1750
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible!
Recommended for novice riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil.
Recommended for novice heavy weight riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
2022/23 Naish Jet Foil Series for maximum performance
There are three versions:
Jet Foil HA (High Aspect) Semi Complete (=no mast)
Jet Foil MA (Medium Aspect) Semi complete (=no mast)
Jet Foil Standard (Low Aspect) Semi Complete (=no mast)
Here are the main differences between these models.
High Aspect (HA) Foil:
High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio).
These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance.
High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio.
Medium Aspect (MA) Foil:
Medium aspect foils strike a balance between the characteristics of high and low aspect foils.
They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability.
Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control.
Low Aspect (LA) Foil:
Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio.
These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed.
Low aspect foils are often chosen for learning to foil and for cruising at lower speeds.
When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use.
The high number (for example 1600) gives you the surface of the front wing in cm2.
Scope of delivery: Jet front wing + EVA cover Stabilizer Jet HA + EVA cover Fuselage Carrying case Torx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
HIGHLIGHTS
Sonar CF72 or CF85 Mast
Easy recovery from surface breaching
Carbon Fuselage 600mm
WHERE IT THRIVES
Wing, SUP or Surf foiling
WHAT RIDERS SAY
"Nothing beats the feel of carbon." - UIi Sommerlatt
Beyond Limits
Insane response. Incredible performance. Our new highest quality pre-preg carbon modular foil edition provides a stiffer, more direct feel and more immediate feedback. Engineered with increased strength for higher loads, the Carbon Edition excels across all foiling disciplines. The refined one-piece mast design is tapered for optimal load transfer and lower surface friction, and features our unique GeoLock system. Comes complete with our new high-strength 600m pre-preg carbon fuselage and S01 Stabilizer for a durable, corrosion-free foil with great pumpability and a sporty feel with earlier take-offs. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions.
Sonar CF72 or CF85 Mast
New highest quality pre-preg carbon mast for a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction. Refined one-piece design - strong, durable and corrosion-free.
Easy recovery from surface breaching
In perfect harmony with any Front Wing, our dihedral-shaped carbon pre-preg rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy surface breach-recovery.
Carbon Fuselage 600mm
New high-strength 600m pre-preg carbon fuselage weighs ~50% less than the A600, with equal strength and stiffness. Strong, durable and corrosion resistant. Improves pumpability. Earlier take-offs.
DETAILS
SONAR CF72 OR CF85 MAST
New highest quality pre-preg carbon mast for a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction. Refined one-piece design for a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. choice across all disciplines. The longer CF85 mast increases overall ride performance in choppy conditions.
GEOLOCK LOAD BEARING CONNECTION
Engineered to last, our unique GeoLock tapered geometry locking system provides a more effective load-bearing connection between the Mast and Fuselage, locking them together, so they feel like one piece. Screws engage the GeoLock while the load transfer now takes place over the full cross-section of the mast profile, allowing for a more efficient load distribution and longer-lasting connection. Patent-pending.
EASY RECOVERY FROM SURFACE BREACHING
In perfect harmony with any Front Wing, our dihedral-shaped carbon pre-preg rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy surface breach-recovery. The Stabilizer's positioning on top of the Fuselage allows for a clean, undisturbed approaching flow. Surface piercing of the Stabilizer is not a problem, as the Front Wing sits deeper in the water and is still fully submerged, giving you that extra time to react and adjust your ride height.
INDUSTRY-STANDARD 165X90MM BOLT PATTERN
The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern. Foil Board and foil to board attachment screws sold separately
CARBON FUSELAGE 600MM
New high-strength 600m pre-preg carbon fuselage weighs ~50% less than the A600, with equal strength and stiffness. Strong, durable and corrosion resistant. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. Features GeoLock. Fits all Carbon and Aluminium Sonar Masts.
MODULAR FOIL SYSTEM
Customise your ride with our fully interchangeable foil parts to explore multiple disciplines and riding styles all with one setup.
SUPPLIED WITH SONAR TRAVEL BAG
Stow your Sonar Quiver safely in between sessions with our Heavy Duty 600D Padded Travel Bag. Roomy enough inside to fit the complete Sonar Foil set, including all three wings and three masts inside their individual covers. The bag also has enough depth to leave the Board Adaptor connected to the mast, making your foil packdown faster. Designed with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete Foil Edition.
FOIL TO BOARD MOUNTING HARDWARE SUPPLIED WITH NORTH FOIL BOARDS
FRONT WINGS SOLD SEPARATELY
INDUSTRY-STANDARD 165X90MM BOLT PATTERN
The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern. Foil Board and foil to board attachment screws sold separately
Flat, loose and fast, the new S208 Stabilizer is another high performance upgrade to the Sonar Foil System for experienced riders. The S208 has a higher aspect ratio than the S210, which means less drag, and the flatter rondure (front view) enables more manoeuvrability. As we’ve increased our front wing range, we’ve needed to match the lift force of the front wing with the stabilizer. While your front wing creates vertical lift, your stabilizer has a downward acting force, which prevents the front wing from nose-diving. A larger stabilizer translates into more front foot pressure, while a smaller stabilizer equals less front foot pressure. The North stabs are mounted on top of the fuselage, which helps them to avoid turbulence from the flow of the front wing, creating a smoother ride. This top mounting also gives the rider an early breach warning - the stab pierces the water surface first, giving you a better chance of recovery before your front wing gets too high. Like the Front Wings, all Sonar Stabilizers are pre-preg carbon construction, ensuring optimal stiffness and direct performance. The thin profile section reduces drag, while the material properties help maintain structural integrity and rigidity. Stabs have a huge influence on performance. As you progress to smaller wing sizes, we recommend changing to a smaller stabilizer to be more manoeuvrable. Experienced riders will really feel the difference. A new tail can have a big impact on your style.
Features
Clean undisturbed flow
Flat
loose and fast
Easy breach recovery
Thinner profile
Higher aspect ratio
Less surface friction for better glide
Materials
Carbon Pre-preg
Versatile and progressive, the IC6 300 stabilizer is the perfect match for the IC6 950 and GRAVITY FCT front wings. Equipped with generous winglets, this stabilizer offers fantastic control with enough surface area that will help you feel fully confident in all situations.
Versatile, intuitive, and predictable
Large range of use
Built with the IC6 technology, it is very durable and designed to be securely mounted on F-ONE fuselages. Its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you maneuver your foil more easily.
Ref. 77207-0301
Recommended Plane:
FUSION ALLOY TOP PLATE MKII
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast.
Features:
Precision CNC machined aircraft grade, anodized 6061-T6 aluminium
Incredible torsional stiffness
All-around Freeride Kite Foil
Standard Mast Size: 90 cm | Aspect Ratio: 6.5 | Wingspan: 25.3"/64.2 cm | Projected Surface Area: 600 cm2
Forgiving and user-friendly, the Thrust Kite Foil Complete delivers a super smooth foiling experience for anyone from beginner to advanced to cruise on. Its segmented front wing combines the stability of a dihedral shape with the early take-off and low speed lift of an anhedral wing. Tuned for balance, this foil setup reduces pumping time by helping riders quickly find a stable plane and lock in, while the higher aspect ratio lengthens the glide. A large sweet spot delivers ample stability for a more natural feel that encourages riders to move more freely and gain the confidence to progress. Smooth gliding and incredibly intuitive, this effortless setup frees your attention to enjoy the experience and expand your abilities.
View the Assembly Instructions HERE
The Hover Kite 130, 155, and 160 foilboards have a shallower track system and therefore require the shorter screws as supplied with the board. These boards CANNOT be used with the longer screws that come with the Naish Thrust foil.When pairing all other Naish Hover Foilboards with your Naish Foil, use the screws supplied with the foil. Reference which screws to use HERE
WHAT'S NEW
Front Wing–50% Lighter
Back Wing
Monocoque Ultra Robust Back Wing Construction
Heavy-duty Fuselage
Standard Plate Connection
Stealth Stripes
CONSTRUCTION
Aircraft Grade High Precision CNC Cut Fuselage
Aircraft Grade Extruded Aluminum Mast (All aluminum masts will receive a custom wet-sanded Speed Finish)
Carbon/Glass PrePreg & Hi Mod Foam Core Front Wing Construction
Carbon/Glass PrePreg & Hi Mod Foam Core Monocoque Back Wing Construction
316 Marine Grade Stainless Steel Hardware
COMPLETE KIT INCLUDES
Front Wing KS 2
Back Wing KS 2
Mast 90 cm/Aluminum
Fuselage KS/Surf
Foil Assembly Screw Set
Standard Plate
Standard Plate Screw Set
Foil Cover
Continuing the huge success of the AXIS 460 Carbon rear wing, was not an easy task. We kept the same chord, foil section, and wingspan of the original 460, but added a splash of turn down on the tips, similar to the Progressive rears.
This created a rear wing that is fast, stable, pumps unreal, and likes to turn with good carving performance. The perfect setup for all dock start, flat water pump, downwinding, wake, lightwind winging, and more.
If you don't have the AXIS 460 v2 rear wing in your bag of rear wings, you are certainly missing out. The AXIS 460 v2 carbon rear wing comes with its own AXIS cover, so your new AXIS wing is nicely protected.
We updated the graphics on this rear wing to show all the technical details you might be interested in (plus some):
Wingspan: 460mmMax Chord: 60mmTrue Area: 229.90cm2Aspect Ratio: 9.3Volume: 82.82cm3
ALLROUND (FREERIDE / FREESTYLE / FREESURF / PRONE / WIND)
Der Aero Free ist unser Alleskönner.
Unsere drei neuen größeren Größen 1500, 1750 und 2000 sind die perfekten Wings für Einsteiger und Aufsteiger.
Ihre stabilen Flugeigenschaften, der frühe Lift und die enorme Endgeschwindigkeit machen sie zu den idealen Wings für schnellen Fortschritt.
Die drei kleineren Größen 800, 1000 und 1250 sind bereits seit einem Jahr auf dem Markt und haben sich als leistungsstarke Allrounder etabliert.
Der Aero Free liegt in Bezug auf Gleitleistung und Manöverfähigkeit genau in der Mitte unserer neuen Glide und Carve 2.0 Reihe. Er hat eine etwas höhere Aspect Ratio als der Carve 2.0, aber ein anderes Profil und eine andere Outline, die eher auf eine gute Mischung aus Manövrierbarkeit, Gleiten, Pumpen und allgemeiner Benutzerfreundlichkeit abzielt.
Der Aero Free deckt alle Disziplinen ab: Wing, Prone, SUP und Windsurf Foiling. Der Name verrät es bereits, dieser Wing ist nicht an eine bestimmte Disziplin gebunden, er fühlt sich bei sämtlichen Bedingungen und Könnensstufen wohl - egal ob Freeride, Freestyle, Freerace, Surf oder Downwind. Mit einem Aspektverhältnis zwischen 6.0 für das größere 2000er und 7.3 für das kleine 800cm2 sind diese Front Wings genau richtig, um die Grundlagen zu erlernen und dein Foil-Können in einer Vielzahl von Bedingungen zu beschleunigen - vom Flachwasser-Cruisen bis hin zu Sprüngen und Foilen in den Wellen. Mit seiner verspielten Outline und seinem widerstandsarmen Profil fühlt er sich aufregend und schnell an, bietet aber dennoch viel Leichtigkeit und Kontrolle. Es gibt eigentlich keine Bedingungen, in denen sich dieser Wing nicht zu Hause fühlt!
Stabilizer C
Unsere Stabilizer C haben sich in den letzten Jahren in Kombination mit sämtlichen Front Wings bestens bewährt. Sie sind das, was man als "traditionell" bezeichnen würde mit einer mittleren Aspect Ratio, flach in der Mitte und ein subtiles Winglet zu den Wing Tips hin.
Ein gut getestetes und bewährtes Design, das hervorragend mit unseren Aero Free SLS und Aero Lift SLS Front Wings zusammenpasst.
Die C-Serie steht für Kontrolle. Bei ihnen geht es darum, den Fahrer auf seiner Flugbahn zu unterstützen und dem Foil Kontrolleigenschaften zu verleihen, ohne den Spaßfaktor einzuschränken.
Obwohl sie einen stabilen Flug gewährleisten, sind sie perfekt für sanfte Turns auf der Welle.
Mit Hilfe der brandneuen dünnen Shims kannst du den Anstellwinkel deines Stabilizers in Schritten von +/- 0,3 Grad anpassen, passend zu deinem Fahrstil oder den aktuellen Bedingungen.
SURFACE (CM / IN²)
800 / 124.0
1000 / 155.0
1250 / 193.8
1500 / 232.5
1750 / 271.3
2000 / 310.0
SPAN (CM / IN)
78 / 30.8
84 / 33.2
90 / 35.6
95 / 37.5
102 / 40.3
110 / 43.5
ASPECT RATIO
7.2
6.8
6.4
6.0
6.0
6.0
REC. STABILIZER
C 216
C 216
C 250
C 250
C 250
C 300
SCREW HOLE 1 (CRBN FL / ALU FL)
M8X30 / M8X25
M8X30 / M8X25
M8X30 / M8X30
M8X35 / M8X30
M8X35 / M8X30
M8X35 / M8X30
SCREW HOLE 2
M8X25
M8X30
M8X30
M8X30
M8X30
M8X30
SCREW HOLE 3 (CLOSEST TO MAST)
M8X25
M8X30
M8X30
M8X30
M8X30
M8X30
REC. TORQUE
15 NM
15 NM
15 NM
15 NM
15 NM
15 NM
HIGHLIGHTS
Carbon 850 Front Wing
Carbon Pre-Preg Stabilizer
GeoLock
WHERE IT THRIVES
Choppy conditions and light wind
WHAT RIDERS SAY
"The Sonar Foils are surprisingly stable. When the wind slows down, usually a foil wants to drop down, but I like how I can pump the foil to keep going until I reach the next gust." - Bruna Kajiya
The Forgiving Foil with No Limits
Your ultimate Freeride Foil setup. A forgiving and well-balanced ride, with amazing performance at the top and bottom end speeds. The Sonar Freeride Edition, with 85cm Mast and 850 Performance Freeride Front Wing, holds lift through gybes and tacks without stalling. This well-balanced Foil System allows easy breach recovery and helps progress your foiling experience to the next level. The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern.
Carbon 850 Front Wing
Lightweight carbon sandwich construction with optimised profile and rounded outline for a playful and smooth ride without losing top speed thrills.
Carbon Pre-Preg Stabilizer
In perfect harmony with the Front Wing,our dihedral-shaped rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy recovery from surface-breaching. The Stabilizer's positioning on top of the Fuselage allows for a clean, undisturbed approaching flow. Surface piercing of the Stabilizer is not a problem, as the Front Wing sits deeper in...
GeoLock
Engineered to last, our unique GeoLock tapered geometry locking system provides a more effective load-bearing connection between the Mast and Fuselage, locking them together, so they feel like one piece. Screws engage the GeoLock while the load transfer now takes place over the full cross-section of the mast profile, allowing for a more efficient load distribution...
DETAILS
MODULAR SYSTEM
Customise your ride with our fully interchangeable foil parts to explore multiple disciplines and riding styles all with one setup.
CARBON 850 FRONT WING
Lightweight carbon sandwich construction with optimised profile and rounded outline for a playful and smooth ride without losing top speed thrills.
MAXIMUM FREERIDE PERFORMANCE
An ideal front wing for Kite Foiling and Tow-In Surf Foiling. Carries the lift through all manouevres and lets you step up your foil game with ease.
ANHEDRAL WING PROFILE
Allows for a more agile flight mode and roll stability during maneuvres.
OPTIMISED LOW-DRAG FOIL SECTION
Thrilling top end speeds combined with unbelievable low stall speed.
CARBON PRE-PREG STABILIZER
In perfect harmony with the Front Wing,our dihedral-shaped rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy recovery from surface-breaching. The Stabilizer's positioning on top of the Fuselage allows for a clean, undisturbed approaching flow. Surface piercing of the Stabilizer is not a problem, as the Front Wing sits deeper in the water and is still fully submerged, giving you that extra time to react and adjust your ride height.
BREACH RECOVERY
The Stabilizer's positioning on top of the Fuselage allows for a clean, undisturbed approaching flow and easy breach recovery. Surface piercing of the Stabilizer is not a problem, as the Front Wing sits deeper in the water and is still fully submerged, giving you that extra time to react and adjust your ride height.
HYDRODYNAMICALLY-OPTIMIZED FUSELAGE
CNC-machined anodised aeronautical grade 6061-T6 aluminum Fuselage. Hydrodynamically optimised shape for minimum resistance.
85CM ALUMINIUM KITE MAST
Ideal for Freeride foiling and increases overall ride performance in choppy conditions. This Mast length is perfect to heel over more, fly the kite lower and further power up the foil system for a more controlled high speed ride. It is also more forgiving in rougher conditions. Strong and light, the 85cm Mast is constructed from the highest quality aircraft grade 6061-T6 Anodised Aluminium, with a balanced section profile for optimised strength to weight.
GEOLOCK
Engineered to last, our unique GeoLock tapered geometry locking system provides a more effective load-bearing connection between the Mast and Fuselage, locking them together, so they feel like one piece. Screws engage the GeoLock while the load transfer now takes place over the full cross-section of the mast profile, allowing for a more efficient load distribution and longer-lasting connection.
BOARD ADAPTOR
The Sonar Foil System is connected to the board by a lightweight CNC-machined aluminium Board Adaptor with a tapered geometry locking connection that engages with the mast. Fusing Board Adaptor and mast together to build one union for optimum load transfer and a stronger, more direct feeling and steering impulse when foiling.
165X90MM BOLT PATTERN
The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern.
SUPPLIED WITH SONAR TRAVEL BAG
Stow your Sonar Quiver safely in between sessions with our Heavy Duty 600D Padded Travel Bag. Roomy enough inside to fit the complete Sonar Foil set, including all three wings and three masts inside their individual covers. The bag also has enough depth to leave the Board Adaptor connected to the mast, making your foil packdown faster. Designed with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete Foil Edition.
Insane response. Incredible performance. Our highest quality pre-preg carbon modular foil edition provides a stiffer, more direct feel and more immediate feedback. Engineered with exceptional stiffness for all disciplines, the CF Edition is made from lightweight and durable carbon pre-preg components and has a reduced swing weight for an agile, dynamic and direct feel, and great pumpability. The refined one-piece mast design is tapered for optimal load transfer and lower surface friction, and features our unique GeoLock system. The longer CF85 mast increases overall ride performance in choppy conditions. The CF72 mast is ideal for shallower waters, prone surf foiling and towing. For 2022 we’ve added stability, performance and efficiency with the 700mm Carbon Pre-Preg Fuselage and new S270 Carbon Pre-preg Stabilizer.
Carbon CF72 or CF85 Mast with cover, C700 Fuselage, S270 Stabilizer with cover, Tool Kit, Sonar Fuselage Screw Pack B (M8x35 Screws, M8 Flat Washers), Sonar Stabilizer Screw Pack C (M8x16mm)*, Sonar Travel Bag
Features
Sonar CF85 or CF72 Mast
GeoLock Load Bearing Connection
NEW S270 Carbon Stabilizer with easy breach recovery
Industry-standard 165x90mm bolt pattern
C700 Carbon Fuselage
Modular foil system
Supplied with Sonar CF Edition Travel Bag
Front Wings Sold Separately
Foil to board mounting screws sold separately
FUSION CARBON HOLLOW MAST
HIGH PERFORMANCE - LIGHT WEIGHT
SIZES: 74 / 84 / 94 CM
The all-new Hollow Mast system is yet another example of the state of the art foil program from Cab Design Works. It nods to the critical & complete design approach of the team to view every foil component individually with a view to improve stiffness across the entire platform. It implements a bladder molded construction with strategic layering of carbon as far to the outside as possible. This culminates in our stiffest ever mast to front wing connection. This reduction in flex eliminates any lag in the turn and transfers energy while pumping seamlessly through to the front wing.
Features:
Optimized airfoil for low drag to stiffness ratio
TE scallop for improved turning and efficiency
Integrated high modulus mounting plate
Bladder molded, hollow mast construction for superior skin compression, providing ultimate rigidity
Premium high modulus prepreg carbon fiber construction
Barrel Nut compatible(x-series MkII and H-series MKII)
Tapered Fit
Mast Guide:
Das Speedster Combo ist ein leicht zu kontrollierendes Foil und der ideale Begleiter, um schnell Fortschritte zu erzielen. Dank der zwei verschiedenen Mastlängen sind sowohl hohe Geschwindigkeiten als auch exzellente Stabilität erlebbar.
HARDFACTS
RIESIGER GESCHWINDIGKEITSBEREICH, GEEIGNET FÜR VERSCHIEDENSTE FAHRLEVEL.
EINZIGARTIGE WINGLETS FÜR EXAKTE SPURTREUE UND VERBESSERTEN DREHRADIUS
HOHER LIFT UND GERINGE STALL-ANFÄLLIGKEIT VEREINFACHEN WENDEN UND HALSEN
ÄUSSERST LANGLEBIGE FLÜGEL UND FUSELAGE AUS CARBO
WINGLETS VERBESSERN NICHT NUR STABILITÄT BEIM GERADEAUSFAHREN, SONDERN AUCH SPURTREUE IN KURVEN
ZUSÄTZLICHER KEIL FÜR DEN HINTERFLÜGEL VERBESSERT KONTROLLE BEIM AUFSTEIGEN DES FOILS
Exceptional glide. Our new thinner profile and higher aspect ratio carbon stabilizers offer reduced resistance and a more efficient outline. The S270 is your go-to for all round kite, wing and surf performance, offering optimal balance, speed, efficiency and control. Pair the S210 with a smaller front wing for high-speed performance and a more agile feel. Pair the S320 with a larger front wing for early planing, greater balance and stability.
Features
Clean undisturbed flow
Easy breach recovery
Thinner profile
Higher aspect ratio
More efficient outline shape
Less surface friction for better glide
Materials
Carbon Pre-preg
JET HA SEMI-COMPLETE
Expert Performance Foil Surfing/Downwind Foiling/Wing-Surfing
Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer, and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles — the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To complement the high-end performance of these new wings, the complete foils feature a new high aspect stabilizer that emphasizes pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input.
Learn More About the New Fuselage & Mast System HERE
SET INCLUDES
Jet HA Front Wing
Stabilizer HA
64 cm Fuselage
5x 20 mm M6//4x 30 mm M6 + T Nuts
EVA Wing Covers
Carry Case
CONSTRUCTION FEATURES
100% Pre-preg 3K High Gloss Carbon Fiber Front Wing and Stabilizer
CNC Precision Cut Lightweight Aluminum Fuselage with Corrosion Resistant Stainless Steel M6 Helicoils for the Front Wing and Stabilizer Connection
Stainless Steel M6 Torx T30 Hardware for all Screwed Connections
Front WingAspect RatioWingspanProjected Surface AreaStabilizerFuselage
Jet HA 1040
7.9
34.3"/87 cm
161.2 in²/1040 cm²
Jet HA 220
64 cm
Jet HA 1240
7.2
37.2"/94.5 cm
192.2 in²/1240 cm²
Jet HA 280
64 cm
Jet HA 1400
6.9
38.6"/98 cm
217 in²/1400 cm²
Jet HA 280
64 cm
Jet HA 1800
5.6
39.4"/100 cm
279 in²/1800 cm²
Jet HA 310
64 cm
Jet HA 2140
5.4
42.3"/107.5 cm
331.7 in²/2140 cm²
Jet HA 310
64 cm
The rear Stabilizer’s main role is to maintain a level and stable flight path. But conditions and user preference may change what stabilizer angle feels the best (aka the sweet spot). Shimming changes the angle of attack (AOA) and controls the amount of downforce the stabilizer creates on the overall foil system - to increase the stabilizer AOA and front foot pressure, add positive shim. The smallest tweak in the AOA can improve comfort, reduce fatigue, change the cadence of your pump or the turning radius of your carve and increase/decrease your front and rear foot pressure without changing your foot position. With the Sonar Shim Kit you can stack multiple shims, from our base setting it covers from -0.5 to +2.5 degrees. Finetune the way your foil system performs and change the way you ride. You’re in control.
1x -0.5 Deg Shim, 1x 0.5 Deg Shim, 2x 1 Deg Shim
Features
Stackable to cover -0.5deg to +2.5deg of tuning
Instant customisation without removing the Stabilizer
Tune for different disciplines and front wings
Cost-efficient foil system adjustment
MAX EFFICIENCY + PERFORMANCE
The newly developed Jet High Aspect foils have been engineered for maximum efficiency and performance. They feature an increased leading edge area allowing for narrower foil sections, resulting in improved glide and stability. The strategically designed wing tips offer exceptional speed, pumping efficiency, and turning ability. The combination of these elements results in a maneuverability that has never been seen before with HA foils. The slight rake angle reduces drag while providing more control and improved lift during turns. This new design also allows the foil to breach the surface without interrupting laminar flow. The new features on the Jet HA provide an optimized experience that allows riders to foil with ease, making it ideal for all types of riders regardless of skill level. The Jet HA offers an optimal balance between stabilization and performance that ensures smooth handling on any type of wave or swell.
Whether winging at speed, laying deep carves on a wave face or pumping and linking up swells on a downwinder – AXIS Power Carbon enters a new realm of control and connection between board and foil. It’s the next giant leap in foiling performance.
High aspect foils = higher loads on masts
During early ART foil testing, our research team quickly realized that higher aspect ratios and broader foil spans applied more bending and twisting forces to the mast. So while ART foils were a game-changer even on our existing masts, we knew there was still huge untapped potential to be realized.
And so began a whole new development project, and we couldn’t be more excited at the result. With a new power profile and carefully considered material selection and placement, AXIS Power Carbon delivers both superior stiffness with next-level strength.
Opting for a one-piece design, we avoided the flow/drag and jointing issues associated with multi-part mast constructions.
Additionally and more importantly, testing proves that maximum loading is concentrated close to the baseplate and this is why the mast tapers thicker at this point to handle the loads. Any joins or two-piece construction at this high load area would destroy the integrity of the mast.
A revised fuselage connection design maximizes the size of the attachment point to achieve a perfect fit to the fuselage reducing any chance of unwanted movement.
The result is a positive connected feel, direct drive, immediate feedback and ultimate control. High aspect foils perform as they should, feel and control enter an entirely new realm.
The new High Modulus Carbon fibre used in our mast layup is considerably stiffer and stronger than the regular carbon fibre used in conventional constructions. Innovative, considered and balanced placement of materials in our proprietary production process paired with rigorous testing has delivered a breathtaking performance leap.
Ride characteristics are so game-changing, that it’s been a struggle to get our team riders to return the prototypes after testing!
Feedback featured claims like ‘a way more positive and connected feel’, ‘immediate feedback’ and ‘ultimate control’.
Choose your Power level
Our new masts are available in two models, the Power Carbon and Power Carbon - High Modulus, the latter providing additional strength and 35% more bend resistance than our industry-leading 19mm aluminium mast. The High Modulus will be the mast of choice for the most discerning rider seeking ultimate performance, and heavier riders using our larger span foils.
With AXIS Power Carbon masts, riders will finally be at one with the foil.
AXIS Power Carbon Masts have a new and greatly improved base connection design. While fully compatible with all existing Red & Black fuselage, a new installation technique/method is required, this involves simply inserting the mast leading edge first into the fuselage opening, then rotating the trailing edge down. Removal is done in reverse, trailing edge rotates out first... super simple!
Remember use only 30mm M8 bolts to attach fuselage to Power Carbon masts
The foils of the PHANTOM line are designed to glide effortlessly when pumping or connecting waves and prove themselves very agile and precise when surfing and winging.
Aspect Ratio: 6.0
Speed and glide
Radical turns and agile carving
Efficient pumping and planing start
Incredible freestyle abilities
Available in 980 cm²/1080 cm² / 1280 cm² / 1480 cm² / 1780 cm²
Sets:
FW PHANTOM CARBON 980 + FUSELAGE CARBON XXS + STAB C250 FENCE + TOOL TORX T30
FW PHANTOM CARBON 1080 + FUSELAGE CARBON XXS + STAB C250 FENCE + TOOL TORX T30
FW PHANTOM CARBON 1280 + FUSELAGE CARBON X-SHORT + STAB C275 SURF + TOOL TORX T30
FW PHANTOM CARBON 1480 + FUSELAGE CARBON SHORT + STAB C275 SURF + TOOL TORX T30
FW PHANTOM CARBON 1780 + FUSELAGE CARBON SHORT + STAB C275 SURF + TOOL TORX T30
Connecting waves while wing foiling, surfing or even downwinding is easy and fun with the PHANTOM CARBON foil. Carving is also part of its DNA, as connecting waves isn’t much fun if you can’t turn properly. By working on the lift distribution, arch shape, and other details, we reached a performing foil that can carve smooth curves on the waves and swells.
The PHANTOM CARBON range is well-balanced and will satisfy a broad variety of riders thanks to its wide size range and huge potential. These foils have it all and do everything well: a satisfying glide, a great planing start, and amazing carving abilities.
The PHANTOM 980 is the newest size in this range. This is a high-performance foil that will allow you to take your skills to the next level in surf foil or wing foil, while maintaining good carving and pumping abilities.
The PHANTOM 1080 is the ideal front wing for surfing due to its speed-to-lift ratio that will allow you to keep up with the wave and surf it for as long as possible. It is surprisingly easy to use, but also provides incredible performances in speed, carving and pumping when needed.
The PHANTOM 1280 provides a similar program to the 1480 but is more versatile. It carves better, goes faster, and is a good combination of planing and performance for wing foil. It is also suitable for lighter riders (< 70 kg).
The PHANTOM 1480 combines efficiency and accessibility. Its lift allows you to glide endlessly while having fun thanks to its incredible maneuverability and stability. It is an ultra-versatile foil that will allow you to surf in waves < 1m50, venture downwind, wing foil, or even try dockstarts or wakefoil… It does everything well and will be there for you even in weak conditions.
The PHANTOM 1780 offers the highest lift of the range. The program is the same as the smaller sizes, but this foil is more adapted for heavier riders (> 85 kg). It is a large and stable wing that remains highly maneuverable, and that will bring extra power in light winds.
Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport.
The PHANTOM CARBON 980 and 1080 are recommended with the C250 SURF or C250 FENCE. This stab has been thought out to perfectly exploit the power and abilities of these PHANTOM. Sharp and precise, it will allow you to gain speed and maneuverability, and to easily connect waves.
The 1280, 1480, and 1780 are better suited for a C275 SURF stab. Progressive and versatile, this stab will bring stability, control, and confidence to your ride.
The AXIS Progressive Rear Wings are perfectly paired with our HPS, ART, BSC and PNG wings. Mostly flat but with a very subtle downturn, these wings combine excellent speed with sensational turning.
Who are the AXIS Progressive rear wings for?The AXIS Progressive rear wings are all round wings for intermediate and advanced riders paired with higher performance front wings such as HPS, ART, PNG and BSC front wings.
You notice the difference in your first carve or gybe.
Why did we design the AXIS Progressive rear wings?We got super hooked on the locked in, fast, stable feel of the AXIS Speed 380/60 and 420/60 rear wings, and still are for flat water blasting and racing for winging and big, fast waves for foil surfing. But we had a feeling we still had more to give our riders in the turning department. After several iterations and tweaks, the new Progressive rears have delivered it in spades.Medium aspect, with a thin foil section and subtle turned down tips, this new design rolls into the turn beautifully, feels fluid and loose, and also grips through the carve and transitions back out the other side with predictable control and positive acceleration. Even intermediate foilers will notice the difference straight away. It’s super well-behaved in rough winging conditions (just set and forget) and with the thin foil section, it’s still rewardingly quick. The Progressive rear wings will feel like a natural extension of your feet.Riders are finding the Progressive rears pair beautifully with our AXIS ART and AXIS HPS high aspect front wings, and they’ll work very well with any foil for riders looking to improve their turns and carves. As always, size your Progressive rear wing to your experience and front wing size. (larger sizes for less experienced riders and larger front wing pairings)
We obsess over rear wings, almost to the point that it’s a problem. We’ve tried to get professional help but the prototypes just keep getting churned out by our design team on a weekly basis, and we can’t help but test, analyze, pontificate, redesign – and on and on it goes.
You may be thinking – why do rear wings matter? Aren’t they just stabilizers to balance the front wing? Well that’s what many thought too – in the very early days. We know that your rear wing can change your life. Okay that’s not quite true, but it will significantly affect the ride characteristics of your whole foil set up.
Try the AXIS Progressive rear wings and you will immediately know what we are talking about.
The MA1200 Front Wing is your go-to wing for when the breeze is up or for bigger waves. Balanced feel and powered-up performance, with exceptional maneuverability. Suitable for Kite, Wing, Surf and Tow Foiling.
Features
Higher speed top end performance
Extremely fast and responsive turning radius
Incredibly efficient
Insane glide and pumpability
Materials
Carbon Pre-preg
WING / PRONE / KITE / PUMP / DOWNWIND / SUP / WIND
Aufbauend auf dem positiven Feedback, das wir für unsere 60cm Alu 3BS Fuselage erhalten haben, haben wir beschlossen, diese Verbesserungen auf unsere längeren Fuselages auszudehnen. Wir haben jetzt 66 cm und 74 cm AL 3BS Fuselages, die unsere früheren Carbon-Fuselages mit 68 und 78 cm ersetzen. Die Umstellung auf Aluminium ermöglicht es uns, den Querschnitt der Fuselage zu reduzieren und dadurch den durch die Fuselage erzeugten Widerstand zu verringern. Gleichzeitig erhöhen wir die Festigkeit und das Gewicht nur um 2,5%. Alle unsere AL 3BS-Fuselagens verfügen über eine kleine Vertiefung hinten, in die der Stabilisator eintaucht und die Hydrodynamik verbessert. Sie haben große Aussparungen, wo die Befestigung des Frontflügels ist, um das Gewicht auf ein Minimum zu reduzieren. Natürlich erfordern die neuen Aluminium-Fuselages etwas mehr Pflege und müssen nach jedem Gebrauch demontiert und mit Süßwasser gespült werden, aber wir glauben, dass der Gewinn an Leistung es wert ist!
The MA1350 Front Wing is a mid-aspect ratio wing ideal for all rider weights. Easily generates lift without pumping. This performance wing is fast turning, with early planing ability for lighter wind conditions or heavier riders. Suitable for Kite, Wing, Surf and Tow Foiling.
Features
Higher speed top end performance
Extremely fast and responsive turning radius
Incredibly efficient
Insane glide and pumpability
Materials
Carbon Pre-preg
729,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...