SIZES: 40 | 50 | 60 | 75 | 85 | 95 | 110 | 125 | 140WING-SURFING/FOIL SURF 3K CARBON/WOOD CNC EPS CORE CONSTRUCTION• Lightweight CNC cut EPS core• High density deck-to-bottom foil track system with carbon reinforcement• Full 3K carbon deck with wood sandwich and double wood in the stance area• 3K carbon reinforced wood sandwich bottom• Kevlar reinforced rails• Carbon strip bottom stringerEVA DECK• Diamond diecut EVA pad with micro dot embossing• Back foot arch support• Beveled tail kick areaFOOTSTRAP INSERT LAYOUT• Minimum stance width widened by 5 cm• 6 hole inserts for front strap positions• Layout allows for dual strap setup (back strap straight - front strap angled forgoofy or regular stance)• Windsurf style 3 strap setup• Front: parallel double strap setup FEATURES FOR S26• Due to their higher volume-to-length ratio and the option to ride withstraps, the 40, 50 and 60 liter boards have gained in popularity. Those sizeshave been fine-tuned to be used for both Wing-Surfing and surf foiling.The foil track boxes and the tail kick were moved 1.5 inches towards the tailto increase options for lighter riders mounting their foils for surf foiling.• All models have a decreased nose and tail width. This is more apparent onthe smaller sizes up to the 95 and only sightly visible for sizes above 95.The result is reduced swing weight, benefiting its use with the Wing-surfer,especially in windier conditions.• The foil track positioning has been moved closer to the tail on all sizes.This adjustment is more significant on the smaller sizes than on the biggersizes.• The tail kick was moved further back to align with the foil track boxes,lengthening the water line which results in earlier lift off.• The double concave nose shape was accentuated, softening re-entry whencoming off the foil.

1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET   UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET

Versatile and progressive, the IC6 300 stabilizer is the perfect match for the IC6 950 and GRAVITY FCT front wings. Equipped with generous winglets, this stabilizer offers fantastic control with enough surface area that will help you feel fully confident in all situations. Versatile, intuitive, and predictable Large range of use Built with the IC6 technology, it is very durable and designed to be securely mounted on F-ONE fuselages. Its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you maneuver your foil more easily. Ref. 77207-0301 Recommended Plane:

WingAir SE PURE WING FOILING Our pure wing foil inflatable. The compact hull and JP’s superior construction provide a stiff feel when flying on the foil. It is super user friendly because it provides all advantages of inflatables: comfortable and smooth on your skin and knees, light and small for easy transport and storage. More on inflatables? See below...There is no better JP board when it comes to pleasurable, enjoyable and hassle-free winging in light winds. Pure wing foiling fun!Top recommendation: The NeilPryde Glide foil fits perfectly and is our first choice – the Glide Wind for beginners and/or heavy weights (for its ease, control and steady lift), the Glide Surf for light and/or advanced riders (for its agility and life).The two sizes from last year (5’4”x27.5” and 6’0”x28.5”) are now partnered with a smaller 5’0”x27.5”. All boards feature footstrap positions for wing-foiling and foiling.   Inflatables have clear advantages over hardboards: They are super comfortable and user friendly as they are easy to transport and store. These JP inflatable wing foil boards are specially developed and equipped for early take-off, featuring hard rails, Triple Layer Composite Drop Stitch and more. Additionally, they come in JP’s superior welded technology. Welded Technology: This heat-welded connection was introduced last year and proved to be successful. It creates a very strong mechanical joint that literally fuses two parts into one and thus is superior to the standard gluing. This welding process of amalgamating two different layers into one makes the board safer, lighter and stiffer. Hard Rails: In the tail, the specially developed, super clean hard rails are covered by a fibre reinforced layer of PVC cloth and create a smooth and efficient water release. Thus, the board picks up speed to take-off easily. Touchdowns are smooth and comfortable. Triple Layer: They come with Pre-Laminated Triple Layer Composite Drop Stitch, Fibre Reinforced Stringers in deck and bottom and Welded Rails and will surprise you with their stiffness. Track Foil Plate: The board features a Track Foil Plate of the same size as on our hard boards providing a big range of foil placement. The G10 material adds additional longitudinal stiffness to the hull. On the other hand, this plate is not too long – thus you don’t need an oversized bag but it can still be folded easily into a normal size SUP backpack. Footstraps: The boards come with three easy-to-mount footstraps for wing foiling. Comfort: The hull’s soft skin is covered with a large, slip-proof EVA sheet for unmatched comfort and a safe stance. You also don’t have to worry about mistakes anymore because you won’t get hurt when falling on it. Transport and Storage: Rolled up, the boards fit into a backpack – no more need for a car with roof rack for transport or a big garage for storage. In times when airlines are hesitant to accept windsurf equipment, the boards’ backpack dimensions are a major advantage!  ADDITIONALLY INCLUDED ACCESSORIES * 3 straps* Pump* Repair set* User manual* Backpack PLEASE NOTE: Reduced foil track depth [13mm]. Make sure to use the right screw length for your plate mount system!MAX screw length = 13mm + Plate Thickness All JP foil boards come without screws to attach the foil. Reason: The screw length has to match the plate thickness which varies from foil and brand, so, screws are provided by the foil brand. Note: This inflatable JP board features a special G10-track-plate requiring shorter screws, than all our JP composite boards.For example:The screws supplied with NP foils fit all JP composite boards. But these screws are too long for this inflatable!Therefore, NeilPryde now also offers a set of four M8x20 screws (titan, torx key head) in their spare parts range.

SUP DOWNWIND / WING LIGHTWIND   Effizienz ohne Kompromisse! Unser Downwinder wurde komplett überarbeitet und kommt in drei schlanken und leichtgewichtigen Shapes, mit denen du einfach aufs Foil kommst und meilenweit fliegen kannst! Eines der ersten Boards, aus der Boardschmiede der Spencer-Brüder Finn und Jeffrey. Nachdem sie zum Team Duotone gestoßen sind, war das neue Design der Downwinder-Shapes ihr erstes Projekt. Das Ergebnis sind sportliche, schnelle und schmale Designs mit effizientem Gleitverhalten, die mit nur wenigen Paddelschlägen auf die kleinste Bodenwelle beschleunigen. Für 2024 gibt es vier Modelle – von 6'4" x 19" und 6'10" x 20" über das mittelgroße 7'2" x 21" bis hin zum stabilen und leichten 7'8" x 22,5", in den Größen 85, 95, 115 und 135 l. Mit einem niedrigen Rocker, einer gestreckten Outline und sauberen Bodenkonturen lassen sich die Boards unglaublich leicht auf Startgeschwindigkeit bringen. Einmal in Bewegung, lassen sich die schlanken Pin Tails mit ausgeprägten Rail Facetten bei den größeren Modellen leicht ins Wasser drücken, um das Board und das Foil für den Take-Off aufzupumpen. Die abgerundeten Rails im Nose-Bereich neigen weniger dazu zu verkanten und das Board in ungewollte Richtungen zu lenken. Das macht den Take-Off und die Touchdowns fehlerverzeihend und neutral, so dass du dich voll und ganz auf die Bumps konzentrieren kannst anstatt auf dein Board. Durch die sensationellen Gleiteigenschaften und die schnelle Beschleunigung ist der Downwinder auch eine echte Waffe zum Wing Foiling bei Leichtwind! Durch die leichtgewichtige 100% Carbon-Konstruktion sind diese Boards entsprechend empfindlich, aber da das Gewicht des Boards für die Paddel-Performance entscheidend ist, haben wir uns bewusst für diese kompromisslose Technologie entschieden.

Flat, loose and even faster, the new S178 Stabilizer is a high-speed upgrade to the Sonar Foil System for experienced riders. We recommend pairing the S178 with Front Wing size HA950, or smaller. The S178 has a higher aspect ratio than the S208. Features Top mounted for early breach recovery​ Carbon pre-preg construction​ Thin profile section for reduced drag​ Materials Pre-Preg Carbon

FUSION ALLOY TOP PLATE MKII HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast. Features: Precision CNC machined aircraft grade, anodized 6061-T6 aluminium Incredible torsional stiffness  

3 Pieces / 3 Stück

JET FOIL RANGE:   Jet 1050 + 1250 Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 back wing, which gives the complete setup more intuitive turning and response for pumping. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong.   Jet 1650, 2000, 2450 The Jet 1650, 2000, and 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling. These wings are paired with the Stabilizer 450 back wing, which gives the complete setup more lift at lower speeds and is optimized for improved turning and pumping performance.

SPIRIT CARVE 950 / 90 CARVE / FREERIDE Un carving tout en douceur et une manœuvrabilité parfaite, c’est le Spirit Carve. CARACTÉRISTIQUES PRINCIPALES DUOTONE SPIRIT CARVE MEILLEUR CARVING CARVING DOUX ET MAÎTRISÉ DANS TOUTES LES SITUATIONS. HAUTE MANŒUVRABILITÉ ET GLISSE EXCELLENTE DIFFÉRENTS RAYONS DANS LES TURNS ET TACKS ET DE LONGUES GLISSES EN TOUTE SIMPLICITÉ POUR DES MOMENTS DE JOIE À L’ÉTAT PUR. PASSAGE DE VAGUES RAPIDE DANS LES VAGUES, LE CARVE ACCÉLÈRE DE MANIÈRE PRÉVISIBLE ET FACILITE LE PASSAGE DE VAGUES. NOUVEAU FUSELAGE EN ALUMINIUM AVEC UNE AJUSTEMENT PRECIS POUR LE RACCORDEMENT AU MÂT UN NOUVEAU FUSELAGE EN ALUMINIUM UNIQUE AVEC AJUSTEMENT TRÈS PRÉCIS ENTRE LE MÂTE ET LE TALON ASSURE UNE RIGIDITÉ MAXIMALE ET LA MEILLEURE TRANSMISSION DES IMPULSIONS DE PILOTAGE. NOUVEAU PRODIL DE MÂT AVEC LONGUEUR DE CONNEXION PLUS LONGUE LE NOUVEAU PROFIL DE MÂT AVEC PLUS DE LONGUEUR DE CONNEXION ÉLIMINE LA VENTILATION À VITESSE ÉLEVÉE. AILES AVANT ET ARRIÈRE EN CARBONE AILES AVANT ET ARRIÈRE EN CARBONE PUR POUR DES PERFORMANCES MAXIMALES ET UN LOOK SPLENDIDE. DÉTAILS DUOTONE SPIRIT CARVE Le nouveau foil 950 Spirit Carve a été développé pour offrir une manœuvrabilité et une glisse maximales, et pour permettre de réaliser des tacks, des jibes et des 360°. Il s’agit d’une version réduite de foil de surf pur. La 950 se lève rapidement et offre une stabilité incroyable pour des carves doux et maîtrisés sur de petites vagues ou en eau calme. Le foil offre maîtrise, carving, glisse et des transitions parfaites avec une stabilité incroyable et une grande prévisibilité pour ceux qui recherchent un mélange de sensations entre le kite et le foil de surf.

Insane response. Incredible performance. Our highest quality pre-preg carbon modular foil edition provides a stiffer, more direct feel and more immediate feedback. Engineered with exceptional stiffness for all disciplines, the CF Edition is made from lightweight and durable carbon pre-preg components and has a reduced swing weight for an agile, dynamic and direct feel, and great pumpability. The refined one-piece mast design is tapered for optimal load transfer and lower surface friction, and features our unique GeoLock system. The longer CF85 mast increases overall ride performance in choppy conditions. The CF72 mast is ideal for shallower waters, prone surf foiling and towing. For 2022 we’ve added stability, performance and efficiency with the 700mm Carbon Pre-Preg Fuselage and new S270 Carbon Pre-preg Stabilizer.    Carbon CF72 or CF85 Mast with cover, C700 Fuselage, S270 Stabilizer with cover, Tool Kit, Sonar Fuselage Screw Pack B (M8x35 Screws, M8 Flat Washers), Sonar Stabilizer Screw Pack C (M8x16mm)*, Sonar Travel Bag   Features Sonar CF85 or CF72 Mast GeoLock Load Bearing Connection NEW S270 Carbon Stabilizer with easy breach recovery Industry-standard 165x90mm bolt pattern C700 Carbon Fuselage Modular foil system Supplied with Sonar CF Edition Travel Bag Front Wings Sold Separately Foil to board mounting screws sold separately

Adjustable 2 Strap SetIncl. Hardware Options for both Foam Core (M6 screws) and Wood Core Boards (self cutting screws)

THE DOWNWINDER AIR IS THE TRAVEL FRIENDLY AND DING RESISTANT VERSION OF OUR DOWNWINDER SLS COMPOSITE MODELS.Featuring a stretched pin-tail design for efficient glide, instant acceleration, and take-off speed. The Downwinder Air models are reduced in weight and features compared to our Sky Air models, making the board weights comparable to their composite siblings. This makes them easy to paddle up for SUP Downwinders and incredibly efficient for light wind Wing Foiling. We’re offering three dedicated shapes in 6‘10’’ x 20“ (105l), 7‘4’’ x 21“ (115l) and 7‘10’’ x 22.5“ (125l). The rocker line has been tested across a spectrum of conditions from flatwater to substantial ocean swells and demonstrates exceptional adaptability and reliability. With great stiffness from the light fusion technology and our solid carbon plate, there’s hardly any distortion to the boards shape. Pumping through flat sections is surprisingly easy with the Downwinder Air, making it a real alternative to our high-end composite models when you don’t have the car, the storage or the budget for the Downwinder SLS – or you simply want to travel easy.

HA 1125... TAKING PERFORMANCE, SPEED AND GLIDE TO THE NEXT LEVEL! Performance, speed and glide have been taken to the next level with the High Aspect 1125. It was developed with key design input from Pete Burling, helmsman of Team New Zealand’s Americas Cup yacht (Current AC holders) and tested by legendary sailor, Jimmy Spithill. Pete, Jimmy and Armie became friends as foiling united their search and passion for ultimate performance and glide on downwind runs. The mad scientist and these high-performance sailing gurus have collaborated to create something the likes of which has not seen before outside the Americas Cup! At 9.8:1 it’s a true High Aspect ratio foil wing that sets the standard for glide performance, while retaining enough handling that it can be turned easily, making for an exhilarating ride. Downwind aficionados requiring max glide performance will want to get their hands on this wing simply because it is next level! In small surf on an 85cm mast or longer, the HA1125 can be ridden to good effect, the turning radius is surprisingly good for is high aspect ratio. The sleek, inflected tips help prevent ventilation even if a tip breaches. It’s next level pump and glide make it easy to double dip! For experienced wingers there is no comparison. It makes tacking fun and easy as the glide gives you so much time to complete maneuvers like 360’s. Combine this with amazing upwind angles and outrageous downwind glide, as well as freakish light wind performance and the riding it just never stops! Construction Construction is based around a high-density foam core, which is wrapped with 100% IM and High Modulus Carbon.  The main wings are shaped and refined for maximum stability and predictability at all speeds The foil sections have been carefully designed by one of the world’s foremost sport wing designers. DimensionsArea: 1125 cm2Wingspan: 1050 mmWeight: 955 gramsAspect Ratio: 9.8

Naish S25 Jet Foil Complete 2450 The Naish S25 Jet Foil Complete 2450 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performance To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system. Jet 2450 is ideal for riders +250 lbs Performance Features Jet 2450 Front Wing = Optimized early lift at low speeds Stabilizer 450 Back Wing = Early lift & intuitive turning 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response Construction Features Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts Jet 2450 - 3 x 30mm & 2 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant Tech Specs SizeFront Wing DesignAspect RatioWingspanProjected Surface Area 75 cm Jet 2450 4.1 39.4"/100 cm 380 in²/2450 cm²   Naish S25 Jet Foil Complete 2450

We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all.  Features Recommended with S215 Stabilizer Super low stall speed Effortless pumping Surf-style turning (smooth rail to rail and surf yaw snap) Forgiving and accessible for faster progression Materials Pre-Preg Carbon Titanium Screws

When we look to the horizon, it ignites our desire to progress and a thirst to overcome challenges – it awakens the voyager within. An evolution of surfing, with downwinding, the entire ocean becomes our playground. The Horizon generates board speed efficiently. The faster you move in the water, the quicker you lift up onto the foil. The displacement hull design allows the nose to penetrate the water without slamming, so you can pump the board in sync with the pumping of the foil. The Horizon is a long, narrow board designed for riders downwinding with a paddle, prone, with a wing or tow-kite, for SUP foil-surfing or for lightwind wingfoiling.  FeaturesEfficient displacement hull design for quick pump-to-foilLightweightstrong and durable full-carbon constructionPulled-in tail for tracking and efficiency on takeoff and touchdownForgiving forward railssharper behind the foil for fast-releaseSlightly concaved deck under the standing section for stabilityComfortable EVA deck pad with raised rail edges and extended tail pad for wingfoilingDropBox adjustable fast foil mountingDownwind with a paddleLight Wind Wing FoilingSUP Foil SurfingMaterialsCarbon Technology

Sabfoil Gullwing 380 Pro Finish | Hydrofoil Stabilizer MAIN SPECS Surface: 180 cm2 AR: 8,10 Wingspan: 380 mm Chord: 60 mm Range Gullwing Stabilizer-Fuselage Connection Standard This fast and versatile stabilizer is ideal for all those who want to increase the control and stability of their hydrofoil. The gullwing shape guarantees good directionality while riding without sacrificing maneuverability when needed.   The S380/PF is delivered with SAB Pro Finish, and thus hand sanded to achieve a matte surface with 0-thickness graphics, for an elegant Made in Italy product with maximum performance.

The foils of the PHANTOM line are designed to glide effortlessly when pumping or connecting waves and prove themselves very agile and precise when surfing and winging. Aspect Ratio: 6.0 Speed and glide Radical turns and agile carving Efficient pumping and planing start Incredible freestyle abilities Available in 980 cm²/1080 cm² / 1280 cm² / 1480 cm² / 1780 cm² Sets: FW PHANTOM CARBON 980 + FUSELAGE CARBON XXS + STAB C250 FENCE + TOOL TORX T30 FW PHANTOM CARBON 1080 + FUSELAGE CARBON XXS + STAB C250 FENCE + TOOL TORX T30 FW PHANTOM CARBON 1280 + FUSELAGE CARBON X-SHORT + STAB C275 SURF + TOOL TORX T30 FW PHANTOM CARBON 1480 + FUSELAGE CARBON SHORT + STAB C275 SURF + TOOL TORX T30 FW PHANTOM CARBON 1780 + FUSELAGE CARBON SHORT + STAB C275 SURF + TOOL TORX T30 Connecting waves while wing foiling, surfing or even downwinding is easy and fun with the PHANTOM CARBON foil. Carving is also part of its DNA, as connecting waves isn’t much fun if you can’t turn properly. By working on the lift distribution, arch shape, and other details, we reached a performing foil that can carve smooth curves on the waves and swells. The PHANTOM CARBON range is well-balanced and will satisfy a broad variety of riders thanks to its wide size range and huge potential. These foils have it all and do everything well: a satisfying glide, a great planing start, and amazing carving abilities. The PHANTOM 980 is the newest size in this range. This is a high-performance foil that will allow you to take your skills to the next level in surf foil or wing foil, while maintaining good carving and pumping abilities. The PHANTOM 1080 is the ideal front wing for surfing due to its speed-to-lift ratio that will allow you to keep up with the wave and surf it for as long as possible. It is surprisingly easy to use, but also provides incredible performances in speed, carving and pumping when needed. The PHANTOM 1280 provides a similar program to the 1480 but is more versatile. It carves better, goes faster, and is a good combination of planing and performance for wing foil. It is also suitable for lighter riders (< 70 kg). The PHANTOM 1480 combines efficiency and accessibility. Its lift allows you to glide endlessly while having fun thanks to its incredible maneuverability and stability. It is an ultra-versatile foil that will allow you to surf in waves < 1m50, venture downwind, wing foil, or even try dockstarts or wakefoil… It does everything well and will be there for you even in weak conditions. The PHANTOM 1780 offers the highest lift of the range. The program is the same as the smaller sizes, but this foil is more adapted for heavier riders (> 85 kg). It is a large and stable wing that remains highly maneuverable, and that will bring extra power in light winds. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport. The PHANTOM CARBON 980 and 1080 are recommended with the C250 SURF or C250 FENCE. This stab has been thought out to perfectly exploit the power and abilities of these PHANTOM. Sharp and precise, it will allow you to gain speed and maneuverability, and to easily connect waves. The 1280, 1480, and 1780 are better suited for a C275 SURF stab. Progressive and versatile, this stab will bring stability, control, and confidence to your ride.          

Wing / SUP / Prone // Beginner: 82/76-1750/250 /// Intermediate: 82/66-1500/250 Unser Favorit für alle Einsteiger der mittleren Gewichtsklassen zwischen 65 kg und 85 kg! Mit dem Quickmount Mast verbringst du weniger Zeit beim Schrauben und mehr Zeit auf dem Foil. Das gutmütige und gleichzeitig aufregend zu fahrende Aero Free 1750 wirst du von den ersten Versuchen bis zum gehobenen Fahrlevel lieben.    

SPIRIT CARVE 950 / 90 CARVE / FREERIDE Un carving tout en douceur et une manœuvrabilité parfaite, c’est le Spirit Carve. CARACTÉRISTIQUES PRINCIPALES DUOTONE SPIRIT CARVE MEILLEUR CARVING CARVING DOUX ET MAÎTRISÉ DANS TOUTES LES SITUATIONS. HAUTE MANŒUVRABILITÉ ET GLISSE EXCELLENTE DIFFÉRENTS RAYONS DANS LES TURNS ET TACKS ET DE LONGUES GLISSES EN TOUTE SIMPLICITÉ POUR DES MOMENTS DE JOIE À L’ÉTAT PUR. PASSAGE DE VAGUES RAPIDE DANS LES VAGUES, LE CARVE ACCÉLÈRE DE MANIÈRE PRÉVISIBLE ET FACILITE LE PASSAGE DE VAGUES. NOUVEAU FUSELAGE EN ALUMINIUM AVEC UNE AJUSTEMENT PRECIS POUR LE RACCORDEMENT AU MÂT UN NOUVEAU FUSELAGE EN ALUMINIUM UNIQUE AVEC AJUSTEMENT TRÈS PRÉCIS ENTRE LE MÂTE ET LE TALON ASSURE UNE RIGIDITÉ MAXIMALE ET LA MEILLEURE TRANSMISSION DES IMPULSIONS DE PILOTAGE. NOUVEAU PRODIL DE MÂT AVEC LONGUEUR DE CONNEXION PLUS LONGUE LE NOUVEAU PROFIL DE MÂT AVEC PLUS DE LONGUEUR DE CONNEXION ÉLIMINE LA VENTILATION À VITESSE ÉLEVÉE. AILES AVANT ET ARRIÈRE EN CARBONE AILES AVANT ET ARRIÈRE EN CARBONE PUR POUR DES PERFORMANCES MAXIMALES ET UN LOOK SPLENDIDE. DÉTAILS DUOTONE SPIRIT CARVE Le nouveau foil 950 Spirit Carve a été développé pour offrir une manœuvrabilité et une glisse maximales, et pour permettre de réaliser des tacks, des jibes et des 360°. Il s’agit d’une version réduite de foil de surf pur. La 950 se lève rapidement et offre une stabilité incroyable pour des carves doux et maîtrisés sur de petites vagues ou en eau calme. Le foil offre maîtrise, carving, glisse et des transitions parfaites avec une stabilité incroyable et une grande prévisibilité pour ceux qui recherchent un mélange de sensations entre le kite et le foil de surf.

Infos & Characteristics Foil box features several compartments and protection flaps to protect a disassembled foil. Mast, front wing, stabilizer, screws & tools all have a specific room. There’s even a compartment for a helmet. SIZES 1100X310X200MM - 1.45KG

The Indiana Frontwing 1100 Pump is designed for light wind and small waves. It starts to fly from aprox 5 km/h. Even though this wing has a volume of over 4 liters, it is still fast. Dock starts and pumping are very easy, even for heavy riders. The stabilizer options on the new fuselage enable the angle and position of the stabilizer to be adjusted. This means that the stability and flexibility of the foil can be changed according to personal preference and skill level. Span: 110cm, Area: 2300cm2, Volume: 4267cm3, Weight: 1350g • Material: 100% Carbon, PET Foam, Epoxy • Production Technique: Steel Mold • Produced in China Includes Wing Sleeve Consists of: - Indiana Foil Front Wing 1100 P- Indiana Foil Stabilizer 550- Indiana Foil Alu Mast 75cm (with Sleeve)- Indiana Foil Baseplate Alu (incl. Zinc Anode & Screws)- Indiana Foil Set of Mast / Fuselage Screws- Indiana Foil Set of Stab Angle Adaptors- Indiana Foil Surf Fuselage (incl. Cartridge)  

The FUSELAGE CARBON is an essential complement to the F-ONE Monobloc carbon wings. It connects with the front wing behind the TITAN mast slot in an area where the loads are reduced. Still, the shape of the connection is inspired from the TITAN design and offers a very robust and stiff assembly. At the back, the cradle for the stabilizer is designed with the right angle to make the front wing fly with ease and efficiency. The FUSELAGE CARBON is built in pre-preg carbon with a foam core to keep the weight extremely light. Some solidly anchored brass inserts are used for all fastenings. Best maneuverability Better responsiveness Ultra-light carbon construction Weight: 0.18Lenght: 33 cm Our carbon fuselages are available in different sizes. A longer fuselage will bring more stability, while a shorter fuselage will help with sharp and quick turns.