Der Cabrinha Foil Mast ist voll kompatibel mit allen Cabrinha Foils von 2016 bis 2020 (ausser dem AV8)
The CabrinhaFoil Mast is fully compatible with all Cabrinha Foils Years 2016,2017,2018,2019 and 2020 (only not the AV8 foil)
Größen SIZES40 cm | 60 cm | 85 cm
SIZES: 40 | 50 | 60 | 75 | 85 | 95 | 110 | 125 | 140WING-SURFING/FOIL SURF
3K CARBON/WOOD CNC EPS CORE CONSTRUCTION• Lightweight CNC cut EPS core• High density deck-to-bottom foil track system with carbon reinforcement• Full 3K carbon deck with wood sandwich and double wood in the stance area• 3K carbon reinforced wood sandwich bottom• Kevlar reinforced rails• Carbon strip bottom stringerEVA DECK• Diamond diecut EVA pad with micro dot embossing• Back foot arch support• Beveled tail kick areaFOOTSTRAP INSERT LAYOUT• Minimum stance width widened by 5 cm• 6 hole inserts for front strap positions• Layout allows for dual strap setup (back strap straight - front strap angled forgoofy or regular stance)• Windsurf style 3 strap setup• Front: parallel double strap setup
FEATURES FOR S26• Due to their higher volume-to-length ratio and the option to ride withstraps, the 40, 50 and 60 liter boards have gained in popularity. Those sizeshave been fine-tuned to be used for both Wing-Surfing and surf foiling.The foil track boxes and the tail kick were moved 1.5 inches towards the tailto increase options for lighter riders mounting their foils for surf foiling.• All models have a decreased nose and tail width. This is more apparent onthe smaller sizes up to the 95 and only sightly visible for sizes above 95.The result is reduced swing weight, benefiting its use with the Wing-surfer,especially in windier conditions.• The foil track positioning has been moved closer to the tail on all sizes.This adjustment is more significant on the smaller sizes than on the biggersizes.• The tail kick was moved further back to align with the foil track boxes,lengthening the water line which results in earlier lift off.• The double concave nose shape was accentuated, softening re-entry whencoming off the foil.
1750
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible!
Recommended for novice riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil.
Recommended for novice heavy weight riders, the ideal hydrofoil for schools.
UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH:
UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH:
UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26
UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26
FUSELAGE 76 with EVA COVER Y26
M8 TORX SCREWS & KEY SET
M6 TELESCOPE SCREWS & KEY SET
2022/23 Naish Jet Foil Series for maximum performance
There are three versions:
Jet Foil HA (High Aspect) Semi Complete
Jet Foil MA (Medium Aspect) Semi complete
Jet Foil Standard (Low Aspect) Semi Complete
Here are the main differences between these models.
High Aspect (HA) Foil:
High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio).
These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance.
High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio.
Medium Aspect (MA) Foil:
Medium aspect foils strike a balance between the characteristics of high and low aspect foils.
They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability.
Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control.
Low Aspect (LA) Foil:
Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio.
These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed.
Low aspect foils are often chosen for learning to foil and for cruising at lower speeds.
When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use.
The high number (for example 1600) gives you the surface of the front wing in cm2.
Scope of delivery:Jet front wing + EVA coverStabilizer Jet HA + EVA coverFuselageCarrying caseTorx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
FUSION H TAIL STABILISER
HIGH ASPECT FOIL
HS180
DESIGN PROFILE
Swept outline, Ultra lean efficient profile, moderate anhedral
RIDER PROFIL
Versatile efficient and fast wing set for high performance
WING FEATURES
Optimal efficiency & maneuverability
Flat center, to downward tips, for pefect balance between locked-in feel and agility
Single molded components for minimal drag
Full prepreg carbon construction
PMI core for supperior strength to weight ratio
Includes: Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws
The HS180 High aspect stabiliser has been seamlessly molded as one single component into the fuselage to give exceptional efficiency and stiffness. it allows the rider complete control through varying degrees of the turn and has been precisely tuned for use with all H-series and X-series wings.
Created in collaboration with Cloud IX surf foils the Impulse wing set confidently crosses kite, surf and wake hydrofoiling. Designed to provide rapid lift and long glide, along with a wide speed and wind range. The Impulse will take your freeride kite hydrofoiling to the next level.
Allowing more time for tack and gybe transitions, constant wing engagement on jump landings, and the ability to drop a size kite or get out in even lighter wind conditions than ever imagined. These same design attributes make the Impulse ideal for mounting on a hydrofoil compatible SUP or prone surfboard. Efficient and smooth controlled lift, along with the ability to generate glide by pumping the wing, keeps swell energy connectivity easy and manageable. This magic can be translated behind the boat where the Impulse excels at sustained hydrofoiling on both the primary and secondary wakes with or without the rope!
Standard Impulse set sizeMast Length: 94.8cm alloy 2480gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 4420 (with variance)
Short mast Impulse set sizeMast Length: 60cm alloy 1770gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 3750g (with variance)
Technical DataRider level Intermediate – AdvancedConfort zone speed 12-18 miles/hLow end lift speed 5 miles/hTop end speed 24 miles/h
Kite & Surf
Crossover use for kite, surfing, SUP and wake
Carbon Wings
Carbon construction low aspect wing
Alloy Mast
Efficient profile extruded alloy mast (available in 2 lengths)
Carbon Fuselage
Carbon fuselage with dual position rear wing mounting
Lightweight
Lightest crossover hydrofoil kit available
AV8 FOIL & BOARD Set
- High performance super light carbon foil and board
- original list price was 3548 euro
Set containing of:
AV8 FOIL BOARD
HIGH PERFORMANCE KITE RACE
Sizes: 148.8cm x 45.2cm x 7.7cm
The AV8 foil board is specially designed for riders looking for performance and efficiency with high end materials. The AV8 is made from 100% prepreg carbon with EPS foam core. With it's race oriented design, beveled rails for max lean angle and it's extended planing surface, the AV8 will keep you ahead of the pack. A warrior on the race course and an explorer on the open water.
DESIGN PROFILELow weight, max lean angle, early take-off.
FEATURES
EPS Core, light weight, buoyant
100% carbon sandwich
Beveled Rails provide you with maximum lean angle
Pro box foil connection
Full EVA pad
3 Strap insert configuration
AV8 FOIL KIT
HIGH PERFORMANCE RACE
Sizes: 105 CM MAST
The AV8 hydrofoil is a stunning work of art designed for riders looking for ultimate performance and efficiency. Made from 100% pre-preg carbon, the AV8 foil assembly is as beautiful as it is technical. It’s wing is incredibly fast yet infinitely adaptable to wind and water conditions. For a wing with no apparent limit to it’s top end speed, it’s incredibly stable and forgiving at low speeds. A warrior on the race course and an explorer on the open water. Board match: AV8 board, (Autopilot, X-Breed Foil and DA, with adaptor).
DESIGN PROFILEHigh aspect ratio, lean profile, continuous curve anhedral.
COMPONENT FEATURES
100% pre-preg carbon construction
Pro box mounting
Short fuselage configuration for superior maneuverability
Integrated wing and fuselage for maximum stiffness
WING FEATURES
Lean profile for low drag and on demand acceleration
100% Pre-preg carbon construction
High Aspect Ratio layout for ultimate performance and speed
TECH SPECS
Chord: 117mm
Projected area: 56,916 mm²
Wingspan: 605mm
AR: 6.4
Volume: 443,700 mm³
Set includes:Titanium hardware - m6x40mm(4pcs), 4mm allen key (1 pcs).
SET DOES NOT INCLUDE STRAPS
HIGHLIGHTS
Lightwind Wing Foiling
Reflexed technology for stability and speed
Self-trimming
WHAT RIDERS SAY
"This is the easiest to ride hydrofoil I’ve ever been on in my life." - George Hradil
Wing / SUP / Surf
The new 2200R reflexed wing is brilliant for lightwind wing-foiling. Unbelievable stability and slow stall speed through the turn makes learning gybes and tacks easier, giving newer riders confidence to try more manoeuvres and progress quickly. Smooth carvy turns in prone for heavier riders and in SUP foiling. Touchdowns are a breeze. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 2200R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 2200R feels smaller than it is in terms of speed range and responsiveness.
Lightwind Wing Foiling
A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling
Reflexed technology for stability and speed
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing.
Self-trimming
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
DETAILS
INCREDIBLY STABLE
Gives newer riders confidence to try more manoeuvres and progress quickly
PRE-PREG CARBON TECHNOLOGY
Ultimate high-performance composite material
LIGHTWIND WING FOILING
A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling
REFLEXED TECHNOLOGY FOR STABILITY AND SPEED
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size.
SELF-TRIMMING
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL
The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.
The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.
Unmatched comfort, speed, light wind abilities, and; a twintip feeling! No need to change positions, no need to move your feet, going both ways was never so easy on a foil. Our full carbon Twin Fin Foil gives you all the performance you need, and all the lift you want. Creating an ultimate platform for any board; twintip, softtop or even an inflatable!
HI:RISE CARVE
ALL-AROUND FREERIDE KITESURF
The foil has a frontwing size of 1160 cm2
Sizes: 65, 85 CM MAST
The HI:RISE CARVE is specifically designed for any rider looking for a diverse wing set, which will take you from your first steps, to next level freeride and waves.
The Carve wing is a modern high lifting wing set that is highly manoeuverable bringing you an entirely new level of performance and fun. With its signature winglets, the HI:RISE CARVE is a stable and easy foil to fly. The lower aspect ratio outline combined with the foil cross section requires very little input from your kite to get flying. Once up, the sky is the limit. The added lift comes into play whether you are carving turns in the pocket or pumping through lulls.
The winglets provide an added level of stability to the wing and reduces induced drag, increasing aerodynamic efficiency, especially when riding through turbulent waters. The rear wing can be adjusted forward or aft to increase the ability to "carve" or facilitate a more 'locked-in' ride. These light weight wings are constructed with a Pauwlonia wood core and durable Basalt fibers. The wingset mounts to our all new 75cm (29.5 inch) wide nosed fuselage. The wider nose of the fuselage facilitates a significantly more stable connection to the wing.
The wing set and fuselage are compatible with the Cabrinha foil eco system. Choose the mast length that suits your style and performance needs. Board match: AutoPilot, X-Breed Foil, Double Agent.
Please note the updated screw sizings for the Carve front wing:
Front hole: 38mm / Middle hole: 38mm / Rear hole: 27mmNot sure? Check out the Foil Screw Guide
DESIGN PROFILELow aspect ratio, low planing profile section, moderately swept outline, compound anhedral.
COMPONENT FEATURES
NEW 750mm extended Widenose Fuselage with improved stability and hydrodynamics
NEW adjustable rear wing positioning for increased ability to "carve" or facilitate a more 'locked-in' ride
Aircraft-grade extruded, anodized 6061-T6 aluminium components
Hollow core Mast extrusion for improved floatation and minimal weight
Lightweight top socket with indicator for use on industry standard track mounting system or 4 point connection
Our new highest quality pre-preg carbon mast delivers a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction, the refined one-piece design presents a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions. Features GeoLock.
FUSION CARBON MAST
FOIL / LIGHTWEIGHT
70cm 80cm
DESIGN PROFILE
Ultimate stiffness to weight ratio and minimum drag
RIDER PROFIL
Riders looking for a premium 100% carbon, ultra-stiff & lightweight foil mast
MAST FEATURES
Integrated baseplate for superior stiffness and reduced weight
I-beam full carbon pre-preg construction
PMI core for superior strength to weight ratio
Precision tapered fuse-to-mast connection for optimal rigidity
Tapered chord for reduced drag
The Fusion Carbon mast puts performance above all else. The Prepreg Carbon construction gives insane stiffness in a lightweight package. It seamlessly integrates into all 9cm industry standard foil boxes.
HIGHLIGHTS
Sonar CF72 or CF85 Mast
Easy recovery from surface breaching
Carbon Fuselage 600mm
WHERE IT THRIVES
Wing, SUP or Surf foiling
WHAT RIDERS SAY
"Nothing beats the feel of carbon." - UIi Sommerlatt
Beyond Limits
Insane response. Incredible performance. Our new highest quality pre-preg carbon modular foil edition provides a stiffer, more direct feel and more immediate feedback. Engineered with increased strength for higher loads, the Carbon Edition excels across all foiling disciplines. The refined one-piece mast design is tapered for optimal load transfer and lower surface friction, and features our unique GeoLock system. Comes complete with our new high-strength 600m pre-preg carbon fuselage and S01 Stabilizer for a durable, corrosion-free foil with great pumpability and a sporty feel with earlier take-offs. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions.
Sonar CF72 or CF85 Mast
New highest quality pre-preg carbon mast for a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction. Refined one-piece design - strong, durable and corrosion-free.
Easy recovery from surface breaching
In perfect harmony with any Front Wing, our dihedral-shaped carbon pre-preg rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy surface breach-recovery.
Carbon Fuselage 600mm
New high-strength 600m pre-preg carbon fuselage weighs ~50% less than the A600, with equal strength and stiffness. Strong, durable and corrosion resistant. Improves pumpability. Earlier take-offs.
DETAILS
SONAR CF72 OR CF85 MAST
New highest quality pre-preg carbon mast for a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction. Refined one-piece design for a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. choice across all disciplines. The longer CF85 mast increases overall ride performance in choppy conditions.
GEOLOCK LOAD BEARING CONNECTION
Engineered to last, our unique GeoLock tapered geometry locking system provides a more effective load-bearing connection between the Mast and Fuselage, locking them together, so they feel like one piece. Screws engage the GeoLock while the load transfer now takes place over the full cross-section of the mast profile, allowing for a more efficient load distribution and longer-lasting connection. Patent-pending.
EASY RECOVERY FROM SURFACE BREACHING
In perfect harmony with any Front Wing, our dihedral-shaped carbon pre-preg rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy surface breach-recovery. The Stabilizer's positioning on top of the Fuselage allows for a clean, undisturbed approaching flow. Surface piercing of the Stabilizer is not a problem, as the Front Wing sits deeper in the water and is still fully submerged, giving you that extra time to react and adjust your ride height.
INDUSTRY-STANDARD 165X90MM BOLT PATTERN
The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern. Foil Board and foil to board attachment screws sold separately
CARBON FUSELAGE 600MM
New high-strength 600m pre-preg carbon fuselage weighs ~50% less than the A600, with equal strength and stiffness. Strong, durable and corrosion resistant. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. Features GeoLock. Fits all Carbon and Aluminium Sonar Masts.
MODULAR FOIL SYSTEM
Customise your ride with our fully interchangeable foil parts to explore multiple disciplines and riding styles all with one setup.
SUPPLIED WITH SONAR TRAVEL BAG
Stow your Sonar Quiver safely in between sessions with our Heavy Duty 600D Padded Travel Bag. Roomy enough inside to fit the complete Sonar Foil set, including all three wings and three masts inside their individual covers. The bag also has enough depth to leave the Board Adaptor connected to the mast, making your foil packdown faster. Designed with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete Foil Edition.
FOIL TO BOARD MOUNTING HARDWARE SUPPLIED WITH NORTH FOIL BOARDS
FRONT WINGS SOLD SEPARATELY
INDUSTRY-STANDARD 165X90MM BOLT PATTERN
The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern. Foil Board and foil to board attachment screws sold separately
ALU MAST
45 > 95 CM
The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.
The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.
The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).
A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
FUSION ALLOY MAST
FOIL
40cm 70cm 90cm
DESIGN PROFILE
Durability, longevity, and unmatched stiffness in an alloy setup
RIDER PROFIL
Riders looking for a versatile, ultra-stiff foil system
MAST FEATURES
Choice of fixed top plate or FQR (Foil Quick Release)
3-screw connection for superior rigidity
aircraft grade extruded, anodized 6061-T6 aluminium
Precision tapered fuse-to-mast connection for optimal rigidity
Helicoil inserts mimizes corrosion and provides long lasting durabilityThe Fusion Alloy mast is constructed from extruded aircraft grade aluminium that result in an incredibly rigid & hydrodynamic structure. Helicoil inserts eliminate saltwater corrosion around the screw connection points. It seamlessly integrates into all 9cm industry standard foil boxes.
98,00 €*
Ce site Web utilise des cookies pour garantir la meilleure expérience possible. Plus d'informations...