RIDE ENGINE UNIVERSE HELMET

No tape. No stress. Just ride. WOO Big Air Handle. Concealed WOO sensor housing — keeping your sensor protected while enabling effortless session recording via an external button.  Built for riders who are pushing their big air to the next level by tracking progression with every session. WOO Big Air Handle, is our first handle developed for mount-less session tracking on almost any board you choose. Ergonomic grip profile, lightweight, impact-resistant composite construction - which provides outstanding strength without adding unwanted weight.  No sticky pads, no compromises easily swap your WOO between boards by swapping the handle. During the session you can trust the WOO to keep recording everything while in the handle thanks to the recessed button design. preventing accidental session stops during grabs. So your data is always ensured at the end of every session. With a universal mounting range of 170mm–200mm and a plug-and-play setup using standard M6 screws, the handle installs in under a minute and fits most boards on the market. Forget hunting for double-sided tape or waiting 24 hours for a mount to cure on a rental board. The WOO Big Air Handle installs and moves between boards in seconds — making it the ideal solution for demos, schools, and WOO competitions where a shared sensor setup is a must. Whether you're dialing in your first board-off or sending it at competition level like Andrea Principi, this is the reliable, clean mounting solution your sessions deserve.  Set Includes: 1x Handle; 2x 11.2mm flat head screws.

APEX BINDINGS   Designed for superior comfort, the Apex is the market’s leading ergonomic binding for all styles of twin tip riding. It features a full array of adjustment settings to easily adapt to feet of any size and shape. The Apex offers precise positioning, fit and remarkable comfort while maintaining outstanding board feel. The four-way adjustable footstrap can also be conformed to both large and small feet, keeping kiters locked-in and confident when riding.   

STAR - IMPACT VEST Features CE approved YKK Side-zip Clash foam Non-padded harness waist part Zipper lock Please note: This is not a floatation device / buoyancy aid    

Maximum protection, zero distractions. The zipless, near-seamless Impact Under Vest is built for surfers who want serious protection without sacrificing comfort. Packed with 20mm wipeout-proof foam blocks, it absorbs impact and breaks the water’s surface tension on high-speed falls. Despite its high level of protection, it stays flexible and comfortable, giving you full freedom to move. Wear it on its own or under a wetsuit.Features20mm impact foam blocksRemovable chest foam blocksPlease note: This is not a floatation device / buoyancy aidWearable under a wetsuitMaterialienMX2 Neoprene

HIGHLIGHTS Switch effortlessly between disciplines - no tools required. Intuitive single-action reload Uncompromised direct performance Think Less, Feel More Switch effortlessly between disciplines with the Toolless Interloop, our no-tools required modular harness loop replacement system. The Navigator Control System connects you intuitively to your kite, using industry-leading SK99 Dyneema lines from Liros for precise performance. The 2022 Connect Quick Release and leash now complies with ISO Standard 21853:2020. Faster, safer release and intuitive single-action reload in all conditions. Available in three sizes, the refined ergonomic design offers durability, comfort and tactile control. Knowing your kite's position just became second nature. Switch effortlessly between disciplines - no tools required. Simply push, twist, pull, lock and go. The Toolless InterLoops are made from optimised TPU material for flex and durability, with a more rigid freeride security finger to prevent unexpected unhooking. Intuitive single-action reload Security and performance in all conditions. Our patented and ISO-approved Connect Quick Release (QR) raises the bar in kite control system safety. Uncompromised direct performance Our industry-leading 100% Dyneema SK99 flying lines are strong, thinner profile and pre-stretched for less parasitic drag and uncompromised direct performance. With 88m of flying lines in the air, you can really feel the difference thinner line creates. Fine-tune the turning speed of your kite The Navigator is available in three adjustable bar length sizes: 38-43cm, 40-45cm and 45-50cm.  DETAILS TOOLLESS INTERLOOP SYSTEM WITH LOCKGUARD Switch effortlessly between disciplines - no tools required. Simply push, twist, pull, lock and go. Loops are made from optimised TPU material for flex and durability, with a more rigid freeride security finger to prevent unexpected unhooking. Flexible LockGuard safety ring prevents accidental release of your interloop. SOFT EVA BAR ENDS WITH RETRACTABLE LINE WINDERS The positive buoyancy bar ends with integrated line winder bungees are injection moulded in one piece with no-glue seams for long-lasting quality. The bar ends ensure nothing hard comes in touch with you or your board, float the entire bar, and also contain the concealed rear line adjustment. Even the best quality lines shrink over time, so after a month, we recommend you check your lines are all even and drop them to the bottom knot. It’s easy and takes only a minute to make the change. PROTECTIVE PU-COVERED LEADER LINES To help prevent line abrasion from uncovered lines against your skin, we've used colour-coded PU tubing covers. The covers also help them remain rigid and out of the way when the flying lines aren't under tension. ADJUSTABLE CLEATED TRIM SYSTEM Provides industry-proven line-adjustment when needed. The cleat base has been designed with circular geometry for consistent bar spin. In overpowered conditions the cleat allows you to shorten your front lines and remain in a comfortable body position. LIGHTWEIGHT OVER-MOLDED TRIM HANDLE WITH DYNEEMA LINES Easy to reach moulded trim handle doesn't hurt when it hits you. Made from Nylon/EVA for strength with a textured soft-touch grip. Top-quality German-made extremely high wear Dyneema depower and trim line with a special impregnation coating for resistance to abrasion. DURABLE COVERED MAINLINE, WITH CUSTOMISED TPU TUBING Symmetric multibore landing line channel allows the landing line/flying line to pass through without snagging, regardless of the orientation when deploying or reloading. Crafted from a patented material specifically formulated for high abrasion flexible applications. CUSTOM LOW-FRICTION SPINNING HANDLE Unspin your front lines easily. ADJUSTABLE LENGTH FLYING LINES 22M (12M + 10M) 22m lines have a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of flying line and 12m lines are ideal for schools to teach with and for foil racing. 8m and 6m line extensions are available as an accessory for wave riding or tighter kiteloops. KOOK-PROOF FLYING LINE CONNECTORS Ensure you always set up your flying lines correctly. Designed to be exactly the same length so you can easily change the front (knotted end) and rear (lark's head loop) connectors to match most other manufacturers' kite configurations. Please familiarise yourself with the safety procedures and trimming instructions outlined in your kite’s user manual. PREMIUM QUICK RELEASE LEASH The Navigator Control System is supplied with a premium quality freeride Leash with a high load carabiner, soft neoprene cover and non-abrasive elasticised webbing. The leash QR mechanism has been modified to ensure correct orientation is maintained when released for consistent, safe release and reload. INTUITIVE SINGLE-ACTION RELOAD Security and performance in all conditions. Our patented and ISO-approved Connect Quick Release (QR) raises the bar in kite control system safety. The red QR handle has been ergonomically designed to fit in your hand comfortably for an industry-standard push away release. All loaded or running surfaces feature highly polished 316 stainless steel and low-friction components. The larger diameter bungee inside the QR helps reduce accidental release. INDUSTRY-LEADING 100% DYNEEMA SK99 FLYING LINES Strong, thinner profile, pre-stretched flying lines mean less parasitic drag and uncompromised direct performance. With 88m of flying lines in the air, you can really feel the difference thinner line creates. Our latest technology high-load LIROS DC-401 Pro flying lines have extreme stretch resistance and minimal diameter (1.6mm). THREE ADJUSTABLE BAR LENGTH OPTIONS Fine tune the turning speed of your kite. The Navigator is available in three sizes 50-55cm (L), 45-50cm (M) and 38-43cm (S). To extend/retract bar length simply pull out cassettes on the bar-ends, rotate 180 degrees and snap back into place. OMNIDIRECTIONAL GRIP WITH OFFSET FINGER BAR AND COLOUR-CODED COMPONENTS Feel more connected. The Navigator is designed with a comfortable ergonomic grip for a natural grasp and the tactile offset finger bar is slightly oval, so you can feel when the control bar is orientated correctly. The colour-coded bar ends, leader tubing and line retainer pull tabs give a nod to our sailing heritage, port (red) and starboard (green). SPINNING LEASH ATTACHMENT RING Our oval-shaped leash pin ring is elongated for easier fastening of the leash carabiner, and spins to help prevent your landing line from twisting. DYNEEMA TRIM LINE Top-quality German-made extremely high wear Dyneema depower and trim lines, with special impregnation coating for resistance to abrasion.    

Keep a roll of this self-adhesive tape in your gear bag as a quick emergency fix for wing and kite canopy tears. Developed in collaboration with North Sails Advanced Textiles, the tape is a semi-transparent (off-white colour) to match all canopy colourways. Extra strong self-adhesive bond. Important: Install above 10℃. Any temporary canopy repair will need professional repair to prevent further damage to your kite or wing. Do not use on uneven, wrinkled or textured surfaces.FeaturesEmergency quick-fix for wing or kite canopy tearsSemi-transparent to match any canopy colourExtra-strong waterproof self–adhesive bondINCLUDED: 1x Roll of tape (3m x 40mm)

Vapor, pure tm pre-shaped moulded hardshell kiteboarding harness. The most extreme, full support harness ever. Full neoprene inside and build on our proven shell construction combining a shaped back support directly to our bar for perfect load distribution and the ideal fit. Made out of a pure tm composite with flex-gen memory foam. Delivered with our unique titanium electroplated Alpha bar combined with the original molded slide in Barpad System prevents the bar to ride up.Innerplate: Mark VI external loadplateSpreaderbar: Alpha bar with electro plated finishClosure: EZ Belt ConstructionMaterial: PURE patented material, lighter than water, stronger than steel, elasticity enhanced and a different dimension in Pure technologySport: Kitesurfing