Naish 2022 Foil Mast Aluminium 55 cm Naish 2022 Foil Mast Aluminium 65 cm Naish 2022 Foil Mast Aluminium 75 cm Naish 2022 Foil Mast Aluminium 85 cm Naish 2022 Foil Mast Aluminium 95 cm

FUSION H TAIL STABILISER HIGH ASPECT FOIL HS180 DESIGN Geschwungene Outline, gerade Hinterkante, schlankes Draft-Forward-Profil, moderate Anhedrale (negative V-Form) PROFIL Vielseitiges, effizientes, schnelles High-Performance-Wing-Set WING FEATURES Optimale Effizienz und Manövrierbarkeit Flacher Mittelbereich, nach unten gezogene Tips – perfekte Balance aus Halt und Agilität Nahtlos geformte Einzelteile (single molded) für minimalen Widerstand Vollcarbon-Prepreg-Konstruktion PMI-Core für optimales Härte-Gewichtsverhältnis Im Set enthalten: Stabilizer, Wing-Covers, 2 Stk. m6 ss316 Torx titanbeschichtete Schrauben Als nahtlos geformte Einzelkomponente für die Fuselage bietet der HS180-High-Aspect-Stabiliser einzigartige Effizienz und Stabilität. Präzise auf sämtliche Wings der H- und X-Series abgestimmt, garantiert er perfekte Kontrolle bei verschiedensten Drehwinkeln.

HIGHLIGHTS Lightwind Wing Foiling Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "This is the easiest to ride hydrofoil I’ve ever been on in my life." - George Hradil Wing / SUP / Surf The new 2200R reflexed wing is brilliant for lightwind wing-foiling. Unbelievable stability and slow stall speed through the turn makes learning gybes and tacks easier, giving newer riders confidence to try more manoeuvres and progress quickly. Smooth carvy turns in prone for heavier riders and in SUP foiling. Touchdowns are a breeze. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 2200R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 2200R feels smaller than it is in terms of speed range and responsiveness. Lightwind Wing Foiling A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. DETAILS INCREDIBLY STABLE Gives newer riders confidence to try more manoeuvres and progress quickly PRE-PREG CARBON TECHNOLOGY Ultimate high-performance composite material LIGHTWIND WING FOILING A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.

Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"  

The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.

Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 5´0". Für Boardgröße von ca. 155cm x 68cm Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern. Größe 5´4". Für Boardgröße von ca. 165cm x 70cm   Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 5´8". Für Boardgröße von ca. 175cm x 76cm Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 6´3". Für Boardgröße von ca. 193cm x 76cm Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern. Größe 6´8". Für Boardgröße von ca. 205cm x 78cm

The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws

FUSION ALLOY MAST FOIL 40cm 70cm 90cm DESIGN PROFILE Strapazierfähiges, langlebiges Setup aus Metalllegierung mit einzigartiger Festigkeit  RIDER PROFIL Für Rider, die ein vielseitiges und ultrasteifes Foil-System suchen MAST FEATURES 3-Schrauben-Connection für höchste Stabilität  Anodisiertes 6061-T6-Aluminum in Luftfahrt-Qualität  Präzise verlaufende Fuselage-Mast-Verbindung für optimale Stabilität  Helicoil-Inserts für minimierte Korrosion und lange Haltbarkeit  Wasserdichte, hohle Bauweise für optimales Stabilitäts-Gewichtsverhältnis   Der Fusion Alloy-Mast besteht aus stranggepresstem Aluminium in Flugzeugqualität, was zu einer unglaublich steifen und hydrodynamischen Struktur führt. Helicoil-Einsätze verhindern Salzwasserkorrosion an den Verschraubungspunkten. Der Mast lässt sich nahtlos in alle 9-cm-Industriestandard-Foilboxen integrieren.

HIGHLIGHTS Performance crossover kite/surf/wing foil Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "That feel... relax, glide. It’s a new day so enjoy it." - Daniel Kereopa Kite / Surf / Wing / SUP / Wake The Sonar 1500R is a true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R is great for prone foil surfing in medium to large waves, has a smooth carvy feel and fits nicely in the pocket. Its predictable lift gives you time to find a comfortable stance without fighting to keep the nose down as the foil accelerates. So you’re able to remain in the same position over the entire speed range. The balance of the foil system means you can place your back foot further behind the mast, letting you ride the board more like a shortboard. Our new, specialised reflexed-camber foil section design gives the wing pitch stability and prevents your board’s tendency to nose up strongly when you first get going. Thus, it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness. A reflexed wing gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. Performance crossover kite/surf/wing foil A true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R has a smooth carvy feel and fits nicely in the pocket. Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. TIGHT CARVING AND SNAPPY TURNS Low to medium aspect ratio swept wing for maximum fun on and off the waves, with a low stall speed. PRE-PREG CARBON TECHNOLOGY​ Ultimate high-performance composite material PERFORMANCE CROSSOVER KITE/SURF/WING FOIL A true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R has a smooth carvy feel and fits nicely in the pocket. REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL SPEED AND INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.    

FUSION CARBON MAST FOIL / LIGHTWEIGHT 70cm 80cm DESIGN PROFILE Perfektes Härte-Gewichtsverhältnis, niedriges Angleitprofil RIDER PROFIL Für Rider, die nach einem 100% Carbon, ultra-steifem und ultra-leichtem Mast suchen MAST FEATURES Integrierte Base-Plate für herausragende Stabilität und reduziertes Gewicht  I-beam Vollcarbon-Prepreg-Konstruktion  PMI-Core für einzigartiges Härte-Gewichtsverhältnis Präzise verlaufende Fuselage-Mast-Verbindung für optimale Stabilität  Angeschrägte Sehne reduziert den Widerstand 3-Schrauben-Connection mit Gewindeeinsätzen aus Messing Der Fusion Carbon-Mast stellt Performance über alles.  Die Prepreg Vollcarbon-Konstruktion sorgt für wahnsinnige Steifigkeit in einem leichten Paket. Der Mast lässt sich nahtlos in alle 9-cm-Industriestandard-Foilboxen integrieren.

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 900mm mast is the choice of big wave enthusiasts and tow-ins, when combined with the 680mm front wing. It's also the choice of downwinder pros when competing in open ocean swell. The AXIS 900mm mast is the main size mast for wind foilers and kite foilers, when they reach they are are not beginners any longer. Other mast sizes available: 450mm (15.6 inches) 600mm (23.6 inches) 680mm (26.6 inches) 750mm (29.5 inches) 820mm (32.2 inches) 900mm (35.4 inches) 1050mm (41.3 inches)

HIGHLIGHTS High lift, low drag and fast upwind High performance glide Prepreg carbon technology WHAT RIDERS SAY "The big function of the High Aspect wing is upwind performance - it’s perfect for wingfoiling in flat or choppy water." - George Hradil Wing / SUP The new HA1450 is the bigger brother of the HA1250, designed for a heavier rider or lighter wind days. Highly efficient with great lift, speed, glide and pumpability in flat or choppy water. The HA1450 has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. High lift, low drag and fast upwind Generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. High performance glide When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. Prepreg carbon technology Ultimate high-performance composite material DETAILS UPWIND SPEED AND EFFICIENCY FOR WINGFOILING The biggest single thing that our high aspect front wing brings to the table for wing-foiling is windward performance. These wings beat upwind like nothing else. HIGH LIFT, LOW DRAG AND PUMPABILITY The high aspect Sonar Wing has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. HIGH PERFORMANCE GLIDE When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. PREPREG CARBON TECHNOLOGY Ultimate high-performance composite material    

MASTS & FUSELAGES CARBONSIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90 / 105/78 / 105/90 Wenn du bereit bist für das nächste Fahrlevel sind unsere neuen Carbon Masten und Fuselages deine erste Wahl! Nach fast zwei Jahren Forschung und Entwicklung sind sie nicht nur enorm leistungsfähig, sie sind auch so konzipiert, dass sie den Einschlägen standhalten, die mit deinem steigenden Niveau einhergehen.Mit viel Liebe zum Detail, allerhand Simulationen und unzähligen Stunden auf dem Wasser wurden diese Masten und Fuselages von unserem Ingenieursteam entwickelt und von unseren Teamridern auf Herz und Nieren getestet. Wir wollten sicherstellen, dass sich unser Carbon Setup nicht nur solide anfühlet und die erwartete Leistung liefert, sondern auch den Kräften der Rider standhält, die ans Limit gehen. Fünf Mastlängen und drei Fuselages halten für jeden Foiler die passende Kombination bereit.Wähle die Carbon-Mastlänge und Fuselage je nach Fähigkeiten, Bedingungen und der bevorzugten Disziplin:Mast Optionen:• 60 cm – spezielle Größe für Flachwasser• 75 cm – All-round / Entry / Freestyle - Die ideale Größe für die meisten Wing Foiler auf Seen, großartig für den Anfang und sehr kompakt für progressive Air Moves, sowie für Prone und SUP Foiler aller Niveaus in kleinen Wellen.• 82 cm – All-round / Surf / Freestyle / Downwind - "One for all Mast" für Wing Foiler, die den perfekten Mix aus Kompaktheit für Freestyle und Länge fürs Surfen in der Welle suchen. Prone und SUP Foiler in mittelgroßen Wellen. Freestyle Windsurf Foiler.• 82 cm Fanatic x Duotone COLLAB – Surf / Freestyle - Unser High Modulus Team Edition Mast für Wing Foiler, die auf der Suche nach maximaler Leistung sind. Basierend auf dem Duotone SLS Kite-Mastprofil mit High Modulus Carbon-Layup, ist dieser Mast perfekt für den fortgeschrittenen Winger, der konstant Flügel unter 100 cm Spannweite verwendet.• 90 cm – Freeride / Surf / Downwind - Wing Foiler, die den zusätzlichen Raum für Komfort bei Kabbelwasser, Wellengang und offenem Meer suchen. Standardgröße für Windsurf Foiler.• 105 cm – Freerace - Wind und Wing Foiler, die einen extra langen Mast suchen, um auch bei rauenBedingungen auf offener See Höchstgeschwindigkeiten zu erreichen.Fuselage Optionen:• 68 cm – “Advanced” – Surf / Freestyle - Fortgeschrittene Wing Foiler, die ein spielerisches Fahrverhalten mit reaktionsschnellem Drehverhalten und viel Pop für Air Moves suchen. Fortgeschrittene Prone und SUP Foiler.• 78 cm – “All-round” – Entry / Freeride / Pump - Wing Foiler aller Niveaus, vom Einsteiger bis zum Fortgeschrittenen, mit der Möglichkeit der Anpassung an die Bedingungen und an das Fahrlevel, sowie Winger mit Race-Ambitionen. Prone, SUP und Pump Foiler, die ein einfaches und stabiles Flugverhalten mit großartigen Pumpeigenschaften suchen.• 90 cm – “Windsurf” All-round - Windsurf Foiler aller Könnensstufen, die ein einfaches und stabiles Fahrverhalten mit guter Kontrolle auch bei höheren Geschwindigkeiten suchen.

HIGHLIGHTS High lift, low drag and pumpability High performance glide Prepreg carbon technology WHERE IT THRIVES Flat or choppy water WHAT RIDERS SAY "The HA1250 is so efficient I've lost count of how many waves I can connect" - Jesse Richman Wing / Surf / SUP The High Aspect HA1250 beats upwind like nothing else. The ultimate front wing for wing-foiling at speed, the HA1250 boasts high lift, speed, and glide in flat or choppy water. Exceptional efficiency and pumpability allows you connect wave after wave when prone or SUP foil surfing. It’s high wingspan to chord length ratio and relatively thin profile is similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. The Sonar HA1250 is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. High lift, low drag and pumpability The high aspect wing has a high wingspan to chord length ratio with a relatively thin profile to generate maximum efficiency and lift. Slightly longer radius turn than a lower aspect ratio wing of the same size. High performance glide When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. Prepreg carbon technology Ultimate high-performance composite material DETAILS UPWIND SPEED AND EFFICIENCY FOR WINGFOILING The biggest single thing that our high aspect front wing brings to the table for wing-foiling is windward performance. These wings beat upwind like nothing else. HIGH LIFT, LOW DRAG AND PUMPABILITY The high aspect Sonar Wing has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. HIGH PERFORMANCE GLIDE When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay. PREPREG CARBON TECHNOLOGY Ultimate high-performance composite material

MASTS & FUSELAGES AL 3.0SIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90 Unsere stark verbesserten AL3.0 Masten und Fuselages sind unglaublich steif und direkt, fast 20% leichter und kommen mit verbessertem Strömungsverhalten als die Vorgängermodelle. Ein neuer Trimm macht die Foils deutlich verspielter ohne Abstriche bei der Nutzerfreundlichkeit einzugehen.Unser Team hat nicht nur monatelang auf dem Wasser getestet, die Entwickler unserer Foils haben die Kräfte, Geschwindigkeiten und unterschiedliche Anströmwinkel der verschiedenen Situationen beim Foilen analysiert und auf dieser Basis ein neues Mastprofil und Fuselages mit deutlich geringerem Widerstand entwickelt, dabei den Trimm entscheidend verbessert und das Gewicht massiv reduziert ohne Abstriche der Festigkeit des gesamten Systems zu machen. Die AL 3.0 Foils fahren sich verspielter und direkter und decken eine noch größere Bandbreite an Bedingungen und Könnenstufen ab.Wähle die Mastlänge und Fuselage entsprechend deines Fahrlevel, der Bedingungen und deiner Präferenzen:Mast Optionen:• 60 cm – spezielle Größe für flache Gewässer• 75 cm – All-round / Entry / Freestyle - Standardlänge für die meisten Wingfoiler auf Seen. Super für den Einstieg und sehr kompaktes verhalten bei Sprüngen und Rotationen für progressive Freestyler. Surf- und SUP-Foilen bei allen Könnensstufen in kleineren Wellen• 82 cm – All-round / Surf / Freestyle / Downwind - Unser neuer Allrounder-Mast für Wing Foiler, die nach dem perfekten Mix aus Kompaktheit zum Freestylen und gleichzeitig ausreichend Länge zum Wingen in Wellen suchen. Surf- und SUP-Foiler in mittelgroßen Wellen. Freestyle Windsurf Foiler• 90 cm – Freeride / Surf / Downwind - Wing Foiler, die nach extra Länge für Komfort in Wellen und größerer Dünung suchen. Standardlänge für Windsurf FoilerFuselage Optionen:• 68 cm – “Advanced” – Surf / Freestyle - Fortgeschrittene Wing Foiler, die ein manöverorientiertes Setup mit direkten Reaktionen und hervorragendem Pop für Sprünge suchen. Fortgeschrittene Surf- und SUP Foiler• 78cm – “All-round” – Entry / Freeride / Pump - Vom Wingfoil-Einsteiger bis zum Könner, mit der Option den Back Wing entsprechend des Fahrlevels zu positionieren. Surf-, SUP- und Pump-Foiler, die nach einem einfachen Setup mit guter Kippstabilität und hervorragenden Pump-Eigenschaften suchen• 90cm – “Windsurf” – All-round - Für Windsurf Foiler aller Könnensstufen, mit einem einfachen und stabilen Flug mit viele Kontrolle auch bei höherer Geschwindigkeit

HIGHLIGHTS Performance crossover wing for heavier riders or lighter winds Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "Excellent for kiting or surfing and good for winging." - George Hradil Wing / Surf / SUP / Kite / Wake The new reflexed 1850R front wing gives you impressive control throughout the entire speed range, with extreme top-end speeds for such a large wing and an unbelievably low stall speed. Also a true crossover wing, the 1850R has more lift than the 1500R. In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability and prevent your board’s tendency to nose up strongly when you first get going. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 1850R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 1850R feels smaller than it is in terms of speed range and responsiveness. Performance crossover wing for heavier riders or lighter winds In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able. Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. DETAILS PRE-PREG CARBON TECHNOLOGY Ultimate high-performance composite material PERFORMANCE CROSSOVER WING FOR HEAVIER RIDERS OR LIGHTER WINDS In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able. REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.  

Mast Top Plate + Alu Mast 75 cm +  Titan Mast Foot   ALU MAST 45 > 95 CM The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block. The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm). A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).

Versatile and progressive, the IC6 300 stabilizer is the perfect match for the IC6 950 and GRAVITY FCT front wings. Equipped with generous winglets, this stabilizer offers fantastic control with enough surface area that will help you feel fully confident in all situations. Versatile, intuitive, and predictable Large range of use Built with the IC6 technology, it is very durable and designed to be securely mounted on F-ONE fuselages. Its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you maneuver your foil more easily. Ref. 77207-0301 Recommended Plane:

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 600mm mast is the most common mast that you will start putting hours on. You will ride it for a while before you move up to a taller mast, when you SUP, Surf, Downwind, Wake or Kite. Some riders might never need a taller mast, depending on their style, local conditions or discipline or riding. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

Flat, loose and even faster, the new S178 Stabilizer is a high-speed upgrade to the Sonar Foil System for experienced riders. We recommend pairing the S178 with Front Wing size HA950, or smaller. The S178 has a higher aspect ratio than the S208. Features Top mounted for early breach recovery​ Carbon pre-preg construction​ Thin profile section for reduced drag​ Materials Pre-Preg Carbon

Flat, loose and fast, the new S208 Stabilizer is another high performance upgrade to the Sonar Foil System for experienced riders. The S208 has a higher aspect ratio than the S210, which means less drag, and the flatter rondure (front view) enables more manoeuvrability. As we’ve increased our front wing range, we’ve needed to match the lift force of the front wing with the stabilizer. While your front wing creates vertical lift, your stabilizer has a downward acting force, which prevents the front wing from nose-diving. A larger stabilizer translates into more front foot pressure, while a smaller stabilizer equals less front foot pressure. The North stabs are mounted on top of the fuselage, which helps them to avoid turbulence from the flow of the front wing, creating a smoother ride. This top mounting also gives the rider an early breach warning - the stab pierces the water surface first, giving you a better chance of recovery before your front wing gets too high. Like the Front Wings, all Sonar Stabilizers are pre-preg carbon construction, ensuring optimal stiffness and direct performance. The thin profile section reduces drag, while the material properties help maintain structural integrity and rigidity. Stabs have a huge influence on performance. As you progress to smaller wing sizes, we recommend changing to a smaller stabilizer to be more manoeuvrable. Experienced riders will really feel the difference. A new tail can have a big impact on your style.   Features Clean undisturbed flow Flat loose and fast Easy breach recovery Thinner profile Higher aspect ratio Less surface friction for better glide Materials Carbon Pre-preg

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 680mm is the most common foil mast length for prone surf foiling and all round SUP. If there is one size mast for SUP, prone surf, or wake foiling, the 680mm mast will be your choice. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

ULTRALIGHT STRAPS SURF / FOIL BOARDING SIZES: ONE SIZE Designed for riders looking for a great, user friendly and simple strap for foiling or kite surfing, the Ultralight strap is a minimal coverage strap that provides maximum board connection. The comfortable and lightweight footstrap keeps you locked in with a direct feel. The Ultralight non-adjustable strap gives you the perfect fit and foot placement stability when you ride. Features: Ultra lightweight construction Maximum comfort Minimal water absorption Molded dual density foam prevents collapsing 3 strap Option with included hardware options for both Foam Core and Wood Core Boards. 2 Strap Option with included hardware options for both Foam Core and Wood Core Boards.