1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET   UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET

All-around Freeride Kite Foil Standard Mast Size: 90 cm | Aspect Ratio: 6.5 | Wingspan: 25.3"/64.2 cm | Projected Surface Area: 600 cm2 Forgiving and user-friendly, the Thrust Kite Foil Complete delivers a super smooth foiling experience for anyone from beginner to advanced to cruise on. Its segmented front wing combines the stability of a dihedral shape with the early take-off and low speed lift of an anhedral wing. Tuned for balance, this foil setup reduces pumping time by helping riders quickly find a stable plane and lock in, while the higher aspect ratio lengthens the glide. A large sweet spot delivers ample stability for a more natural feel that encourages riders to move more freely and gain the confidence to progress. Smooth gliding and incredibly intuitive, this effortless setup frees your attention to enjoy the experience and expand your abilities. The Abracadabra Plate connection makes it quick and effortless to detach and store your separated board and foil. One screw is all it takes to quickly and easily disconnect the entire foil system from your board, while the bottom of the plate can remain in place. Just a few turns of a #3 Phillips head screwdriver yields a secure and tight connection between foil and board. The Abracadabra Plate is available in the complete set or as an aftermarket item for any current and previous Naish aluminum mast and is also offered as an accessory for the carbon mast. View the Assembly Instructions HERE The Hover Kite 130, 155, and 160 foilboards have a shallower track system and therefore require the shorter screws as supplied with the board. These boards CANNOT be used with the longer screws that come with the Naish Thrust foil.When pairing all other Naish Hover Foilboards with your Naish Foil, use the screws supplied with the foil.  Reference which screws to use HERE   WHAT'S NEW Front Wing–50% Lighter Back Wing Monocoque Ultra Robust Back Wing Construction Heavy-duty Fuselage Abracadabra Plate Connection Stealth Stripes CONSTRUCTION   Aircraft Grade High Precision CNC Cut Fuselage Aircraft Grade Extruded Aluminum Mast (All aluminum masts will receive a custom wet-sanded Speed Finish) Carbon/Glass PrePreg & Hi Mod Foam Core Front Wing Construction Carbon/Glass PrePreg & Hi Mod Foam Core Monocoque Back Wing Construction 316 Marine Grade Stainless Steel Hardware COMPLETE KIT INCLUDES   Front Wing KS 2 Back Wing KS 2 Mast 90 cm/Aluminum Fuselage KS/Surf Foil Assembly Screw Set Abracadabra Plate Abracadabra Plate Screw Set Foil Cover

2022/23 Naish Jet Foil Series for maximum performance There are three versions: Jet Foil HA (High Aspect) Semi Complete (=no mast) Jet Foil MA (Medium Aspect) Semi complete  (=no mast) Jet Foil Standard (Low Aspect) Semi Complete  (=no mast) Here are the main differences between these models. High Aspect (HA) Foil: High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio). These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance. High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio. Medium Aspect (MA) Foil: Medium aspect foils strike a balance between the characteristics of high and low aspect foils. They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability. Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control. Low Aspect (LA) Foil: Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio. These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed. Low aspect foils are often chosen for learning to foil and for cruising at lower speeds. When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use. The high number (for example 1600) gives you the surface of the front wing in cm2. Scope of delivery: Jet front wing + EVA cover Stabilizer Jet HA + EVA cover Fuselage Carrying case Torx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)

Created in collaboration with Cloud IX surf foils the Impulse wing set confidently crosses kite, surf and wake hydrofoiling. Designed to provide rapid lift and long glide, along with a wide speed and wind range. The Impulse will take your freeride kite hydrofoiling to the next level. Allowing more time for tack and gybe transitions, constant wing engagement on jump landings, and the ability to drop a size kite or get out in even lighter wind conditions than ever imagined. These same design attributes make the Impulse ideal for mounting on a hydrofoil compatible SUP or prone surfboard. Efficient and smooth controlled lift, along with the ability to generate glide by pumping the wing, keeps swell energy connectivity easy and manageable. This magic can be translated behind the boat where the Impulse excels at sustained hydrofoiling on both the primary and secondary wakes with or without the rope!Front wing area: 1100 cm2 Standard Impulse set sizeMast Length: 94.8cm alloy 2480gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 4420 (with variance) Short mast Impulse set sizeMast Length: 60cm alloy 1770gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 3750g (with variance) Technical DataRider level Intermediate – AdvancedConfort zone speed 12-18 miles/hLow end lift speed 5 miles/hTop end speed 24 miles/h Kite & Surf Crossover use for kite, surfing, SUP and wake Carbon Wings Carbon construction low aspect wing Alloy Mast Efficient profile extruded alloy mast (available in 2 lengths) Carbon Fuselage Carbon fuselage with dual position rear wing mounting Lightweight Lightest crossover hydrofoil kit available

GRAVITY FCT 2200 COMPLETE FOIL WITH MAST The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential. Right in the line of its best-selling carbon sibling, this new Gravity is the ideal foil to get started and progress in wing-foiling and surf-foiling.   Smooth take-off Stability and lift Easy to turn  Area: 2195 cm²Span: 110 cmAspect Ratio: 5.5Weight: 2 kg (wing only)Alu Fuselage: 74 Surf

you can choose between: - Foil Set Freeride 820 with 1500 cm2 - Foil Set Freeride 1020 with 2100 cm2 - Foil Set Hi Aspect 910 with 1250 cm2 - Foil Set Hi Aspect 1000 with 1350 cm2 The Foil Sets are complete and come with: VAYU Front Wing VAYU Rear Wing Short Fuselage 68cm 75cm VAYU Aluminium Mast Top Plate plus the required adapters  

ALLROUND (FREERIDE / FREESTYLE / FREESURF / PRONE / WIND) Der Aero Free ist unser Alleskönner. Unsere drei neuen größeren Größen 1500, 1750 und 2000 sind die perfekten Wings für Einsteiger und Aufsteiger. Ihre stabilen Flugeigenschaften, der frühe Lift und die enorme Endgeschwindigkeit machen sie zu den idealen Wings für schnellen Fortschritt. Die drei kleineren Größen 800, 1000 und 1250 sind bereits seit einem Jahr auf dem Markt und haben sich als leistungsstarke Allrounder etabliert. Der Aero Free liegt in Bezug auf Gleitleistung und Manöverfähigkeit genau in der Mitte unserer neuen Glide und Carve 2.0 Reihe. Er hat eine etwas höhere Aspect Ratio als der Carve 2.0, aber ein anderes Profil und eine andere Outline, die eher auf eine gute Mischung aus Manövrierbarkeit, Gleiten, Pumpen und allgemeiner Benutzerfreundlichkeit abzielt. Der Aero Free deckt alle Disziplinen ab: Wing, Prone, SUP und Windsurf Foiling. Der Name verrät es bereits, dieser Wing ist nicht an eine bestimmte Disziplin gebunden, er fühlt sich bei sämtlichen Bedingungen und Könnensstufen wohl - egal ob Freeride, Freestyle, Freerace, Surf oder Downwind. Mit einem Aspektverhältnis zwischen 6.0 für das größere 2000er und 7.3 für das kleine 800cm2 sind diese Front Wings genau richtig, um die Grundlagen zu erlernen und dein Foil-Können in einer Vielzahl von Bedingungen zu beschleunigen - vom Flachwasser-Cruisen bis hin zu Sprüngen und Foilen in den Wellen. Mit seiner verspielten Outline und seinem widerstandsarmen Profil fühlt er sich aufregend und schnell an, bietet aber dennoch viel Leichtigkeit und Kontrolle. Es gibt eigentlich keine Bedingungen, in denen sich dieser Wing nicht zu Hause fühlt!   Stabilizer C Unsere Stabilizer C haben sich in den letzten Jahren in Kombination mit sämtlichen Front Wings bestens bewährt. Sie sind das, was man als "traditionell" bezeichnen würde mit einer mittleren Aspect Ratio, flach in der Mitte und ein subtiles Winglet zu den Wing Tips hin. Ein gut getestetes und bewährtes Design, das hervorragend mit unseren Aero Free SLS und Aero Lift SLS Front Wings zusammenpasst. Die C-Serie steht für Kontrolle. Bei ihnen geht es darum, den Fahrer auf seiner Flugbahn zu unterstützen und dem Foil Kontrolleigenschaften zu verleihen, ohne den Spaßfaktor einzuschränken. Obwohl sie einen stabilen Flug gewährleisten, sind sie perfekt für sanfte Turns auf der Welle. Mit Hilfe der brandneuen dünnen Shims kannst du den Anstellwinkel deines Stabilizers in Schritten von +/- 0,3 Grad anpassen, passend zu deinem Fahrstil oder den aktuellen Bedingungen. SURFACE (CM / IN²) 800 / 124.0 1000 / 155.0 1250 / 193.8 1500 / 232.5 1750 / 271.3 2000 / 310.0 SPAN (CM / IN) 78 / 30.8 84 / 33.2 90 / 35.6 95 / 37.5 102 / 40.3 110 / 43.5 ASPECT RATIO 7.2 6.8 6.4 6.0 6.0 6.0 REC. STABILIZER C 216 C 216 C 250 C 250 C 250 C 300 SCREW HOLE 1 (CRBN FL / ALU FL) M8X30 / M8X25 M8X30 / M8X25 M8X30 / M8X30 M8X35 / M8X30 M8X35 / M8X30 M8X35 / M8X30 SCREW HOLE 2 M8X25 M8X30 M8X30 M8X30 M8X30 M8X30 SCREW HOLE 3 (CLOSEST TO MAST) M8X25 M8X30 M8X30 M8X30 M8X30 M8X30 REC. TORQUE 15 NM 15 NM 15 NM 15 NM 15 NM 15 NM

MASTS & FUSELAGES AL 3.0SIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90 Unsere stark verbesserten AL3.0 Masten und Fuselages sind unglaublich steif und direkt, fast 20% leichter und kommen mit verbessertem Strömungsverhalten als die Vorgängermodelle. Ein neuer Trimm macht die Foils deutlich verspielter ohne Abstriche bei der Nutzerfreundlichkeit einzugehen.Unser Team hat nicht nur monatelang auf dem Wasser getestet, die Entwickler unserer Foils haben die Kräfte, Geschwindigkeiten und unterschiedliche Anströmwinkel der verschiedenen Situationen beim Foilen analysiert und auf dieser Basis ein neues Mastprofil und Fuselages mit deutlich geringerem Widerstand entwickelt, dabei den Trimm entscheidend verbessert und das Gewicht massiv reduziert ohne Abstriche der Festigkeit des gesamten Systems zu machen. Die AL 3.0 Foils fahren sich verspielter und direkter und decken eine noch größere Bandbreite an Bedingungen und Könnenstufen ab.Wähle die Mastlänge und Fuselage entsprechend deines Fahrlevel, der Bedingungen und deiner Präferenzen:Mast Optionen:• 60 cm – spezielle Größe für flache Gewässer• 75 cm – All-round / Entry / Freestyle - Standardlänge für die meisten Wingfoiler auf Seen. Super für den Einstieg und sehr kompaktes verhalten bei Sprüngen und Rotationen für progressive Freestyler. Surf- und SUP-Foilen bei allen Könnensstufen in kleineren Wellen• 82 cm – All-round / Surf / Freestyle / Downwind - Unser neuer Allrounder-Mast für Wing Foiler, die nach dem perfekten Mix aus Kompaktheit zum Freestylen und gleichzeitig ausreichend Länge zum Wingen in Wellen suchen. Surf- und SUP-Foiler in mittelgroßen Wellen. Freestyle Windsurf Foiler• 90 cm – Freeride / Surf / Downwind - Wing Foiler, die nach extra Länge für Komfort in Wellen und größerer Dünung suchen. Standardlänge für Windsurf FoilerFuselage Optionen:• 68 cm – “Advanced” – Surf / Freestyle - Fortgeschrittene Wing Foiler, die ein manöverorientiertes Setup mit direkten Reaktionen und hervorragendem Pop für Sprünge suchen. Fortgeschrittene Surf- und SUP Foiler• 78cm – “All-round” – Entry / Freeride / Pump - Vom Wingfoil-Einsteiger bis zum Könner, mit der Option den Back Wing entsprechend des Fahrlevels zu positionieren. Surf-, SUP- und Pump-Foiler, die nach einem einfachen Setup mit guter Kippstabilität und hervorragenden Pump-Eigenschaften suchen• 90cm – “Windsurf” – All-round - Für Windsurf Foiler aller Könnensstufen, mit einem einfachen und stabilen Flug mit viele Kontrolle auch bei höherer Geschwindigkeit

Naish S25 Jet Foil Complete 2450 The Naish S25 Jet Foil Complete 2450 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performance To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system. Jet 2450 is ideal for riders +250 lbs Performance Features Jet 2450 Front Wing = Optimized early lift at low speeds Stabilizer 450 Back Wing = Early lift & intuitive turning 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response Construction Features Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts Jet 2450 - 3 x 30mm & 2 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant Tech Specs SizeFront Wing DesignAspect RatioWingspanProjected Surface Area 75 cm Jet 2450 4.1 39.4"/100 cm 380 in²/2450 cm²   Naish S25 Jet Foil Complete 2450

Unser Aero AL Set ist eine solide Basis für jeden, der ins Foilen einsteigt und ein beständiges Mast & Fuselage Set sucht, das weit in alle Disziplinen und auch höhere Können Stufen des Foilens hinein reicht. Die Verschraubungen lassen problemlos Updates auf neue Front- und Back Wings zu und sind vorwärts und rückwärts kompatibel mit den Fanatic Wings sowie den neuen Duotone Foils.  Fuselage:   LENGTH (CM) 66 76 90 SCREW INFOS 2X M8X35 2X M8X35 2X M8X35 DISCIPLINES ALLROUND WING, KITE, PRONE, SUP, PUMP, DOWNWIND ENTRY-ALLROUND WING, SUP, PRONE, PUMP, DOWNWIND ALLROUND WINDSURF CHARACTER MANEUVRABLE, GREAT GLIDE, GREAT CONTROL, GOOD POP PITCH STABLE, CONTROLLED, GREAT GLIDE - ADJUSTABLE STABILIZER OPTION BALANCED WITH ACCESSIBLE PERFORMANCE COMPATIBILITY WINGS DUOTONE AERO SLS WINGS / FANATIC AERO WINGS DUOTONE AERO SLS WINGS / FANATIC AERO WINGS DUOTONE AERO SLS WINGS / FANATIC AERO WINGS COMPATIBILITY MASTS DUOTONE AERO AL & AL QM MASTS (NOT SLIM AL) / FANATIC AL3.0 MASTS DUOTONE AERO AL & AL QM MASTS (NOT SLIM AL) / FANATIC AL3.0 MASTS DUOTONE AERO AL &

SURF / FREESTYLE / PRONE / KITESLS steht für Strong Light Superior und ist die Ausrüstung, die dich dazu befähigt, deine Grenzen zu überschreiten und kompromisslos nach Spitzenleistungen zu streben.Der DUOTONE Carve 3.0 SLS – maximale Agilität für alle Foiling-Disziplinen.Erlebe die nächste Generation der Carve SLS-Reihe – mit den bewährten Eigenschaften des Vorgängers und noch mehr Reaktionsfähigkeit für verschiedene Bedingungen und Fahrstile. Der Carve 3.0 SLS setzt neue Maßstäbe mit optimierter Pump- und Gleiteffizienz. In der Welle spürst du mehr Vortrieb und Geschwindigkeit, um mühelos vor der Welle zu bleiben. Schnelle Rail-to-Rail-Transitions ermöglichen präzise Richtungswechsel, während die verbesserte Pitch-Stabilität dir maximale Kontrolle bei hohen Geschwindigkeiten und kritischen Manövern gibt. Freestyle-Enthusiasten werden den reaktionsschnellen und vorhersehbaren Pop lieben, der präzise Manöver ermöglicht. Dank seiner Vielseitigkeit ist dieses Foil perfekt für Freestyle-, Prone-, Surf- und Kite Foiling – ein echter Allrounder! Unser neu abgestimmter Stabilizer PX ist die perfekte Ergänzung zum neuen Carve 3.0 und unterstützt ein sanftes und direkteres Fahrerlebnis mit außergewöhnlicher Beschleunigung, niedrigem Widerstand und intuitivem Kurvenverhalten. Der Carve 3.0 SLS bietet präzise optimierte Profile für jede Größe, während das fortschrittliche Carbon-Layup die perfekte Balance aus Leichtigkeit, Steifigkeit und Haltbarkeit gewährleistet. Kompatibel mit allen Aero AL- und AL 3BS-Fuselages, ist er in vier Größen – 800, 950, 1100 und 1300 – erhältlich und deckt eine breite Range an Fahrertypen ab. Erlebe die Agilität des DUOTONE Carve 3.0 SLS – das Foil, das deine Grenzen verschiebt und die Performance in jeder Foiling-Disziplin auf ein neues Level hebt. Stabilizer PX Unsere neuen PX-Stabilizer ersetzt unsere vorherige Reihe von P-Stabs. Die Stabs sehen fast identisch aus; das einzige, was wir geändert haben, ist die Struktur im Profil, vom Chord bis zu den Spitzen. Obwohl das unbedeutend erscheinen mag, hat unser Team tatsächlich festgestellt, dass diese kleine Anpassung fast jeden Aspekt der P-Stabs verbessert hat. Besseres pitch verhalten, mehr Manövrierfähigkeit und besseres Pumpverhalten. Die PX-Größen haben eine etwas kleinere Fläche als die P. PX160 ersetzt P165 PX175 ersetzt P180 PX195 ersetzt P200 Erwarten Sie etwas weniger Front Foot Pressure beim Wechsel von P zu dem etwas kleineren PX. Der PX passt perfekt zu unserer neuen Carve 3.0 Reihe, kann aber auch mit jeder anderen unserer Frontflügel verwendet werden: Glide, Glide 2.0, Carve, Carve 2.0, Whizz, besonders wenn Sie die allgemeine Leistung Ihres Foils für schnelles Wingen und Kitefoiling oder beim carven in größeren und schneller Wellen verbessern möchten.

AGILE FREESTYLE & SURF FOIL PERFORMANCE The CSF is built for advanced riders seeking ultimate agility, speed, and control in surf and freestyle foiling. Engineered for precision and responsiveness, it delivers lightning-fast acceleration, fluid carving, and high-end performance that lets you push your wing or kite limits with confidence. Designed with 3K twill carbon composite construction, the CSF achieves an exceptional balance of featherlight weight, stiffness, and strength. The moulded foam core keeps the structure lightweight yet durable, while the innovative Skeleton mast base plate removes unnecessary weight for maximum efficiency and direct feedback. The CSF’s hydrodynamic design ensures minimal drag, allowing quick, controlled turns and instant response to rider input. Its modular system provides full customisation—swap components to adapt your setup for surf, freestyle, or all-round performance. Materials 3K twill carbon composite construction Moulded lightweight foam core Skeleton mast base plate FOIL FEATURES Experience our experience. 3K Twill Carbon Construction Ultra-stiff and lightweight composite ensuring maximum strength, durability, and precise feedback. Hydrodynamic Design Minimal drag profile for fast acceleration, smooth carving, and effortless glide. Playful & Reactive Handling Delivers quick response and agility for advanced manoeuvres in surf and freestyle riding. Skeleton Mast Base Plate Optimised design reducing weight while maintaining stiffness and load transfer. Modular System Fully interchangeable components for a personalised setup tailored to your style and conditions. High-Performance Geometry Fine-tuned for expert-level control, speed, and dynamic foil response. Who It’s For Advanced surf and freestyle riders seeking top-tier performance, precision, and responsiveness to elevate their foil sessions to the next level.

JET FOIL RANGE:   Jet 1050 + 1250 Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 back wing, which gives the complete setup more intuitive turning and response for pumping. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong.   Jet 1650, 2000, 2450 The Jet 1650, 2000, and 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling. These wings are paired with the Stabilizer 450 back wing, which gives the complete setup more lift at lower speeds and is optimized for improved turning and pumping performance.

EFFICIENT / FAST / CARVE Die perfekte Kombination aus Geschwindigkeit, Fahrstabilität, Lift und Agilität erlauben schnelle Lernfortschritte und eine harmonisch ausgewogene Balance. DETAILS Die perfekte Kombination aus Geschwindigkeit, Fahrstabilität, Lift und Agilität erlauben schnelle Lernfortschritte und eine harmonisch ausgewogene Balance. Bei höheren Geschwindigkeiten besticht das 633 mit herausragender Spurtreue und einem schön direkten Fahrverhalten, wodurch Jibes und Tacks zu einem echten Hochgenuss werden. Durch den einzigartigen Inverted-Gull-Shape markieren die Carving-Eigenschaften und die dabei gefühlte Kontrolle über das Foil eine vollkommen neue Dimension an Fahrspaß, die man selbst erlebt haben muss, um die Faszination des Phantasm 633 in vollem Umfang zu begreifen. Die PFI-Wings wurden entwickelt, um dir das Optimum an Freeride-Performance zu bieten. Attraktive Geschwindigkeit, maximale Fahrstabilität, satter Lift und ein manöverorientierter Charakter, diese Aspekte zeichnen die PFI-Series aus. Die benutzerfreundlichsten und am leichtesten zu fahrenden Wings der Phantasm-Range. Lieferumfang:Phantasm PFI Series Front Wing, Rear Stabilizer, Fuse, Hardware (316 Stainless Steel Torx), Neoprene Wing Covers, Carrying Case. Fläche 1270 cm² Breite 633 mm Tiefe 264 mm Aspekt Ratio 3.2

  Save NOBILE ZEN HYDROFOIL PROBABLY THE MOST ADVANCED AND TESTED ALUMINIUM-CARBO COMPOSITE HYDROFOIL EVER MADE! - All-round- Freeride- Race   MAIN FEATURES: – easy to ride and manoeuvrable – properties typical for carbon products – high safety level – solid and stiff construction – steering precision – fully anti-corrosion seal makes the construction immune to unfavourable conditions, such as salt water.   Almost 15-month research on Hydrofoil was conducted by the most experienced team of Nobile engineers under the Care and management of Grzegorz Staszczuk, R&D Engineer and Dariusz Rosiak – the Nobile’s founder. Tomek Janiak – Nobile Rider and one of the world’s top Kite Formula competitors – was the project’s advisor and the main tester. The result is the product of the highest quality, based on the Human Concept philosophy. It’s probably the best aluminum hydrofoil on the market. We also wanted it to be user-friendly, safe and full disassembly, so you can pack it into a compact-sized luggage. We recommend our custom-made “check in bag” which meets the criteria of airlines in terms of the maximum size of registered baggage. We have called our hydrofoil Zen, because when you ride on it, your mind becomes free and your thinking clear as the water surrounding you. MAIN FEATURES:– easy to ride and manoeuvrable– properties typical for carbon products– high safety level– solid and stiff construction– steering precision– fully anti-corrosion seal makes the construction immune to unfavourable conditions, such as salt water. FUSELAGE - ALUMINUMLength (cm): 64The Fuselage is made of aluminum used in aviation industry. Milled and turned in lab conditions on CNC machines. Carefully selected cross sections and well-designed slots securing wings and mast minimize resistance, while increasing durability and rigidity of connection with other components. The keel is anodized in order to protect it against the salt water.FUSELAGE - ALUMINUM-CARBONLength (cm): 64This Fuselage is made of carbon and aluminium used in aviation industry. Milled and turned in lab conditions on CNC machines. Carefully selected cross sections and well-designed slots securing wings and mast minimize resistance, while increasing durability and rigidity of connection with other components. The keel is anodized in order to protect it against the salt water.MASTLength (cm): 35 | 60 | 86 | 96The aluminium mast is extruded from the material used in the aviation industry. It is extremely light and stiff to the maximum. Thanks to the non-drag profile, it has very low resistance in the water.MOUNTING PLATFORMIt’s a pivotal point of the whole construction, connecting the hydrofoil with the board. Made of high-quality aluminum used in aviation industry to make it super-stable and maximally durable. Redesigned shape makes it lighter. Added slots for mounting instead of holes create possibility to set position in order to achieve perfect balance on the board. It makes also possibility to attach hydrofoil to boards with holes system 160x90 and 165x90.WINGAll-round: surface – 815 cm2 | span – 55 cm | aspect ratio – 3,7.Freeride: surface – 700 cm2 | span – 56 cm | aspect ratio: – 4,5.Race: surface – 528 cm2 | span – 60cm | aspect ratio – 6,8.Wings are built of ultra-durable and stiff G10 composite milled with the use of super-precise CNC machines and polished to minimize the water resistance. The back flap is universal for both wings.All-round wingExtremely stabile and easy to control. It gains lift quickly which makes it useful also for the beginners. Optimized for medium and high speed.FreerideNew shape of freeride wing guarantees fitted surface parameters and used profiles provide a freedom of moves in wide spectrum of weather conditions.RaceThanks to the big extension the resistance is reduced to the absolute minimum. Optimized for maximum speed.FINThe 40 mm Nobile fin is made of G10 material and serves as an extra stabilizer. You can use other sizes of Nobile G10 fins as well.  

GRAVITY CARBON 2200 FLY IN FULL CONTROL The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential. Smooth take-off Stability and lift Area: 1760 cm²Span: 90 cmAspect Ratio: 4.6Weight: 1.95 kg (wing only)

Pod Foil Set     Included in the Set– 27″ Aluminum mast with 20cm reinforcement block– Carbon Composite Glider 125 Wing Set (with Wing Covers)– Standard Aluminum Fuselage– Standard Collar– Titanium Coated M8 x 1.25 Hardware for wings, fuselage and collar– Track Nuts and Sliders for Board– Plastic board transition plate– 5mm Hex Drive Allen Key– Tube of Grease Hardware Details– M8 x 1.25 x 24mm x 3 (Front Wing)– M8 x 1.25 x 16mm x 2 (Rear Wing)– M8 x 1.25 x 40mm x 2 (Fuselage)– M8 x 1.25 x 28mm x 6 (Collar and Track Hardware)  

The Glider HA is our newly designed pump foil that specializes in dock starts and low-effort, light wind downwinding. The large wingspan and high aspect ratio foils provide high lift and low stall speed, making it possible to effortlessly pump and glide for long distances. In order to accommodate this larger wingspan, a new "Hammer Head" fuselage front wing connection has been designed to provide a very stable connection, instant response, and reduces any flex. The Dual expansion foam core construction with UD and 3K carbon layup provides ultimate stiffness at low weight. Note: The Glider HA Front Wing is only compatible with the Glider HA Fuselage. Large Wingspan FoilProvides high lift at low speeds and maximized glide.Hammer Head Joint Connection to Fuselage Creates an ultra-stiff connection between the fuselage and the front wing, providing more lateral support that is needed to accommodate the wide wingspan. 100% Prepreg 3K Carbon Outer Layer Satin FinishDurable and lightweight construction.Dual Expansion Core Construction Molded lightweight layup utilizing UD and 3K carbon Laminate.   LARGE WINGSPAN FOILProvides high lift at low speeds and maximized glide.HAMMER HEAD JOINT CONNECTION TO FUSELAGECreates an ultra-stiff connection between the fuselage and the front wing, providing more lateral support that is needed to accommodate the wide wingspan.DURABLE AND LIGHTWEIGHT CONSTRUCTION100% Prepreg 3K Carbon Outer Layer Satin FinishDUAL EXPANSION CORE CONSTRUCTIONMolded lightweight layup utilizing UD and 3K carbon Laminate.

ALLROUND FOIL SETThe ALU H-Flight Foil is a high-performance hydrofoil designed for riders of various skill levels. Whether you’re a beginner or an experienced rider, this hydrofoil system provides a smooth, stable, and exciting ride.SPECS:Front Wing 725cm²Rear Wing 262cm²Mast 80cm Key Features: Lightweight and Durable: The ALU H-Flight Foil features a strong aluminum mast, making it both lightweight and durable. The mast ensures superior strength without compromising performance. Aerodynamic Design: Its hydrodynamic shape is engineered to reduce drag, providing excellent lift and stability. The design ensures smooth transitions in the water, making it ideal for both calm and rough conditions. Precise Control: With its adjustable mast plate, riders can fine-tune their foil setup for optimal performance based on their weight and riding style. This adjustability allows you to find the perfect balance of speed, lift, and stability. Stable Lift: The ALU H-Flight Foil provides smooth, consistent lift, allowing riders to stay above the water surface with ease. This makes it perfect for exploring new maneuvers or simply cruising at a steady pace. Versatile Application: Whether you’re kiteboarding, windsurfing, or using it for other water sports, the ALU H-Flight Foil is versatile enough to handle different conditions, delivering a reliable and enjoyable ride. Easy Assembly: Designed for quick and easy setup, the foil comes with clear instructions for hassle-free assembly and disassembly. The components are made to last, providing a long-lasting performance for multiple sessions. Conclusion: Ideal for all riders looking for a hydrofoil that delivers exceptional stability, control, and smooth performance, the ALU H-Flight Foil is your go-to choice for water sports. Experience a new level of excitement and precision with this top-tier foil.

SETFoil Spirit Mast AL 75 2.0 + Fuselage AL 70 + BAG

Complete Foil Set with Aluminium.includes all Screws, Nuts and Tools for assempling the foilThis foil is perfect for Freeride Winging or Pumpfoiling.the 1700 foil for lighter People or stronger windThe 1950 for heavier people or lighterr wind ENSIS TRACKSTER 1700Wing size: 2.5 – 5.2 m2Rider weight: 55- 85 kgWind range: 12 – 28 knts Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage ENSIS TRACKSTER 1900Wing size: 3.5 – 6.2 m2Rider weight: 65 – 100 kgWind range: 12 – 20 knts Easy take off – high liftSmooth riding – great stabilityRobust – Alu mast and fuselage    

Set Includes: Front Wing - 1150 - PNG - Carbon 1150mm x 180mm / 1778cm² / High Aspect 475 Carbon Rear Hydrofoil wing 475 mm x 68mm  S-Series - Fuselage - Standard Length - 765mm 765mm 19mm - AXIS K/S-Series Freeride Foil Mast 75cm 75cm / 29.53" Fuselage to 19mm Mast Adapter / Doodad To Fit 19mm Mast 19mm K/S-Series Foil Base Plate To Fit 19mm Mast One STAINLESS Screwset and Toolset for All Black Series, S-Series Stainless - Standard PUMP AND GLIDE Our ultimate pump and glide wing series. There’s no other wing like the Pump and Glide. A unique combination of medium and high aspect, thinner foil and high camber, PNG gets you up easily – then keeps you going, and going, and going. The foil section design also has a high stall angle, which means it performs exceptionally at slower speeds.Dock foilers need look no further. This is your foil.PNG is a firm favourite with SUP foilers too, maximising your ability to pump back out and foil straight onto the next wave. Lots of our AXIS customers have also learned to wing foil on this design. However, the same characteristics that make it a great pumping foil will also hold back its top speed.              

950 DESCRIPTION The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk. The BLAZE ALU 950 addresses the need of riding at a higher speed and perform radical turns. The 950 front wing is super responsive, turns on a dime, and you can really control the foil all the way from the pocket to the steep section of the wave. For wing foiling it is a mind blowing for skilled riders with plenty of performance to have fun with. Ideal for foiling with consistent waves size (+1 mt) or in flatwater with medium to stronger wind. DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 BLAZE FULL CARBON FRONT WING 79/950 with PADDED COVER Y27 BLAZE FULL CARBON REAR WING 38/195 with PADDED COVER Y27 FUSELAGE 66 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET 1250 ESCRIPTION The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk. -The BLAZE ALU 1250 is the most versatile in the range. All in one use for wing, surf, kite foiling. Extremely efficient to pump and ideal for connecting waves. It adapts to various conditions whether it is waves or flat water. Explore its potential, fun is guaranteed. DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 BLAZE FULL CARBON FRONT WING 86,5/1250 with PADDED COVER Y27 BLAZE FULL CARBON REAR WING 41/215 with PADDED COVER Y27 FUSELAGE 66 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET 1550 DESCRIPTION The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk. -The BLAZE ALU 1550 gives a pure effortlessly feel. You can glide for long distances enjoying the pleasure of pumping the foil, surfing the waves or having a blast ride with the wing. Appreciate its incredible maneuverability and smooth efficient flight. Use it for wing, surf, downwinders and kite. For medium to heavy weight riders.   DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 BLAZE FULL CARBON FRONT WING 97,5/1550 with PADDED COVER Y27 BLAZE FULL CARBON REAR WING 41/215 with PADDED COVER Y27 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET 1850 DESCRIPTION The new BLAZE set runs with the evolution of foiling. Its extraordinary efficiency and glide allow you to do everything effortlessly whether it is Wing, Surf or Kite foiling.The Blaze wings are designed to bring you to the peak of your performance, with a 6.5 aspect ratio you gain the speed but also the maneuverability you are dreaming of. The new rear wings maximize acceleration and control.The Blaze wings fit inside a well-tested and proven fuselage to mast system that offers the best compromise of stiffness and lightness. Our aluminum mast is 100% safe with new added side screws which ensure that every single component of the foil is 100% safe with no risk of breakage or loss. With this set you can truly push yourself further without any risk. -The BLAZE ALU 1850 is for heavier riders that want to mix more lift and great glide. The most accessible in the Blaze range and enjoyable for its versatility. You can wing, ride downwind, dock start or wake foil. A pure thrill to give you hours of excitement in the water. DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 BLAZE FULL CARBON FRONT WING 103,5/1850 with PADDED COVER Y27 BLAZE FULL CARBON REAR WING 45/250 with PADDED COVER Y27 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET

SLS steht für Strong Light Superior und ist die Ausrüstung, die dich dazu befähigt, deine Grenzen zu überschreiten und kompromisslos nach Spitzenleistungen zu streben. Unser Aero SLS Masten in Kombination mit AL 3BS Fuselages gehören zu den stärksten Setups am Markt. Mit kräftiger Strukturstärke, bombenfesten Verschraubungen und geringem Gewicht bieten diese Mast/Fuselage Sets wahnsinnig direkte Fahrleistung selbst bei Front Wings mit extrem großen Spannweiten. Die schlanken und gewichtsoptimierten AL 3BS Fuselages sind die perfekte Kombination mit unseren SLS Masten und vereinen sehr geringen Strömungswiderstand mit direkter und außergewöhnlich hoher Fahrleistung! FUSELAGE 60 66 74 90 LENGTH (CM) 3X M8X50 3X M8X50 3X M8X50 3X M8X50 SCREW INFO ADVANCED WING, PRONE, KITE ALLROUND WING, KITE, PRONE, SUP, PUMP, DOWNWIND ENTRY-ALLROUND WING, SUP, PRONE, PUMP, DOWNWIND ALLROUND WINDSURF DISCIPLINES ULTRA MANEUVRABLE, INSTANT POP MANEUVRABLE, GREAT GLIDE, GREAT CONTROL, GOOD POP PITCH STABLE, CONTROLLED, GREAT GLIDE BALANCED WITH ACCESSIBLE PERFORMANCE CHARACTER DUOTONE AERO SLS WINGS / FANATIC AERO WINGS DUOTONE AERO SLS WINGS / FANATIC AERO WINGS DUOTONE AERO SLS WINGS / FANATIC AERO WINGS DUOTONE AERO SLS WINGS / FANATIC AERO WINGS COMPATIBILITY WINGS DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS DUOTONE AERO D/LAB & SLS MASTS / FANATIC CARBON MASTS