Naish 2022 Foil Mast Aluminium 55 cm Naish 2022 Foil Mast Aluminium 65 cm Naish 2022 Foil Mast Aluminium 75 cm Naish 2022 Foil Mast Aluminium 85 cm Naish 2022 Foil Mast Aluminium 95 cm

FUSION H TAIL STABILISER HIGH ASPECT FOIL HS180 DESIGN PROFILE Swept outline, Ultra lean efficient profile, moderate anhedral RIDER PROFIL Versatile efficient and fast wing set for high performance WING FEATURES Optimal efficiency & maneuverability Flat center, to downward tips, for pefect balance between locked-in feel and agility Single molded components for minimal drag Full prepreg carbon construction PMI core for supperior strength to weight ratio Includes: Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws The HS180 High aspect stabiliser has been seamlessly molded as one single component into the fuselage to give exceptional efficiency and stiffness.  it allows the rider complete control through varying degrees of the turn and has been precisely tuned for use with all H-series and X-series wings.

HIGHLIGHTS Lightwind Wing Foiling Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "This is the easiest to ride hydrofoil I’ve ever been on in my life." - George Hradil Wing / SUP / Surf The new 2200R reflexed wing is brilliant for lightwind wing-foiling. Unbelievable stability and slow stall speed through the turn makes learning gybes and tacks easier, giving newer riders confidence to try more manoeuvres and progress quickly. Smooth carvy turns in prone for heavier riders and in SUP foiling. Touchdowns are a breeze. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 2200R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 2200R feels smaller than it is in terms of speed range and responsiveness. Lightwind Wing Foiling A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. DETAILS INCREDIBLY STABLE Gives newer riders confidence to try more manoeuvres and progress quickly PRE-PREG CARBON TECHNOLOGY Ultimate high-performance composite material LIGHTWIND WING FOILING A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.

Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"  

The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.

Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 5´0". Für Boardgröße von ca. 155cm x 68cm Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern. Größe 5´4". Für Boardgröße von ca. 165cm x 70cm   Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 5´8". Für Boardgröße von ca. 175cm x 76cm Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 6´3". Für Boardgröße von ca. 193cm x 76cm Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern. Größe 6´8". Für Boardgröße von ca. 205cm x 78cm

The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws

FUSION ALLOY MAST FOIL 40cm 70cm 90cm DESIGN PROFILE Durability, longevity, and unmatched stiffness in an alloy setup RIDER PROFIL Riders looking for a versatile, ultra-stiff foil system MAST FEATURES Choice of fixed top plate or FQR (Foil Quick Release) 3-screw connection for superior rigidity aircraft grade extruded, anodized 6061-T6 aluminium Precision tapered fuse-to-mast connection for optimal rigidity Helicoil inserts mimizes corrosion and provides long lasting durabilityThe Fusion Alloy mast is constructed from extruded aircraft grade aluminium that result in an incredibly rigid & hydrodynamic structure. Helicoil inserts eliminate saltwater corrosion around the screw connection points. It seamlessly integrates into all 9cm industry standard foil boxes.

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 900mm mast is the choice of big wave enthusiasts and tow-ins, when combined with the 680mm front wing. It's also the choice of downwinder pros when competing in open ocean swell. The AXIS 900mm mast is the main size mast for wind foilers and kite foilers, when they reach they are are not beginners any longer. Other mast sizes available: 450mm (15.6 inches) 600mm (23.6 inches) 680mm (26.6 inches) 750mm (29.5 inches) 820mm (32.2 inches) 900mm (35.4 inches) 1050mm (41.3 inches)

HIGHLIGHTS Performance crossover kite/surf/wing foil Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "That feel... relax, glide. It’s a new day so enjoy it." - Daniel Kereopa Kite / Surf / Wing / SUP / Wake The Sonar 1500R is a true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R is great for prone foil surfing in medium to large waves, has a smooth carvy feel and fits nicely in the pocket. Its predictable lift gives you time to find a comfortable stance without fighting to keep the nose down as the foil accelerates. So you’re able to remain in the same position over the entire speed range. The balance of the foil system means you can place your back foot further behind the mast, letting you ride the board more like a shortboard. Our new, specialised reflexed-camber foil section design gives the wing pitch stability and prevents your board’s tendency to nose up strongly when you first get going. Thus, it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness. A reflexed wing gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. Performance crossover kite/surf/wing foil A true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R has a smooth carvy feel and fits nicely in the pocket. Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. TIGHT CARVING AND SNAPPY TURNS Low to medium aspect ratio swept wing for maximum fun on and off the waves, with a low stall speed. PRE-PREG CARBON TECHNOLOGY​ Ultimate high-performance composite material PERFORMANCE CROSSOVER KITE/SURF/WING FOIL A true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R has a smooth carvy feel and fits nicely in the pocket. REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL SPEED AND INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.    

FUSION CARBON MAST FOIL / LIGHTWEIGHT 70cm 80cm DESIGN PROFILE Ultimate stiffness to weight ratio and minimum drag RIDER PROFIL Riders looking for a premium 100% carbon, ultra-stiff & lightweight foil mast MAST FEATURES Integrated baseplate for superior stiffness and reduced weight I-beam full carbon pre-preg construction PMI core for superior strength to weight ratio Precision tapered fuse-to-mast connection for optimal rigidity Tapered chord for reduced drag The Fusion Carbon mast puts performance above all else.  The Prepreg Carbon construction gives insane stiffness in a lightweight package.  It seamlessly integrates into all 9cm industry standard foil boxes.

HIGHLIGHTS High lift, low drag and fast upwind High performance glide Prepreg carbon technology WHAT RIDERS SAY "The big function of the High Aspect wing is upwind performance - it’s perfect for wingfoiling in flat or choppy water." - George Hradil Wing / SUP The new HA1450 is the bigger brother of the HA1250, designed for a heavier rider or lighter wind days. Highly efficient with great lift, speed, glide and pumpability in flat or choppy water. The HA1450 has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. High lift, low drag and fast upwind Generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. High performance glide When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. Prepreg carbon technology Ultimate high-performance composite material DETAILS UPWIND SPEED AND EFFICIENCY FOR WINGFOILING The biggest single thing that our high aspect front wing brings to the table for wing-foiling is windward performance. These wings beat upwind like nothing else. HIGH LIFT, LOW DRAG AND PUMPABILITY The high aspect Sonar Wing has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. HIGH PERFORMANCE GLIDE When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. PREPREG CARBON TECHNOLOGY Ultimate high-performance composite material    

HIGHLIGHTS High lift, low drag and pumpability High performance glide Prepreg carbon technology WHERE IT THRIVES Flat or choppy water WHAT RIDERS SAY "The HA1250 is so efficient I've lost count of how many waves I can connect" - Jesse Richman Wing / Surf / SUP The High Aspect HA1250 beats upwind like nothing else. The ultimate front wing for wing-foiling at speed, the HA1250 boasts high lift, speed, and glide in flat or choppy water. Exceptional efficiency and pumpability allows you connect wave after wave when prone or SUP foil surfing. It’s high wingspan to chord length ratio and relatively thin profile is similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. The Sonar HA1250 is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. High lift, low drag and pumpability The high aspect wing has a high wingspan to chord length ratio with a relatively thin profile to generate maximum efficiency and lift. Slightly longer radius turn than a lower aspect ratio wing of the same size. High performance glide When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. Prepreg carbon technology Ultimate high-performance composite material DETAILS UPWIND SPEED AND EFFICIENCY FOR WINGFOILING The biggest single thing that our high aspect front wing brings to the table for wing-foiling is windward performance. These wings beat upwind like nothing else. HIGH LIFT, LOW DRAG AND PUMPABILITY The high aspect Sonar Wing has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. HIGH PERFORMANCE GLIDE When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. PREPREG CARBON TECHNOLOGY Ultimate high-performance composite material

HIGHLIGHTS Performance crossover wing for heavier riders or lighter winds Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "Excellent for kiting or surfing and good for winging." - George Hradil Wing / Surf / SUP / Kite / Wake The new reflexed 1850R front wing gives you impressive control throughout the entire speed range, with extreme top-end speeds for such a large wing and an unbelievably low stall speed. Also a true crossover wing, the 1850R has more lift than the 1500R. In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability and prevent your board’s tendency to nose up strongly when you first get going. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 1850R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 1850R feels smaller than it is in terms of speed range and responsiveness. Performance crossover wing for heavier riders or lighter winds In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able. Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. DETAILS PRE-PREG CARBON TECHNOLOGY Ultimate high-performance composite material PERFORMANCE CROSSOVER WING FOR HEAVIER RIDERS OR LIGHTER WINDS In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able. REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.  

MASTS & FUSELAGES CARBONSIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90 / 105/78 / 105/90 Vous souhaitez progresser, améliorer vos performances sur l’eau ? Nos nouveaux Foils en carbone n’attendent que vous ! Ces foils, qui ont bénéficié de deux ans de R&D, ne sont pas seulement ultra performants, mais également conçus pour vous accompagner dans votre progression.Chaque prototype à fait l’objet d’un intense travail de R&D, de simulation, de tests sur l’eau pendant plusieurs mois, afin de ne laisser aucun détail au hasard. Nous voulions nous assurer que les mâts et fuselages en carbone ne soient pas seulement solides et performants, mais qu'ils puissent également supporter les contraintes exercées par les foilers qui repoussent les limites des figures aériennes. Avec 5 longueurs de mâts et 3 fuselages, cette gamme offre à tout pratiquant la possibilité de trouver le foil adapté à ses besoins.Choisissez votre longueur de mât et fuselage carbone en fonction de votre niveau, des conditions et de votre discipline préférée :Options de mât :- 60cm - taille préconisée pour les eaux peu profondes- 75cm - Polyvalent / Débutant / Freestyle - Idéale pour la plupart des Foilers qui pratiquent en Wing sur lac, pour débuter et suffisamment compacte pour les premières manœuvres aériennes. Pour les Prone et SUP Foilers de tous niveaux dans les petites vagues.- 82cm – Polyvalent / Surf / Freestyle / Downwind - Un mât « unique » pour les foilers qui cherchent le mélange parfait entre un mât compact pour le freestyle, mais suffisamment long pour le surf et la houle. Pour le Prone et le SUP Foil dans les vagues moyennes. Pour le Freestyle Foil en windsurf.- 90cm - Freeride / Surf / Downwind - Pour les foilers qui recherchent l'espace additionnel qui permet d’optimiser le confort dans le clapot et la houle haute mer. Taille idéale pour les windsurfers.- 105cm - Freerace - Pour les foilers qui cherchent un mât suffisamment long atteindre des vitesses extrêmes en haute mer et dans des conditions difficiles.Options de fuselage :- 68cm - "Confirmé" - Surf / Freestyle - Pour les pratiquants confirmés, qui recherchent une planche ludique, réactive dans les changements de direction et nerveuse dans les pop pour les moves aériens. Foilers confirmés en Prone ou en SUP Foil.- 78cm - "Polyvalent" - Débutant / Freeride / Pump - Pour les Wing Foilers de tous niveaux, de l'initiation au perfectionnement, avec la possibilité de s'adapter à chaque besoin, même à ceux qui souhaitent s’aligner en course. Pour les Prone et SUP Foilers de tous niveaux dans le petit surf, qui recherchent un foil facile et stable, doté d’un fort potentiel en pumping.- 90cm - "Windsurf" Polyvalent - Pour les windsurfeurs en Foil de tous niveaux, qui cherchent un fuselage facile, stable, qui offre un grand contrôle même à vitesse élevée.

ALU MAST 45 > 95 CM The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).  

ULTRALIGHT STRAPS SURF / FOIL BOARDING SIZES: ONE SIZE Designed for riders looking for a great, user friendly and simple strap for foiling or kite surfing, the Ultralight strap is a minimal coverage strap that provides maximum board connection. The comfortable and lightweight footstrap keeps you locked in with a direct feel. The Ultralight non-adjustable strap gives you the perfect fit and foot placement stability when you ride. Features: Ultra lightweight construction Maximum comfort Minimal water absorption Molded dual density foam prevents collapsing 3 strap Option with included hardware options for both Foam Core and Wood Core Boards. 2 Strap Option with included hardware options for both Foam Core and Wood Core Boards.

Flat, loose and even faster, the new S178 Stabilizer is a high-speed upgrade to the Sonar Foil System for experienced riders. We recommend pairing the S178 with Front Wing size HA950, or smaller. The S178 has a higher aspect ratio than the S208. Features Top mounted for early breach recovery​ Carbon pre-preg construction​ Thin profile section for reduced drag​ Materials Pre-Preg Carbon

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 600mm mast is the most common mast that you will start putting hours on. You will ride it for a while before you move up to a taller mast, when you SUP, Surf, Downwind, Wake or Kite. Some riders might never need a taller mast, depending on their style, local conditions or discipline or riding. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 450mm foil mast is ideal for your first flights, while you are learning how to start to foil. Most riders spend only a few hours or less on the shortest foil mast we make (450mm) before they graduate to the longer foil masts. Other mast sizes available: 450mm (15.6 inches) 600mm (23.6 inches) 680mm (26.6 inches) 750mm (29.5 inches) 820mm (32.2 inches) 900mm (35.4 inches) 1050mm (41.3 inches)

Mast Top Plate + Alu Mast 75 cm +  Titan Mast Foot   ALU MAST 45 > 95 CM The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).

Q01K NOT INCLUDED (KRAKEN QUICK RELEASE) Kraken Mast Plate Kraken Modular System ALL-ROUND Connection SystemKraken Modular System The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T03K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle. This Plate has been designed for maximum lightness and strength. It has been milled directly in our factory starting from premium aluminum ingots and then it has been deeply anodized by certified partners. The Kraken Mast Plate also makes it possible to upgrade your set-up with the quick release system (Q01K), thanks to which you can assemble and disassemble your hydrofoil in a few seconds, without losing the configuration on the board.

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 680mm is the most common foil mast length for prone surf foiling and all round SUP. If there is one size mast for SUP, prone surf, or wake foiling, the 680mm mast will be your choice. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)