F-ONE SK8 HM Carbon (T2) 2026
1.239,00 €*
Sofort versandfertig, Lieferung in ca. 2-5 Werktagen
Produktinformationen "F-ONE SK8 HM Carbon (T2) 2026"
Carving is (still) not a crime
Overview
- Intuitive, responsive and fun foil
- Refined design and improved construction
- Surf-like feel
- More glide, control and carving freedom
- Aspect Ratio: 8.0
- New profile for balanced front-to-back foot pressure
- Refined outline and wingtips for improved roll and maneuverability
- Agile across the full speed range, even when overpowered
- Most versatile foil in the range
- TITAN 2 connection for improved structural efficiency, better glide and a more direct feel
- Dynamic Structural Design with optimized carbon layup for increased control and stability
Program
- Roll: 90%
- Carving: 100%
- Glide: 75%
- Speed: 75%
Presentation
- Third-generation SK8
- Refined profile and outline
- Designed for a surf-like feel
- Steady pressure at all times
- Narrower wingtips
- Perfected carbon layup
- Fast and playful feel
- Improved maneuverability, comfort and low-end efficiency
- Handles tip breaches with ease
- Tight turns and clean transitions
- Works across a wider range of conditions
- Maintains full maneuverability across the entire speed range
- For carving small waves, open-ocean bumps, foam hits and linking turns
- For winging with high-speed glide and natural upwind ability
Technology
-
TITAN 2 Connection
- Revised design for efficiency, rigidity and reliability
- Uses two M8 screws
- Reinforced structural connection
- Improved precision and responsiveness
- More direct feel underfoot
- Improved pumping
- Stronger connection to the foil
-
Dynamic Structural Design
- Carbon fiber layup tailored to the foil’s program and use
- Fine-tuned layup for maneuverability, comfort, stiffness and pumping efficiency
-
HM Carbon
- High Modulus Carbon fiber layup
- 1.5x stiffer than regular carbon fiber
- Adjusted high modulus fiber percentage for bending and torsion stiffness
- Keeps enough comfort for any kind of practice
-
Monobloc Front Wing
- Front wing molded together with the fuselage
- Stiff and solid assembly
- Removes unwanted movement between parts
- Provides control and direct foil response
-
Pre Preg Technology
- Stiffer and stronger foils
- Carbon fiber directly impregnated with epoxy resin
- High-quality process
- Light weight with strong mechanical properties
Size range
| Model | Area | Span | Aspect Ratio | Weight |
|---|---|---|---|---|
| SK8 HM Carbon 550 | 550 cm² | 67 cm | 8.2 | 0.93 kg |
| SK8 HM Carbon 650 | 650 cm² | 72.5 cm | 8.1 | 0.99 kg |
| SK8 HM Carbon 750 | 750 cm² | 77.5 cm | 8.0 | 1.09 kg |
| SK8 HM Carbon 850 | 850 cm² | 82.5 cm | 8.0 | 1.20 kg |
| SK8 HM Carbon 950 | 950 cm² | 87 cm | 8.0 | 1.26 kg |
| SK8 HM Carbon 1050 | 1050 cm² | 91.5 cm | 8.0 | 1.39 kg |
| SK8 HM Carbon 1150 | 1150 cm² | 96 cm | 8.0 | 1.50 kg |
Sold with
- FW SK8 HM Carbon
- EVA Soft cover
-
Packaging kit:
- 2x M8-25mm tapered head screws
- Torx key T30 – T40
- User Guide
Available sizes
- 550 cm²
- 650 cm²
- 750 cm²
- 850 cm²
- 950 cm²
- 1050 cm²
- 1150 cm²
Kunden kauften auch
Ultra-thin high-performance carbon mast for maximum glide, speed and direct control The F-ONE UHM Carbon Mast 12 is crafted for riders who demand the very best in glide and performance. Developed with an ultra-thin profile and a highly refined construction, this mast is built to maximize speed, efficiency and direct control across demanding foil disciplines. Ultra-thin profile for exceptional glide and top-end speed With a profile measuring just 12 mm at its thinnest point, this mast is designed to minimize drag and maximize glide. Its tapered chord and thickness make it slightly wider and thicker at the top before narrowing toward the fuselage, creating a shape that helps generate more speed and efficiency on the water. This ultra-thin design makes it especially effective for downwind runs, high-speed wing foiling and kite foiling, while also helping riders gain more pop and height during tricks. UHM Carbon layup for increased rigidity and precision The custom Ultra High Modulus (UHM) Carbon layup makes this mast 25% stiffer in bending than the HM Carbon 14 mast. This provides exceptional rigidity and more precise control in both bending and torsion, resulting in a very direct feel underfoot and excellent maneuverability. The UHM Carbon fiber layup is also 1.2x stiffer than High Modulus Carbon and 1.8x stiffer than regular carbon fiber, giving this mast the structural performance needed for such a thin profile. Advanced one-piece construction with optimized internal structure Molded and cured in a single shot from carbon pre-preg, the one-piece construction integrates F-ONE’s optimized SPINE internal structure. This enhances rigidity, efficiency and control, especially through turns, while delivering a higher level of stiffness, precision and overall performance. The use of pre-preg technology ensures an optimized epoxy-to-carbon ratio, resulting in a lighter, stiffer and stronger construction with excellent durability. New TITAN 2 connection and updated top plate The mast features the new top plate and updated TITAN 2 mast foot at the bottom. The redesigned top plate is compatible with lockable T-nuts and includes the keyhole-shaped Quick-Attach System for faster assembly. The TITAN 2 connection improves structural efficiency, rigidity and reliability at the mast-to-foil connection. Built around a reinforced structure using only two M8 screws, it delivers a more direct feel, improved pumping and a stronger foil connection while maintaining excellent hydrodynamic performance. This mast is compatible with virtually all boards on the market featuring the Twin-Tracks system and with all front wings using the TITAN 2 connection. Key features Ultra-thin 12 mm profile Maximum glide and speed Increased rigidity for a direct feel and total control Custom Ultra High Modulus Carbon layup 25% stiffer in bending than the HM Carbon 14 mast Optimized SPINE technology for rigidity, efficiency and control One-piece carbon pre-preg construction New top plate with Quick-Attach System TITAN 2 connection for better structural efficiency and a more direct feel Compatible with Twin-Tracks boards and TITAN 2 front wings Program Efficiency / Glide: 100% Bending Stiffness: 95% Torsion Stiffness: 65% Sizes 75 cm 80 cm 85 cm 95 cm Sold with Three-piece soft cover 4x M6-25 mm tapered head screws 4x T-Nuts M6 User Guide
TITAN Mast Foot V2 The TITAN Mast Foot V2 is the connecting part that makes F-ONE aluminum masts compatible with all TITAN V2 fuselages and wings. It is made of superior-grade aluminum 6061, CNC machined with high precision and fully anodized. To install the TITAN Mast Foot V2, it should be inserted into the bottom end of the aluminum mast and fastened with two M6x25mm tapered head screws. Technology Aluminium 6063 & 6061 This aluminum alloy boasts very good mechanical properties and can be processed in many ways while also offering a natural resistance to corrosion. Produced from an extrusion process, F-ONE aluminum profiles make the most of this homogeneous material to provide perfect stiffness both in torsion and bending. All areas in contact with other metals or carbon parts are duly isolated against galvanic reactions. Machining blocks of aluminum 6061 guarantees maximum accuracy and preserves the mechanical properties of this higher grade of aluminum. All parts are fully anodized and stainless-steel inserts are fitted with insulating gel when fastening is required. TITAN 2 Connection The TITAN 2 connection introduces a revised design to deliver even greater efficiency, rigidity and reliability at the critical junction between the mast and foil. Building on the compact, stiff and easy-to-assemble format that made the original TITAN so effective, the TITAN 2 uses only two M8 screws and benefits from a reinforced structural connection. The result is improved precision and responsiveness while maintaining excellent hydrodynamic performance. Riders benefit from a more direct feel underfoot, improved pumping and a stronger connection to the foil in all conditions. This added stiffness also allows riders to stand higher on the mast, helping reduce drag and optimize glide. Technical Details Product Material Compatibility Installation Reference TITAN Mast Foot V2 Aluminum 6061, CNC machined and fully anodized F-ONE aluminum masts with TITAN V2 fuselages and wings Inserted into the bottom end of the aluminum mast and fastened with two M6x25mm tapered head screws 77267-0200