING27GT03Weight: 1.81 kgSpan: 255 cmCenter: 145 cmBoom size: 80 cmPSI: 8.54 m²Wind range: 13–34SKU: EWING27GT04Weight: 2.07 kgSpan: 292 cmCenter: 168 cmBoom size: 88 cmPSI: 8.55 m²Wind range: 10–25SKU: EWING27GT05Weight: 2.36 kgSpan: 330 cmCenter: 188 cmBoom size: 95 cmPSI: 76 m²Wind range: 8–20SKU: EWING27GT06Weight: 2.59 kgSpan: 356 cmCenter: 206 cmBoom size: 105 cmPSI: 7Additional InformationAll weights include boom and are listed without bag.Weight tolerance: +/- 5%.Supplied with a coiled wrist leash.
The state-of-the-art shortboard, Curl, delivers dynamic rail-to-rail surf performance in powerful medium to high waves. 5 ́1 x 17 5/8 x 2 1/16 - 21.5 Ltr 5 ́4 x 18 1⁄2 x 2 3/16 - 25.5 Ltr / PERFORMANCE Features ● Modern shortboard for powerful surfing in medium to big waves ● Lightweight and durable CVC construction with a Bamboo top deck ● Single concave bottom to generate speed and dynamic drive ● Medium rocker line for full control and explosive hacks ● Comfortable high-density EVA pads provide perfect grip / DESIGN Vision We designed the Curl for ambitious surfers that need performance to be at their feet when tackling the surf. It is great in all conditions, from weak and blown out wind swells to barreling reef slabs. Explosive hacks are coming naturally to those riding this board. The magic lies within the state of the art composite vacuum sandwich construction that is lightweight and extra durable, featuring a tough bamboo top deck and a full carbon bottom. A single concave at the bottom, thin rails, a medium rocker line, and a squash tail provide the outstanding surf characteristics. Ride the Curl and throw some serious spray. / DESIGNER Quote The Curl combines a professional surf shape with outstanding materials and craftsmanship. It is meant to rip in all conditions. – Peter Stiewe
Dedicated Wing Foilers will love the early lift and glide as well as the stable performance from our larger wing range. PERFORMANCE FEATURES Dedicated Hydrofoil range for Wing Foiling Carbon front and back wings for outstanding performance Early Lift, easy glide and incredible stability 75 cm mast for the maximum carving ability Quick-Connect-Technology and includes a travel bag We developed our new precision HXS Hydrofoil Series to crossover riding styles for full freeride performance. The larger-sized 1200-1950 wings in the range are dedicated to Wing Foiling where riders will benefit from the intuitive lift and stability they deliver. Built for outstanding performance, the Carbon front and back wings offer maximum durability paired against the stainless hardware. The mast and fuselage feature an anodized aero-grade alloy construction giving an optimal ratio between strength and weight. All components benefit from Quick-Connect-Technology that will get you to the water faster, and a handy travel bag comes included for maximum protection between sessions. Choose your wing size, connect and glide, whatever your foiling style.
he full carbon Process C+ is packed with the latest performance-tech materials for ultra-dynamic freeride fun. PERFORMANCE FEATURES Premium full carbon for high-performance freeride Optimum grip and upwind ability Smooth landings and superior carving with progressive flex Reinforced light construction for exceptional control Equipped with 45mm G10 fins DESIGNVISION The Process C+ is a highly advanced full carbon big brother to the Process, and packed with performance enhancements. While the outline and shape are identical to the Process, the standout features are in the construction on the inside. For Version 4 we revised the flex patterns and made the Super Fly 3D Paulownia wood core thinner to decrease the weight and give more flex. By covering it with a feather-light premium layer of Biax Carbon, the Process C+ allows the rider to hold the edge longer, fully loading the board to act as a catapult when boosting. The C+ features our highly innovative PRS technology now with thinner rails that enhance speed and ease of upwind travel. The smooth rocker outline planes exceptionally early, while the sophisticated channel layout provides even more grip and control in fierce gusts and howling storms. To ensure the perfect linear flex between the centre and the rails, we kept the thickness of the tips slender and squared off. The result is a faster-turning speed with added responsiveness and pop. The Process C+ is a favourite choice for the performance-driven freerider looking for a premium ultra-dynamic board.
PERFORMANCE FEATURES Five strut Open-C design High-performance kite to excel in freestyle and big air High aspect ratio for explosive lift Medium to low sweep provides power and grunt Plenty of line slack simplifies freestyle tricks Good upwind performance and great stability New bridle system with added trim option for customized performance Superior materials like X4 canopy and XT cloth made by Techno Force™ SIZES 06 / 07 / 08 / 09 / 10 / 12 / 14 / 16 DESIGN VISION Staggering loops, radical freestyle tricks, and explosive boosts – these are the key features embedded into the DNA of our iconic FSeries kite. We tailored this high-performance wing to suit the needs of advanced freestyle and big air riders while ensuring that its professional traits are accessible to pilots of all levels. Therefore we went with an Open-C design that comes with all the advantages of a true C-kite such as direct control, line slack and a wide angle-of-attack for powerful maneuvers. We made sure that the FS shows maximized stability, a radical lift and is easy to handle in all conditions and situations. This kite is the first choice of our freestyle and big air team riders. It takes you as far as you are willing to push.We designed the kite with low to medium swept wing tips to provide additional power, which, in combination with the high aspect ratio and ultra-responsive turning, results in those go-big-or-go-home characteristics Still, the FS is surprisingly comfortable to ride as it easily travels upwind, cushions gusts and also covers a huge wind range.Only prime grade materials such as the X4 Ripstop canopy made by Techno Force™ and Teijin’s latest XT leading- and trailing edge material are used to construct the FS, which translates to unmatched durability and performance. We implemented subtle yet powerful changes that improve the kite’s performance even more. For the FSeries’ third generation we introduce an increased angle-of-attack as well as aspect ratio, thinner struts and an innovative five-point bridle setup that increases stability and reduces kite twist.The FS is an all-star power machine that tears down your limits.
Performance Freeride The full carbon Process C+ is packed with high-tech performance materials for ultra-dynamic freeride fun.Performance featuresPremium full carbon for high-performance freerideLight construction with progressive flex and optimum gripReinforced for exceptional carving and control with smooth landingsSustainably sourced materials and reduced ecological footprintEquipped with 45mm G10 fins
The smaller Evolve V3 is compact with balanced stability, dedicated to more advanced wing foilers and prone surfers.Performance featuresDedicated durable board range for advanced wing foilersCompact shape for enhanced stability and volume distributionLighter CVC construction optimised for wing foilingAdjustable inserts and track mount system for customised setupNew small sizes for more experienced riders or prone surfers Size Chart Eleveight Evolve CV3 Size Dimensions (cm) Volume Weight (kg) 4'6" 140 x 51 x 9 40 L 4.03 4'8" 146 x 59 x 11 60 L 4.80 * Performance shape designed by Eleveight
Freeride WaveThe GT2+ delivers on performance for demanding wing foilers seeking a lightweight choice with exceptional drift for top wave or freeride action.Performance featuresPerformance wave to freeride crossover wingNew lightweight full carbon CS Wing handlesStiffer and even lighter with XTC TEX materialIntuitive drift stability when surfingDual infill panel for advanced profile support